Elindult a c7000 Ubuntu-val, FreeBSD-vel

"A doboz, a doboz! Lángol az egész mindenség!!" :))

HP Onboard Administrator - lelke az egésznek

Megvan-e minden?

Insight Display - hogy ne kelljen nagyot hajolni

A blade-ek is megvannak...

Hogy szolgál a kedves egészsége?

És mennyi lesz a villanyszámla?

Ubuntu
--------

cpuinfo:

root@blade1:/home/trey# cat /proc/cpuinfo 
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 23
model name	: Intel(R) Xeon(R) CPU           E5430  @ 2.66GHz
stepping	: 6
cpu MHz		: 2666.762
cache size	: 6144 KB
physical id	: 0
siblings	: 4
core id		: 0
cpu cores	: 4
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush
dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall lm constant_tsc arch_perfmon pebs bts rep_good pni
monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm
bogomips	: 5337.27
clflush size	: 64
cache_alignment	: 64
address sizes	: 38 bits physical, 48 bits virtual
power management:

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 6
model		: 23
model name	: Intel(R) Xeon(R) CPU           E5430  @ 2.66GHz
stepping	: 6
cpu MHz		: 2666.762
cache size	: 6144 KB
physical id	: 1
siblings	: 4
core id		: 0
cpu cores	: 4
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush
dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall lm constant_tsc arch_perfmon pebs bts rep_good pni
monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm
bogomips	: 5333.64
clflush size	: 64
cache_alignment	: 64
address sizes	: 38 bits physical, 48 bits virtual
power management:

processor	: 2
vendor_id	: GenuineIntel
cpu family	: 6
model		: 23
model name	: Intel(R) Xeon(R) CPU           E5430  @ 2.66GHz
stepping	: 6
cpu MHz		: 2666.762
cache size	: 6144 KB
physical id	: 0
siblings	: 4
core id		: 2
cpu cores	: 4
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush
dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall lm constant_tsc arch_perfmon pebs bts rep_good pni
monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm
bogomips	: 5333.63
clflush size	: 64
cache_alignment	: 64
address sizes	: 38 bits physical, 48 bits virtual
power management:

processor	: 3
vendor_id	: GenuineIntel
cpu family	: 6
model		: 23
model name	: Intel(R) Xeon(R) CPU           E5430  @ 2.66GHz
stepping	: 6
cpu MHz		: 2666.762
cache size	: 6144 KB
physical id	: 1
siblings	: 4
core id		: 2
cpu cores	: 4
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush
dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall lm constant_tsc arch_perfmon pebs bts rep_good pni
monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm
bogomips	: 5333.63
clflush size	: 64
cache_alignment	: 64
address sizes	: 38 bits physical, 48 bits virtual
power management:

processor	: 4
vendor_id	: GenuineIntel
cpu family	: 6
model		: 23
model name	: Intel(R) Xeon(R) CPU           E5430  @ 2.66GHz
stepping	: 6
cpu MHz		: 2666.762
cache size	: 6144 KB
physical id	: 0
siblings	: 4
core id		: 1
cpu cores	: 4
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush
dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall lm constant_tsc arch_perfmon pebs bts rep_good pni
monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm
bogomips	: 5333.63
clflush size	: 64
cache_alignment	: 64
address sizes	: 38 bits physical, 48 bits virtual
power management:

processor	: 5
vendor_id	: GenuineIntel
cpu family	: 6
model		: 23
model name	: Intel(R) Xeon(R) CPU           E5430  @ 2.66GHz
stepping	: 6
cpu MHz		: 2666.762
cache size	: 6144 KB
physical id	: 1
siblings	: 4
core id		: 1
cpu cores	: 4
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush
dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall lm constant_tsc arch_perfmon pebs bts rep_good pni
monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm
bogomips	: 5333.63
clflush size	: 64
cache_alignment	: 64
address sizes	: 38 bits physical, 48 bits virtual
power management:

processor	: 6
vendor_id	: GenuineIntel
cpu family	: 6
model		: 23
model name	: Intel(R) Xeon(R) CPU           E5430  @ 2.66GHz
stepping	: 6
cpu MHz		: 2666.762
cache size	: 6144 KB
physical id	: 0
siblings	: 4
core id		: 3
cpu cores	: 4
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush
dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall lm constant_tsc arch_perfmon pebs bts rep_good pni
monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm
bogomips	: 5333.60
clflush size	: 64
cache_alignment	: 64
address sizes	: 38 bits physical, 48 bits virtual
power management:

processor	: 7
vendor_id	: GenuineIntel
cpu family	: 6
model		: 23
model name	: Intel(R) Xeon(R) CPU           E5430  @ 2.66GHz
stepping	: 6
cpu MHz		: 2666.762
cache size	: 6144 KB
physical id	: 1
siblings	: 4
core id		: 3
cpu cores	: 4
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush
dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall lm constant_tsc arch_perfmon pebs bts rep_good pni
monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm
bogomips	: 5333.62
clflush size	: 64
cache_alignment	: 64
address sizes	: 38 bits physical, 48 bits virtual
power management:

free:

root@blade1:/home/trey# free
             total       used       free     shared    buffers     cached
Mem:      12326968     911596   11415372          0      71072     519308
-/+ buffers/cache:     321216   12005752
Swap:      2963952          0    2963952

lspci:

root@blade1:/home/trey# lspci
00:00.0 Host bridge: Intel Corporation 5000P Chipset Memory Controller Hub (rev b1)
00:02.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 2 (rev b1)
00:03.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 (rev b1)
00:04.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 4 (rev b1)
00:05.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 5 (rev b1)
00:06.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 6 (rev b1)
00:07.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 7 (rev b1)
00:10.0 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev b1)
00:10.1 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev b1)
00:10.2 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev b1)
00:11.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved Registers (rev b1)
00:13.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved Registers (rev b1)
00:15.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers (rev b1)
00:16.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers (rev b1)
00:1c.0 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 (rev 09)
00:1d.0 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 (rev 09)
00:1d.1 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 (rev
09)
00:1d.2 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 (rev
09)
00:1d.3 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #4 (rev
09)
00:1d.7 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller (rev 09)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d9)
00:1f.0 ISA bridge: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller (rev 09)
01:03.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
01:04.0 System peripheral: Compaq Computer Corporation Integrated Lights Out Controller (rev 03)
01:04.2 System peripheral: Compaq Computer Corporation Integrated Lights Out  Processor (rev 03)
01:04.4 USB Controller: Hewlett-Packard Company Proliant iLO2 virtual USB controller
01:04.6 IPMI SMIC interface: Hewlett-Packard Company Proliant iLO2 virtual UART
02:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev c3)
03:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708S Gigabit Ethernet (rev 12)
04:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port (rev 01)
04:00.3 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge (rev 01)
05:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 (rev 01)
05:01.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E2 (rev 01)
06:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev c3)
07:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708S Gigabit Ethernet (rev 12)
0a:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev b4)
0b:04.0 PCI bridge: Broadcom BCM5785 [HT1000] PCI/PCI-X Bridge (rev b2)
0b:08.0 RAID bus controller: Hewlett-Packard Company Smart Array E200i (SAS Controller)
10:00.0 Fibre Channel: QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI Express HBA (rev 02)
10:00.1 Fibre Channel: QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI Express HBA (rev 02)

dmesg:

root@blade1:/home/trey# dmesg
[    0.000000] Linux version 2.6.24-16-generic (buildd@yellow) (gcc version 4.2.3 
(Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 12:47:45 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
[    0.000000] Command line: root=UUID=3b74c653-255c-4f49-9309-184bdc61c2a5 ro quiet splash
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[    0.000000]  BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cfe56000 (usable)
[    0.000000]  BIOS-e820: 00000000cfe56000 - 00000000cfe5e000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cfe5e000 - 00000000cfe5f000 (usable)
[    0.000000]  BIOS-e820: 00000000cfe5f000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000032ffff000 (usable)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 851542) 1 entries of 3200 used
[    0.000000] Entering add_active_range(0, 851550, 851551) 2 entries of 3200 used
[    0.000000] Entering add_active_range(0, 1048576, 3342335) 3 entries of 3200 used
[    0.000000] end_pfn_map = 3342335
[    0.000000] DMI 2.4 present.
[    0.000000] ACPI: RSDP signature @ 0xFFFF8100000F4F00 checksum 0
[    0.000000] ACPI: RSDP 000F4F00, 0024 (r2 HP    )
[    0.000000] ACPI: XSDT CFE567C0, 0074 (r1 HP     ProLiant        2   Ò     162E)
[    0.000000] ACPI: FACP CFE56840, 00F4 (r3 HP     ProLiant        2   Ò     162E)
[    0.000000] ACPI: DSDT CFE56940, 2135 (r1 HP         DSDT        1 INTL 20030228)
[    0.000000] ACPI: FACS CFE56100, 0040
[    0.000000] ACPI: SPCR CFE56140, 0050 (r1 HP     SPCRRBSU        1   Ò     162E)
[    0.000000] ACPI: MCFG CFE561C0, 003C (r1 HP     ProLiant        1             0)
[    0.000000] ACPI: HPET CFE56200, 0038 (r1 HP     ProLiant        2   Ò     162E)
[    0.000000] ACPI: SPMI CFE56240, 0040 (r5 HP     ProLiant        1   Ò     162E)
[    0.000000] ACPI: ERST CFE56280, 01D0 (r1 HP     ProLiant        1   Ò     162E)
[    0.000000] ACPI: APIC CFE56480, 0092 (r1 HP     ProLiant        2             0)
[    0.000000] ACPI: FFFF CFE56540, 0176 (r1 HP     ProLiant        1   Ò     162E)
[    0.000000] ACPI: BERT CFE566C0, 0030 (r1 HP     ProLiant        1   Ò     162E)
[    0.000000] ACPI: HEST CFE56700, 00BC (r1 HP     ProLiant        1   Ò     162E)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000032ffff000
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 851542) 1 entries of 3200 used
[    0.000000] Entering add_active_range(0, 851550, 851551) 2 entries of 3200 used
[    0.000000] Entering add_active_range(0, 1048576, 3342335) 3 entries of 3200 used
[    0.000000] Bootmem setup node 0 0000000000000000-000000032ffff000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  3342335
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[4] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   851542
[    0.000000]     0:   851550 ->   851551
[    0.000000]     0:  1048576 ->  3342335
[    0.000000] On node 0 totalpages: 3145205
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1218 pages reserved
[    0.000000]   DMA zone: 2725 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 833167 pages, LIFO batch:31
[    0.000000]   Normal zone: 31359 pages used for memmap
[    0.000000]   Normal zone: 2262400 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x908
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[    0.000000] Processor #4
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] Processor #2
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[    0.000000] Processor #6
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[    0.000000] Processor #5
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] Processor #3
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] Processor #7
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[    0.000000] swsusp: Registered nosave memory region: 00000000cfe56000 - 00000000cfe5e000
[    0.000000] swsusp: Registered nosave memory region: 00000000cfe5f000 - 00000000d0000000
[    0.000000] swsusp: Registered nosave memory region: 00000000d0000000 - 00000000e0000000
[    0.000000] swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f0000000
[    0.000000] swsusp: Registered nosave memory region: 00000000f0000000 - 00000000fec00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fed00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fed00000 - 00000000fee00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee10000
[    0.000000] swsusp: Registered nosave memory region: 00000000fee10000 - 00000000ffc00000
[    0.000000] swsusp: Registered nosave memory region: 00000000ffc00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
[    0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 34656 bytes of per cpu data
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 3098292
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=UUID=3b74c653-255c-4f49-9309-184bdc61c2a5 ro quiet 
splash
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] Extended CMOS year: 2000
[    0.000000] hpet clockevent registered
[    0.000000] TSC calibrated against HPET
[   59.892630] time.c: Detected 2666.762 MHz processor.
[   59.895033] Console: colour VGA+ 80x25
[   59.895036] console [tty0] enabled
[   59.895052] Checking aperture...
[   59.895059] Calgary: detecting Calgary via BIOS EBDA area
[   59.895061] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[   59.895062] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[   59.921094] Placing software IO TLB between 0x1083000 - 0x5083000
[   60.004432] Memory: 12318440k/13369340k available (2466k kernel code, 262380k reserved, 
1309k data, 316k init)
[   60.004459] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=8, Nodes=1
[   60.082130] Calibrating delay using timer specific routine.. 5337.27 BogoMIPS (lpj=10674551)
[   60.082155] Security Framework initialized
[   60.082162] SELinux:  Disabled at boot.
[   60.082173] AppArmor: AppArmor initialized
[   60.082176] Failure registering capabilities with primary security module.
[   60.083245] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[   60.091116] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[   60.094792] Mount-cache hash table entries: 256
[   60.094911] CPU: L1 I cache: 32K, L1 D cache: 32K
[   60.094914] CPU: L2 cache: 6144K
[   60.094916] CPU 0/0 -> Node 0
[   60.094917] using mwait in idle threads.
[   60.094918] CPU: Physical Processor ID: 0
[   60.094919] CPU: Processor Core ID: 0
[   60.094924] CPU0: Thermal monitoring enabled (TM2)
[   60.094935] SMP alternatives: switching to UP code
[   60.095672] Early unpacking initramfs... done
[   60.375800] ACPI: Core revision 20070126
[   60.375831] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   60.417367] Using local APIC timer interrupts.
[   60.454772] APIC timer calibration result 20834073
[   60.454773] Detected 20.834 MHz APIC timer.
[   60.454842] SMP alternatives: switching to SMP code
[   60.455497] Booting processor 1/8 APIC 0x4
[   60.466300] Initializing CPU#1
[   60.542551] Calibrating delay using timer specific routine.. 5333.64 BogoMIPS (lpj=10667282)
[   60.542559] CPU: L1 I cache: 32K, L1 D cache: 32K
[   60.542560] CPU: L2 cache: 6144K
[   60.542562] CPU 1/4 -> Node 0
[   60.542563] CPU: Physical Processor ID: 1
[   60.542564] CPU: Processor Core ID: 0
[   60.542571] CPU1: Thermal monitoring enabled (TM2)
[   60.543495] Intel(R) Xeon(R) CPU           E5430  @ 2.66GHz stepping 06
[   60.543596] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[   60.563597] SMP alternatives: switching to SMP code
[   60.563998] Booting processor 2/8 APIC 0x2
[   60.574800] Initializing CPU#2
[   60.654263] Calibrating delay using timer specific routine.. 5333.63 BogoMIPS (lpj=10667264)
[   60.654271] CPU: L1 I cache: 32K, L1 D cache: 32K
[   60.654272] CPU: L2 cache: 6144K
[   60.654274] CPU 2/2 -> Node 0
[   60.654276] CPU: Physical Processor ID: 0
[   60.654277] CPU: Processor Core ID: 2
[   60.654283] CPU2: Thermal monitoring enabled (TM2)
[   60.655206] Intel(R) Xeon(R) CPU           E5430  @ 2.66GHz stepping 06
[   60.655282] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[   60.675287] SMP alternatives: switching to SMP code
[   60.675689] Booting processor 3/8 APIC 0x6
[   60.686493] Initializing CPU#3
[   60.765975] Calibrating delay using timer specific routine.. 5333.63 BogoMIPS (lpj=10667274)
[   60.765983] CPU: L1 I cache: 32K, L1 D cache: 32K
[   60.765984] CPU: L2 cache: 6144K
[   60.765986] CPU 3/6 -> Node 0
[   60.765988] CPU: Physical Processor ID: 1
[   60.765989] CPU: Processor Core ID: 2
[   60.765995] CPU3: Thermal monitoring enabled (TM2)
[   60.766919] Intel(R) Xeon(R) CPU           E5430  @ 2.66GHz stepping 06
[   60.766957] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[   60.786962] SMP alternatives: switching to SMP code
[   60.787363] Booting processor 4/8 APIC 0x1
[   60.797972] Initializing CPU#4
[   60.877687] Calibrating delay using timer specific routine.. 5333.63 BogoMIPS (lpj=10667260)
[   60.877693] CPU: L1 I cache: 32K, L1 D cache: 32K
[   60.877694] CPU: L2 cache: 6144K
[   60.877696] CPU 4/1 -> Node 0
[   60.877697] CPU: Physical Processor ID: 0
[   60.877698] CPU: Processor Core ID: 1
[   60.877703] CPU4: Thermal monitoring enabled (TM2)
[   60.878415] Intel(R) Xeon(R) CPU           E5430  @ 2.66GHz stepping 06
[   60.878475] checking TSC synchronization [CPU#0 -> CPU#4]: passed.
[   60.898513] SMP alternatives: switching to SMP code
[   60.899192] Booting processor 5/8 APIC 0x5
[   60.909995] Initializing CPU#5
[   60.989399] Calibrating delay using timer specific routine.. 5333.63 BogoMIPS (lpj=10667272)
[   60.989406] CPU: L1 I cache: 32K, L1 D cache: 32K
[   60.989408] CPU: L2 cache: 6144K
[   60.989410] CPU 5/5 -> Node 0
[   60.989411] CPU: Physical Processor ID: 1
[   60.989412] CPU: Processor Core ID: 1
[   60.989419] CPU5: Thermal monitoring enabled (TM2)
[   60.990343] Intel(R) Xeon(R) CPU           E5430  @ 2.66GHz stepping 06
[   60.990360] checking TSC synchronization [CPU#0 -> CPU#5]: passed.
[   61.010362] SMP alternatives: switching to SMP code
[   61.010764] Booting processor 6/8 APIC 0x3
[   61.021566] Initializing CPU#6
[   61.101111] Calibrating delay using timer specific routine.. 5333.60 BogoMIPS (lpj=10667216)
[   61.101118] CPU: L1 I cache: 32K, L1 D cache: 32K
[   61.101119] CPU: L2 cache: 6144K
[   61.101122] CPU 6/3 -> Node 0
[   61.101123] CPU: Physical Processor ID: 0
[   61.101124] CPU: Processor Core ID: 3
[   61.101130] CPU6: Thermal monitoring enabled (TM2)
[   61.102054] Intel(R) Xeon(R) CPU           E5430  @ 2.66GHz stepping 06
[   61.102132] checking TSC synchronization [CPU#0 -> CPU#6]: passed.
[   61.122138] SMP alternatives: switching to SMP code
[   61.122539] Booting processor 7/8 APIC 0x7
[   61.133343] Initializing CPU#7
[   61.212823] Calibrating delay using timer specific routine.. 5333.62 BogoMIPS (lpj=10667253)
[   61.212830] CPU: L1 I cache: 32K, L1 D cache: 32K
[   61.212831] CPU: L2 cache: 6144K
[   61.212834] CPU 7/7 -> Node 0
[   61.212835] CPU: Physical Processor ID: 1
[   61.212836] CPU: Processor Core ID: 3
[   61.212842] CPU7: Thermal monitoring enabled (TM2)
[   61.213766] Intel(R) Xeon(R) CPU           E5430  @ 2.66GHz stepping 06
[   61.213855] checking TSC synchronization [CPU#0 -> CPU#7]: passed.
[   61.233819] Brought up 8 CPUs
[   61.233925] CPU0 attaching sched-domain:
[   61.233927]  domain 0: span 11
[   61.233928]   groups: 01 10
[   61.233930]   domain 1: span ff
[   61.233931]    groups: 11 22 44 88
[   61.233933]    domain 2: span ff
[   61.233934]     groups: ff
[   61.233935] CPU1 attaching sched-domain:
[   61.233936]  domain 0: span 22
[   61.233937]   groups: 02 20
[   61.233938]   domain 1: span ff
[   61.233939]    groups: 22 44 88 11
[   61.233941]    domain 2: span ff
[   61.233942]     groups: ff
[   61.233943] CPU2 attaching sched-domain:
[   61.233944]  domain 0: span 44
[   61.233945]   groups: 04 40
[   61.233946]   domain 1: span ff
[   61.233947]    groups: 44 88 11 22
[   61.233949]    domain 2: span ff
[   61.233950]     groups: ff
[   61.233951] CPU3 attaching sched-domain:
[   61.233952]  domain 0: span 88
[   61.233953]   groups: 08 80
[   61.233954]   domain 1: span ff
[   61.233955]    groups: 88 11 22 44
[   61.233957]    domain 2: span ff
[   61.233958]     groups: ff
[   61.233959] CPU4 attaching sched-domain:
[   61.233960]  domain 0: span 11
[   61.233961]   groups: 10 01
[   61.233963]   domain 1: span ff
[   61.233964]    groups: 11 22 44 88
[   61.233965]    domain 2: span ff
[   61.233966]     groups: ff
[   61.233968] CPU5 attaching sched-domain:
[   61.233968]  domain 0: span 22
[   61.233969]   groups: 20 02
[   61.233971]   domain 1: span ff
[   61.233972]    groups: 22 44 88 11
[   61.233974]    domain 2: span ff
[   61.233975]     groups: ff
[   61.233976] CPU6 attaching sched-domain:
[   61.233977]  domain 0: span 44
[   61.233978]   groups: 40 04
[   61.233979]   domain 1: span ff
[   61.233980]    groups: 44 88 11 22
[   61.233982]    domain 2: span ff
[   61.233983]     groups: ff
[   61.233984] CPU7 attaching sched-domain:
[   61.233985]  domain 0: span 88
[   61.233986]   groups: 80 08
[   61.233987]   domain 1: span ff
[   61.233988]    groups: 88 11 22 44
[   61.233990]    domain 2: span ff
[   61.233991]     groups: ff
[   61.234355] net_namespace: 120 bytes
[   61.234633] Time: 20:51:58  Date: 02/29/08
[   61.234656] NET: Registered protocol family 16
[   61.234799] ACPI: bus type pci registered
[   61.234854] PCI: Using configuration type 1
[   61.235650] ACPI: EC: Look up EC in DSDT
[   61.236541] ACPI: Interpreter enabled
[   61.236543] ACPI: (supports S0 S4 S5)
[   61.236550] ACPI: Using IOAPIC for interrupt routing
[   61.238716] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   61.254176] PCI: Transparent bridge - 0000:00:1e.0
[   61.254206] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   61.254300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
[   61.254363] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPTA.NPE1._PRT]
[   61.254408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02._PRT]
[   61.254445] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4._PRT]
[   61.254499] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4.IPE1.NPE2._PRT]
[   61.254544] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT03._PRT]
[   61.254611] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT04._PRT]
[   61.254687] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT05._PRT]
[   61.254763] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT06._PRT]
[   61.254841] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT07._PRT]
[   61.256898] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11)
[   61.256947] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11)
[   61.256994] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11)
[   61.257038] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
[   61.257081] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled.
[   61.257125] ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11)
[   61.257168] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11)
[   61.257211] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11)
[   61.257292] Linux Plug and Play Support v0.97 (c) Adam Belay
[   61.257313] pnp: PnP ACPI init
[   61.257317] ACPI: bus type pnp registered
[   61.258218] pnp: PnP ACPI: found 11 devices
[   61.258219] ACPI: ACPI bus type pnp unregistered
[   61.258377] PCI: Using ACPI for IRQ routing
[   61.258379] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   61.268760] NET: Registered protocol family 8
[   61.268762] NET: Registered protocol family 20
[   61.268797] PCI-GART: No AMD northbridge found.
[   61.268800] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   61.268802] hpet0: 3 64-bit timers, 14318180 Hz
[   61.269827] AppArmor: AppArmor Filesystem Enabled
[   61.272671] Time: tsc clocksource has been installed.
[   61.272678] Switched to high resolution mode on CPU 0
[   61.273478] Switched to high resolution mode on CPU 4
[   61.273656] Switched to high resolution mode on CPU 5
[   61.273675] Switched to high resolution mode on CPU 3
[   61.273715] Switched to high resolution mode on CPU 6
[   61.273717] Switched to high resolution mode on CPU 2
[   61.273724] Switched to high resolution mode on CPU 7
[   61.273735] Switched to high resolution mode on CPU 1
[   61.280612] system 00:01: ioport range 0x408-0x40f has been reserved
[   61.280615] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[   61.280617] system 00:01: ioport range 0x700-0x71f has been reserved
[   61.280619] system 00:01: ioport range 0x800-0x83f has been reserved
[   61.280621] system 00:01: ioport range 0x900-0x97f has been reserved
[   61.280623] system 00:01: ioport range 0xc80-0xc83 has been reserved
[   61.280625] system 00:01: ioport range 0xcd4-0xcd7 has been reserved
[   61.280627] system 00:01: ioport range 0xf50-0xf58 has been reserved
[   61.280629] system 00:01: ioport range 0xca0-0xca1 has been reserved
[   61.280631] system 00:01: ioport range 0xca4-0xca5 has been reserved
[   61.280633] system 00:01: ioport range 0x3f8-0x3ff has been reserved
[   61.280635] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[   61.280637] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
[   61.281161] PCI: Bridge: 0000:06:00.0
[   61.281162]   IO window: disabled.
[   61.281278]   MEM window: fa000000-fbffffff
[   61.281369]   PREFETCH window: d1000000-d10fffff
[   61.281506] PCI: Bridge: 0000:05:00.0
[   61.281507]   IO window: disabled.
[   61.281597]   MEM window: fa000000-fbffffff
[   61.281643]   PREFETCH window: d1000000-d10fffff
[   61.281734] PCI: Bridge: 0000:05:01.0
[   61.281735]   IO window: disabled.
[   61.281825]   MEM window: disabled.
[   61.281872]   PREFETCH window: disabled.
[   61.281962] PCI: Bridge: 0000:04:00.0
[   61.281963]   IO window: disabled.
[   61.282054]   MEM window: fa000000-fbffffff
[   61.282100]   PREFETCH window: d1000000-d10fffff
[   61.282191] PCI: Bridge: 0000:04:00.3
[   61.282191]   IO window: disabled.
[   61.282282]   MEM window: disabled.
[   61.282328]   PREFETCH window: disabled.
[   61.282419] PCI: Bridge: 0000:00:02.0
[   61.282420]   IO window: disabled.
[   61.282422]   MEM window: f9f00000-fbffffff
[   61.282424]   PREFETCH window: d1000000-d10fffff
[   61.282427] PCI: Bridge: 0000:0b:04.0
[   61.282428]   IO window: disabled.
[   61.282431]   MEM window: disabled.
[   61.282433]   PREFETCH window: disabled.
[   61.282436] PCI: Bridge: 0000:0a:00.0
[   61.282438]   IO window: 4000-4fff
[   61.282441]   MEM window: fde00000-fdefffff
[   61.282444]   PREFETCH window: d1100000-d11fffff
[   61.282447] PCI: Bridge: 0000:00:03.0
[   61.282448]   IO window: 4000-4fff
[   61.282450]   MEM window: fde00000-fdefffff
[   61.282452]   PREFETCH window: d1100000-d11fffff
[   61.282455] PCI: Bridge: 0000:00:04.0
[   61.282455]   IO window: disabled.
[   61.282457]   MEM window: disabled.
[   61.282459]   PREFETCH window: disabled.
[   61.282462] PCI: Bridge: 0000:00:05.0
[   61.282463]   IO window: 5000-5fff
[   61.282465]   MEM window: fdf00000-fdffffff
[   61.282467]   PREFETCH window: d1200000-d12fffff
[   61.282469] PCI: Bridge: 0000:00:06.0
[   61.282470]   IO window: disabled.
[   61.282472]   MEM window: disabled.
[   61.282474]   PREFETCH window: disabled.
[   61.282476] PCI: Bridge: 0000:00:07.0
[   61.282477]   IO window: disabled.
[   61.282479]   MEM window: disabled.
[   61.282481]   PREFETCH window: disabled.
[   61.282483] PCI: Bridge: 0000:02:00.0
[   61.282484]   IO window: disabled.
[   61.282488]   MEM window: f6000000-f7ffffff
[   61.282491]   PREFETCH window: d1300000-d13fffff
[   61.282496] PCI: Bridge: 0000:00:1c.0
[   61.282496]   IO window: disabled.
[   61.282499]   MEM window: f6000000-f7ffffff
[   61.282502]   PREFETCH window: d1300000-d13fffff
[   61.282506] PCI: Bridge: 0000:00:1e.0
[   61.282508]   IO window: 2000-3fff
[   61.282511]   MEM window: f5e00000-f5ffffff
[   61.282513]   PREFETCH window: d8000000-dfffffff
[   61.282524] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   61.282831] PCI: Setting latency timer of device 0000:04:00.0 to 64
[   61.283154] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   61.283197] PCI: Setting latency timer of device 0000:05:00.0 to 64
[   61.283790] PCI: Setting latency timer of device 0000:06:00.0 to 64
[   61.284110] ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 17 (level, low) -> IRQ 17
[   61.284156] PCI: Setting latency timer of device 0000:05:01.0 to 64
[   61.284475] PCI: Setting latency timer of device 0000:04:00.3 to 64
[   61.284525] PCI: Setting latency timer of device 0000:00:03.0 to 64
[   61.284537] PCI: Setting latency timer of device 0000:0a:00.0 to 64
[   61.284550] PCI: Setting latency timer of device 0000:00:04.0 to 64
[   61.284557] PCI: Setting latency timer of device 0000:00:05.0 to 64
[   61.284563] PCI: Setting latency timer of device 0000:00:06.0 to 64
[   61.284573] PCI: Setting latency timer of device 0000:00:07.0 to 64
[   61.284586] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[   61.284589] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   61.284606] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   61.284614] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   61.284621] NET: Registered protocol family 2
[   61.324802] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[   61.326530] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[   61.329994] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   61.330452] TCP: Hash tables configured (established 524288 bind 65536)
[   61.330453] TCP reno registered
[   61.340616] checking if image is initramfs... it is
[   61.922243] Freeing initrd memory: 8208k freed
[   61.927578] audit: initializing netlink socket (disabled)
[   61.927595] audit(1204318317.900:1): initialized
[   61.930533] VFS: Disk quotas dquot_6.5.1
[   61.930600] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   61.930723] io scheduler noop registered
[   61.930725] io scheduler anticipatory registered
[   61.930726] io scheduler deadline registered
[   61.930833] io scheduler cfq registered (default)
[   61.948533] Boot video device is 0000:01:03.0
[   61.950112] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   61.950136] assign_interrupt_mode Found MSI capability
[   61.950163] Allocate Port Service[0000:00:02.0:pcie00]
[   61.950239] PCI: Setting latency timer of device 0000:00:03.0 to 64
[   61.950263] assign_interrupt_mode Found MSI capability
[   61.950282] Allocate Port Service[0000:00:03.0:pcie00]
[   61.950352] PCI: Setting latency timer of device 0000:00:04.0 to 64
[   61.950376] assign_interrupt_mode Found MSI capability
[   61.950395] Allocate Port Service[0000:00:04.0:pcie00]
[   61.950480] PCI: Setting latency timer of device 0000:00:05.0 to 64
[   61.950504] assign_interrupt_mode Found MSI capability
[   61.950523] Allocate Port Service[0000:00:05.0:pcie00]
[   61.950593] PCI: Setting latency timer of device 0000:00:06.0 to 64
[   61.950617] assign_interrupt_mode Found MSI capability
[   61.950637] Allocate Port Service[0000:00:06.0:pcie00]
[   61.950712] PCI: Setting latency timer of device 0000:00:07.0 to 64
[   61.950736] assign_interrupt_mode Found MSI capability
[   61.950755] Allocate Port Service[0000:00:07.0:pcie00]
[   61.950826] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   61.950859] assign_interrupt_mode Found MSI capability
[   61.950886] Allocate Port Service[0000:00:1c.0:pcie00]
[   61.951203] PCI: Setting latency timer of device 0000:04:00.0 to 64
[   61.952757] Allocate Port Service[0000:04:00.0:pcie10]
[   61.954767] PCI: Setting latency timer of device 0000:05:00.0 to 64
[   61.956365] assign_interrupt_mode Found MSI capability
[   61.957736] Allocate Port Service[0000:05:00.0:pcie20]
[   61.959746] PCI: Setting latency timer of device 0000:05:01.0 to 64
[   61.961344] assign_interrupt_mode Found MSI capability
[   61.962715] Allocate Port Service[0000:05:01.0:pcie20]
[   61.991353] Real Time Clock Driver v1.12ac
[   61.991507] hpet_resources: 0xfed00000 is busy
[   61.991530] Linux agpgart interface v0.102
[   61.991532] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   61.991636] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   61.991756] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   61.992217] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   61.993038] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   61.993102] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   61.993195] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[   61.994702] serio: i8042 KBD port at 0x60,0x64 irq 1
[   61.994711] serio: i8042 AUX port at 0x60,0x64 irq 12
[   62.008268] mice: PS/2 mouse device common for all mice
[   62.008314] cpuidle: using governor ladder
[   62.008316] cpuidle: using governor menu
[   62.008475] NET: Registered protocol family 1
[   62.008542] registered taskstats version 1
[   62.008707]   Magic number: 12:615:903
[   62.008841] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   62.008844] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   62.008845] EDD information not available.
[   62.008857] Freeing unused kernel memory: 316k freed
[   63.195709] fuse init (API version 7.9)
[   63.213066] ACPI: Thermal Zone [THM0] (8 C)
[   63.339584] SCSI subsystem initialized
[   63.347435] HP CISS Driver (v 3.6.14)
[   63.347519] ACPI: PCI Interrupt 0000:0b:08.0[A] -> GSI 18 (level, low) -> IRQ 18
[   63.352350] usbcore: registered new interface driver usbfs
[   63.352432] usbcore: registered new interface driver hub
[   63.353177] usbcore: registered new device driver usb
[   63.353351] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.6.9 (December 8, 2007)
[   63.353729] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   63.359023] eth0: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found 
at mem fa000000, IRQ 16, node addr 00:1f:29:c4:3f:4a
[   63.359269] USB Universal Host Controller Interface driver v3.0
[   63.367690] QLogic Fibre Channel HBA Driver
[   63.388259] Floppy drive(s): fd0 is 1.44M
[   63.388585] cciss0: <0x3238> at PCI 0000:0b:08.0 IRQ 502 using DAC
[   63.400568]       blocks= 143305920 block_size= 512
[   63.404519]       heads=255, sectors=32, cylinders=17562
[   63.404520] 
[   63.404711]       blocks= 143305920 block_size= 512
[   63.404828]       heads=255, sectors=32, cylinders=17562
[   63.404829] 
[   63.404833]  cciss/c0d0: p1 p2 < p5 >
[   63.418624] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   63.420923] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[   63.420935] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   63.420938] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   63.421213] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   63.421243] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001000
[   63.421375] usb usb1: configuration #1 chosen from 1 choice
[   63.421396] hub 1-0:1.0: USB hub found
[   63.421402] hub 1-0:1.0: 2 ports detected
[   63.421942] eth1: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at 
mem f6000000, IRQ 16, node addr 00:1f:29:c4:3f:48
[   63.526778] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
[   63.526786] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   63.526789] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   63.526812] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   63.526839] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001020
[   63.526927] usb usb2: configuration #1 chosen from 1 choice
[   63.526947] hub 2-0:1.0: USB hub found
[   63.526952] hub 2-0:1.0: 2 ports detected
[   63.630465] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[   63.630470] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   63.630473] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   63.630487] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   63.630508] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001040
[   63.630574] usb usb3: configuration #1 chosen from 1 choice
[   63.630588] hub 3-0:1.0: USB hub found
[   63.630592] hub 3-0:1.0: 2 ports detected
[   63.734203] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
[   63.734208] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   63.734210] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   63.734225] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[   63.734248] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001060
[   63.734315] usb usb4: configuration #1 chosen from 1 choice
[   63.734331] hub 4-0:1.0: USB hub found
[   63.734336] hub 4-0:1.0: 2 ports detected
[   63.821483] Attempting manual resume
[   63.821487] swsusp: Resume From Partition 104:5
[   63.821488] PM: Checking swsusp image.
[   63.821652] PM: Resume from disk failed.
[   63.830743] kjournald starting.  Commit interval 5 seconds
[   63.830755] EXT3-fs: mounted filesystem with ordered data mode.
[   63.837942] ACPI: PCI Interrupt 0000:01:04.4[B] -> GSI 22 (level, low) -> IRQ 22
[   63.837949] uhci_hcd 0000:01:04.4: UHCI Host Controller
[   63.837965] uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 5
[   63.837975] uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
[   63.838900] uhci_hcd 0000:01:04.4: irq 22, io base 0x00003800
[   63.839177] usb usb5: configuration #1 chosen from 1 choice
[   63.839193] hub 5-0:1.0: USB hub found
[   63.839197] hub 5-0:1.0: 2 ports detected
[   63.941672] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[   63.941774] qla2xxx 0000:10:00.0: Found an ISP2432, irq 18, iobase 0xffffc2000254e000
[   63.941890] qla2xxx 0000:10:00.0: Configuring PCI space...
[   63.941893] PCI: Setting latency timer of device 0000:10:00.0 to 64
[   63.945259] qla2xxx 0000:10:00.0: Configure NVRAM parameters...
[   63.981056] qla2xxx 0000:10:00.0: Verifying loaded RISC code...
[   64.081243] usb 4-2: new full speed USB device using uhci_hcd and address 2
[   64.245058] usb 4-2: configuration #1 chosen from 1 choice
[   64.488170] usb 5-1: new full speed USB device using uhci_hcd and address 2
[   64.635574] usb 5-1: configuration #1 chosen from 1 choice
[   64.887120] usb 5-2: new full speed USB device using uhci_hcd and address 3
[   65.034137] usb 5-2: configuration #1 chosen from 1 choice
[   65.036260] hub 5-2:1.0: USB hub found
[   65.038539] hub 5-2:1.0: 7 ports detected
[   66.395162] floppy0: no floppy controllers found
[   67.289890] EDAC MC: Ver: 2.1.0 Apr 10 2008
[   67.330279] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   67.392314] input: Power Button (FF) as /devices/virtual/input/input1
[   67.417996] ACPI: Power Button (FF) [PWRF]
[   67.485303] qla2xxx 0000:10:00.0: Allocated (64 KB) for EFT...
[   67.485416] qla2xxx 0000:10:00.0: Allocated (1413 KB) for firmware dump...
[   67.497176] Floppy drive(s): fd0 is 1.44M
[   67.515476] iTCO_vendor_support: vendor-support=0
[   67.516497] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[   67.516554] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[   67.516578] iTCO_wdt: No card detected
[   67.523766] scsi0 : qla2xxx
[   67.525767] qla2xxx 0000:10:00.0: 
[   67.525767]  QLogic Fibre Channel HBA Driver: 8.02.00-k5
[   67.525768]   QLogic QMH2462 - 
[   67.525769]   ISP2432: PCIe (2.5Gb/s x4) @ 0000:10:00.0 hdma+, host#=0, fw=4.00.27 [IP] 
[   67.525795] ACPI: PCI Interrupt 0000:10:00.1[B] -> GSI 19 (level, low) -> IRQ 19
[   67.526686] qla2xxx 0000:10:00.1: Found an ISP2432, irq 19, iobase 0xffffc20002544000
[   67.526688] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   67.526819] qla2xxx 0000:10:00.1: Configuring PCI space...
[   67.526824] PCI: Setting latency timer of device 0000:10:00.1 to 64
[   67.530322] qla2xxx 0000:10:00.1: Configure NVRAM parameters...
[   67.541978] intel_rng: FWH not detected
[   67.568751] qla2xxx 0000:10:00.1: Verifying loaded RISC code...
[   67.572856] ipmi message handler version 39.1
[   67.579834] IPMI System Interface driver.
[   67.579837] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave 
address 0x20, irq 0
[   67.595301] usbcore: registered new interface driver libusual
[   67.605748] Initializing USB Mass Storage driver...
[   67.605817] scsi2 : SCSI emulation for USB Mass Storage devices
[   67.605875] usbcore: registered new interface driver usb-storage
[   67.605877] USB Mass Storage support registered.
[   67.605974] usb-storage: device found at 2
[   67.605976] usb-storage: waiting for device to settle before scanning
[   67.631797] usbcore: registered new interface driver hiddev
[   67.636169] input: HP Virtual Keyboard as 
/devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb5/5-1/5-1:1.0/input/input3
[   67.671951] ipmi: Found new BMC (man_id: 0x00000b,  prod_id: 0x0000, dev_id: 0x11)
[   67.671957] IPMI kcs interface initialized
[   67.671961] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave 
address 0x0, irq 0
[   67.671963] ipmi_si: duplicate interface
[   67.812441] qla2xxx 0000:10:00.1: Allocated (64 KB) for EFT...
[   67.812565] qla2xxx 0000:10:00.1: Allocated (1413 KB) for firmware dump...
[   67.844439] scsi1 : qla2xxx
[   67.844594] qla2xxx 0000:10:00.1: 
[   67.844595]  QLogic Fibre Channel HBA Driver: 8.02.00-k5
[   67.844596]   QLogic QMH2462 - 
[   67.844596]   ISP2432: PCIe (2.5Gb/s x4) @ 0000:10:00.1 hdma+, host#=1, fw=4.00.27 [IP] 
[   67.844695] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16
[   67.846990] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   67.846997] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   67.847055] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6
[   67.850955] ehci_hcd 0000:00:1d.7: debug port 1
[   67.850960] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   67.850967] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xf5df0000
[   67.864280] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   67.864385] usb usb6: configuration #1 chosen from 1 choice
[   67.864411] hub 6-0:1.0: USB hub found
[   67.864418] hub 6-0:1.0: 8 ports detected
[   67.968749] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   67.969357] EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0
[   67.969382] EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': 
DEV '0000:00:10.0' (POLLED)
[   67.969451] ACPI: PCI Interrupt 0000:01:04.6[A] -> GSI 21 (level, low) -> IRQ 21
[   67.969456] ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf5ef0000, slave 
address 0x0, irq 21
[   68.024680] input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1
[   68.029402] input: HP Virtual Keyboard as 
/devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb5/5-1/5-1:1.1/input/input4
[   68.051799]   Using irq 21
[   68.074100] input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1
[   68.207886] usb 6-8: new high speed USB device using ehci_hcd and address 2
[   68.237838] ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
[   68.237854] IPMI kcs interface initialized
[   68.342968] usb 6-8: configuration #1 chosen from 1 choice
[   68.344349] scsi3 : SCSI emulation for USB Mass Storage devices
[   68.344410] usb-storage: device found at 2
[   68.344413] usb-storage: waiting for device to settle before scanning
[   68.344501] usb 4-2: USB disconnect, address 2
[   68.344503] usbcore: registered new interface driver usbhid
[   68.344527] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   69.136710] qla2xxx 0000:10:00.0: LOOP UP detected (4 Gbps).
[   69.435848] qla2xxx 0000:10:00.1: LOOP UP detected (4 Gbps).
[   70.504347] floppy0: no floppy controllers found
[   71.087926] lp: driver loaded but no devices found
[   71.141406] Adding 2963952k swap on /dev/cciss/c0d0p5.  Priority:-1 extents:1 across:2963952k
[   71.756924] EXT3 FS on cciss/c0d0p1, internal journal
[   72.850843] ip_tables: (C) 2000-2006 Netfilter Core Team
[   73.094624] No dock devices found.
[   73.329793] usb-storage: device scan complete
[   73.330438] scsi 3:0:0:0: CD-ROM            FREECOM_ DVD+/-RW16B9     2.46 PQ: 0 ANSI: 0
[   73.342968] Driver 'sr' needs updating - please use bus_type methods
[   73.349124] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[   73.349126] Uniform CD-ROM driver Revision: 3.20
[   73.349163] sr 3:0:0:0: Attached scsi CD-ROM sr0
[   73.360266] sr 3:0:0:0: Attached scsi generic sg0 type 5
[   73.835625] ppdev: user-space parallel port driver
[   73.883189] audit(1204318330.875:2): type=1503 operation="inode_permission" 
requested_mask="a::" denied_mask="a::" name="/dev/tty" 
pid=5495 profile="/usr/sbin/cupsd" namespace="default"
[   74.636625] Bluetooth: Core ver 2.11
[   74.636742] NET: Registered protocol family 31
[   74.636743] Bluetooth: HCI device and connection manager initialized
[   74.636748] Bluetooth: HCI socket layer initialized
[   74.644312] Bluetooth: L2CAP ver 2.9
[   74.644315] Bluetooth: L2CAP socket layer initialized
[   74.682954] Bluetooth: RFCOMM socket layer initialized
[   74.682970] Bluetooth: RFCOMM TTY layer initialized
[   74.682972] Bluetooth: RFCOMM ver 1.8
[   76.189476] bnx2: Chip reset did not complete
[   78.309533] bnx2: eth0: using MSI
[   78.331061] bnx2: eth0 NIC SerDes Link is Up, 1000 Mbps full duplex, receive &
 transmit flow control ON
[   78.636317] bnx2: eth0 NIC SerDes Link is Down
[   78.666610] bnx2: eth0 NIC SerDes Link is Up, 1000 Mbps full duplex, receive & 
transmit flow control ON
[   80.444806] NET: Registered protocol family 17
[  121.204372] NET: Registered protocol family 10
[  121.204590] lo: Disabled Privacy Extensions
[  132.002444] eth0: no IPv6 routers present
[ 1737.366679] usb 6-8: USB disconnect, address 2
[ 7148.891156]  rport-0:0-0: blocked FC remote port time out: removing rport
[ 7149.210306]  rport-1:0-0: blocked FC remote port time out: removing rport

FreeBSD
----------

dmesg:

Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Sun Feb 24 10:35:36 UTC 2008
    root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU           E5430  @ 2.66GHz (2666.78-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x10676  Stepping = 6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,
DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xce3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,<b19>>
  AMD Features=0x20000800<SYSCALL,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 4
usable memory = 12870365184 (12274 MB)
avail memory  = 12457086976 (11880 MB)
ACPI APIC Table: <HP     ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
 cpu4 (AP): APIC ID:  4
 cpu5 (AP): APIC ID:  5
 cpu6 (AP): APIC ID:  6
 cpu7 (AP): APIC ID:  7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 10:34:18)
acpi0: <HP ProLiant> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 820082006000820
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 820082006000820
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 820082006000820
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 820082006000820
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
cpu4: <ACPI CPU> on acpi0
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 820082006000820
device_attach: est4 attach returned 6
p4tcc4: <CPU Frequency Thermal Control> on cpu4
cpu5: <ACPI CPU> on acpi0
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 820082006000820
device_attach: est5 attach returned 6
p4tcc5: <CPU Frequency Thermal Control> on cpu5
cpu6: <ACPI CPU> on acpi0
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 820082006000820
device_attach: est6 attach returned 6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
cpu7: <ACPI CPU> on acpi0
est7: <Enhanced SpeedStep Frequency Control> on cpu7
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 820082006000820
device_attach: est7 attach returned 6
p4tcc7: <CPU Frequency Thermal Control> on cpu7
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci4: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci4
pci5: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci5
pci6: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci6
pci7: <ACPI PCI bus> on pcib4
bce0: <Broadcom NetXtreme II BCM5708 1000Base-SX (B2)> mem 0xfa000000-0xfbffffff irq 16 at 
device 0.0 on pci7
miibus0: <MII bus> on bce0
brgphy0: <BCM5708S 1000/2500BaseSX PHY> PHY 2 on miibus0
brgphy0:  1000baseSX-FDX, auto
bce0: Ethernet address: 00:1f:29:c4:56:4a
bce0: [ITHREAD]
bce0: ASIC (0x57081021); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W (0x01090605); Flags( MSI )
pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci5
pci8: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.3 on pci4
pci9: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci10: <ACPI PCI bus> on pcib7
pcib8: <PCI-PCI bridge> at device 0.0 on pci10
pci11: <PCI bus> on pcib8
pcib9: <PCI-PCI bridge> at device 4.0 on pci11
pci12: <PCI bus> on pcib9
ciss0: <HP Smart Array E200i> port 0x4000-0x40ff mem 
0xfde80000-0xfdefffff,0xfde70000-0xfde77fff irq 18 at device 8.0 on pci11
ciss0: [ITHREAD]
pcib10: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci13: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci16: <ACPI PCI bus> on pcib11
isp0: <Qlogic ISP 2432 PCI FC-AL Adapter> port 0x5000-0x50ff mem 
0xfdff0000-0xfdff3fff irq 18 at device 0.0 on pci16
firmware_get: failed to load firmware image isp_2400
isp0: [ITHREAD]
isp0: Polled Mailbox Command (0x8) Timeout (100000us)
isp0: Polled Mailbox Command (0x8) Timeout (100000us)
isp0: Mailbox Command 'ABOUT FIRMWARE' failed (TIMEOUT)
device_attach: isp0 attach returned 6
isp1: <Qlogic ISP 2432 PCI FC-AL Adapter> port 0x5400-0x54ff mem 0xfdfe0000-0xfdfe3fff 
irq 19 at 
device 0.1 on pci16
firmware_get: failed to load firmware image isp_2400
isp1: [ITHREAD]
isp1: Polled Mailbox Command (0x8) Timeout (100000us)
isp1: Polled Mailbox Command (0x8) Timeout (100000us)
isp1: Mailbox Command 'ABOUT FIRMWARE' failed (TIMEOUT)
device_attach: isp1 attach returned 6
pcib12: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci19: <ACPI PCI bus> on pcib12
pcib13: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci22: <ACPI PCI bus> on pcib13
pcib14: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib14
pcib15: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib15
bce1: <Broadcom NetXtreme II BCM5708 1000Base-SX (B2)> mem 0xf6000000-0xf7ffffff irq 
16 at device 0.0 on pci3
miibus1: <MII bus> on bce1
brgphy1: <BCM5708S 1000/2500BaseSX PHY> PHY 2 on miibus1
brgphy1:  1000baseSX-FDX, auto
bce1: Ethernet address: 00:1f:29:c4:56:46
bce1: [ITHREAD]
bce1: ASIC (0x57081021); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W (0x01090605); Flags( MSI )
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x1000-0x101f irq 16 at 
device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x1020-0x103f irq 17 at 
device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x1040-0x105f irq 18 at 
device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0x1060-0x107f irq 19 at 
device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <Intel 631XESB/632XESB/3100 USB controller USB-4> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xf5df0000-0xf5df03ff irq 16 at device 
29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: waiting for BIOS to give up control
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 63XXESB USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
umass0: <Freecom FX-5, class 0/0, rev 2.00/2.00, addr 2> on uhub4
pcib16: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib16
vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 
0xd8000000-0xdfffffff,0xf5ff0000-0xf5ffffff irq 23 at device 3.0 on pci1
pci1: <base peripheral> at device 4.0 (no driver attached)
pci1: <base peripheral> at device 4.2 (no driver attached)
uhci4: <UHCI (generic) USB controller> port 0x3800-0x381f irq 22 at device 4.4 on pci1
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <(0x103c) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
pci1: <serial bus> at device 4.6 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <Standard PC COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f3 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f3 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xe6000-0xe7fff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd0: <HP Virtual Keyboard, class 0/0, rev 1.10/0.02, addr 2> on uhub5
kbd2 at ukbd0
ums0: <HP Virtual Keyboard, class 0/0, rev 1.10/0.02, addr 2> on uhub5
ums0: 3 buttons.
uhub6: <HP Virtual Hub, class 9/0, rev 1.10/0.01, addr 3> on uhub5
uhub6: 7 ports with 7 removable, self powered
Timecounters tick every 1.000 msec
hptrr: no controller detected.
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #6 Launched!
da0 at ciss0 bus 0 target 0 lun 0
da0: <COMPAQ RAID 1  VOLUME OK> Fixed Direct Access SCSI-5 device 
da0: 135.168MB/s transfers
da0: 34699MB (71065440 512 byte sectors: 255H 32S/T 8709C)
cd0 at umass-sim0 bus 0 target 0 lun 0
cd0: <FREECOM_ DVD+/-RW16B9 2.46> Removable CD-ROM SCSI-0 device 
cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/da0s1a