sata gondok (?)
Fórumok
hahó
egy ideje azt csinálja a(z amúgy egy hónapos) gépem, hogy minden alkalmazás lemerevedik, a hdd-led világít, az egér mozog, de a kompiz sem nagyon reagál. (gnome-terminal működik és fájlokat is tudok olvasni a diszkről, de az auto-completition már nem pl.)
ezt kb. 30mp-ig teszi, majd ez jelenik meg a rendszernaplóban:
Jan 2 19:45:23 calypso kernel: [62069.868932] ata5: hard resetting link
Jan 2 19:45:23 calypso kernel: [62070.352561] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 2 19:45:23 calypso kernel: [62070.367005] ata5.00: configured for UDMA/133
Jan 2 19:45:23 calypso kernel: [62070.367106] ata5: EH complete
Jan 2 19:45:23 calypso kernel: [62070.367249] sd 4:0:0:0: [sdb] 1250263728 512-byte hardware sectors (640135 MB)
Jan 2 19:45:23 calypso kernel: [62070.367288] sd 4:0:0:0: [sdb] Write Protect is off
Jan 2 19:45:23 calypso kernel: [62070.367343] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
smart:
pali@calypso:~/Desktop$ sudo smartctl --all /dev/sdb
smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG HD642JJ
Serial Number: S1Q0J1KQ901739
Firmware Version: 1AA01113
User Capacity: 640,135,028,736 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 3b
Local Time is: Fri Jan 2 20:02:59 2009 CET
==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for details.
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (7659) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 128) minutes.
Conveyance self-test routine
recommended polling time: ( 14) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 086 086 011 Pre-fail Always - 5230
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 69
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 407
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 69
13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0
183 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
184 Unknown_Attribute 0x0033 100 100 000 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 069 062 000 Old_age Always - 31 (Lifetime Min/Max 18/31)
194 Temperature_Celsius 0x0022 068 062 000 Old_age Always - 32 (Lifetime Min/Max 18/34)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 3281407
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 253 253 000 Old_age Always - 15
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
nekem ez nem tűnik betegnek.
a rendszer raid0-n van (tehát stripe) a home pedig raid1 (mirror)
a sata kábel egy méter hosszú, mert csak ilyen volt a boltban, de az még elvileg ok.
nekem úgy tűnik mintha eldobálná a vinyót és újra felismeri hotpluggal. de ha eldobja, akkor hogyhogy tudok olvasni róla? vagy cache-ből menne?
mi lehet ennek az oka?
- Tovább (sata gondok (?))
- 1244 megtekintés