Üdv!
Van egy kicsit több mint 1 hónapos Samsung hd252hj lemezem, ami hűtve van. A Smart értékeknél sok a Pre-Fail érték. Most hazudik vagy sem?
Az adatok itt vannak: lacyc3.dyndns.org/Letoltesek/txt/hdd/samsunghd252hj.txt
Illetve általánosságba: Mennyire megbízható a SMART?
- 1320 megtekintés
Hozzászólások
Szerintem főleg a Reallocated_Sector_Ct, Reallocated_Event_Count és a Current_Pending_Sector count számít, ez itt mind 0, tehát szvsz jó a diszked.
- A hozzászóláshoz be kell jelentkezni
A hiba a felhasználóban van :)
Idézet a smartctl manpage-ből:
Please note: the fact that an Attribute is of type 'Pre-fail' does not mean that your disk is about to fail! It only has this meaning if the Attribute's current Normalized value is less than or equal to the threshold value.
- A hozzászóláshoz be kell jelentkezni
Köszi, akkor megnyugodtam :) Viszont általánosságban kellene valamit mondani hogy mennyire bízzak a smart-ban.
- A hozzászóláshoz be kell jelentkezni
Google vezetett mindenféle statisztikákat a lemezeinek meghibásodásáról.
Most csak ezt a linket találtam.
"Google determined that after receiving a SMART error, drives are 39 times more likely to fail than a drive that isn’t reporting one. Unfortunately, many other drives will also fail that never show a SMART warning (36% of SATA disks that failed were never detected by SMART)."
"...handing C++ to the average programmer seems roughly comparable to handing a loaded .45 to a chimpanzee."
-- Ted Ts'o
- A hozzászóláshoz be kell jelentkezni
Ebben a témában maga a Google is vizsgálódott:
http://hardware.slashdot.org/article.pl?sid=07/02/18/0420247
http://labs.google.com/papers/disk_failures.pdf
"models based on SMART parameters alone are unlikely to be useful for predicting individual drive failures"
- A hozzászóláshoz be kell jelentkezni