Pioneer DVR-110D lassuuuu...

Pioneer DVR-110D lassuuuu...

Hozzászólások

Segitsetek pliz.

Nemreg vettem a cimben szereplo cuccot, vadi uj 80 eres kabelen van (cable selectken master pozban), a winchi egy masik hasonlko 80 eresen.

DVD iraskor k3b-ben barmire allitom a sebesseget, az irast egy "unable to get event :-(" utan 12x akarja elkezdeni, majd atvalt 0,47x-re. Igy ugyebar 3 ora az iras kb :-P

Probaltam 3 fele DVD-vel is, sima cd-t 3x irt meg...

Eloszor is csinaltam firmware frissitest 1.22-re.

Atpakoltam egy kabelre a hdd-vel, de nem volt kulonseg, ugyhogy visszaraktam...

Probaltam rootkent irni, konzolbol, mas programmal, de semmi valtozas.

Irtam a pioneer supportnak is, googliztam, se valasz se eredmeny...

Pliiz segitsetek...

Egyeb adatok:

Slackware 10.2 gyari kernellel (2.4.31)

# hdparm -I /dev/hdc

/dev/hdc:

ATAPI CD-ROM, with removable media
Model Number: PIONEER DVD-RW DVR-110D
Serial Number: EGDL091643WL
Firmware Revision: 1.22
Standards:
Likely used CD-ROM ATAPI-1
Configuration:
DRQ response: 50us.
Packet size: 12 bytes
Capabilities:
LBA, IORDY(can be disabled)
Buffer size: 64.0kB
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 *udma4
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* DEVICE RESET cmd
* PACKET command feature set
* Power Management feature set
HW reset results:
CBLID- above Vih
Device num = 0 determined by CSEL

# hdparm -I /dev/hda

/dev/hda:

ATA device, with non-removable media
Model Number: ST3120022A
Serial Number: 3JT1QNP1
Firmware Revision: 3.06
Standards:
Used: ATA/ATAPI-6 T13 1410D revision 2
Supported: 6 5 4 3
Configuration:
Logical max current
cylinders 16383 64761
heads 16 1
sectors/track 63 255
--
CHS current addressable sectors: 16514055
LBA user addressable sectors: 234441648
LBA48 user addressable sectors: 234441648
device size with M = 1024*1024: 114473 MBytes
device size with M = 1000*1000: 120034 MBytes (120 GB)
Capabilities:
LBA, IORDY(can be disabled)
bytes avail on r/w long: 4 Queue depth: 1
Standby timer values: spec'd by Standard
R/W multiple sector transfer: Max = 16 Current = 16
Recommended acoustic management value: 128, current value: 0
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* Look-ahead
* Write cache
* Power Management feature set
Security Mode feature set
SMART feature set
* FLUSH CACHE EXT command
* Mandatory FLUSH CACHE command
* Device Configuration Overlay feature set
* 48-bit Address feature set
SET MAX security extension
* DOWNLOAD MICROCODE cmd
* SMART self-test
* SMART error logging
Security:
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
HW reset results:
CBLID- above Vih
Device num = 0 determined by CSEL
Checksum: correct

Megoldottam, SCSi mod kellett neki...