Egy DELL620-as laptopra 10.3 Suset tettem, amihez egy külső DELL E197FP TFT monitor csatlakozik. A Yast hardware része szépen föl is ismeri a külső monitort, azt mondja hogy 1280X1024 felbontást állít be neki - ami helyes - de nem azt csinálja amit mond. Valójában 1280X768 felbontást ákllít be, és semmiképp nem tudom rávenni, hogy ne tegye ezt, hanem a helyes felbontást állítsa be. Hol lehetne ezt kézzel jól beállítnai? A video kártya Intel 945 GM. (bocs az alapszintű kérdésért.) A.F.
- 828 megtekintés
Hozzászólások
modeline
ugy remlik, van valami i9x0 vagy i8x0 modelines csomag
t
- A hozzászóláshoz be kell jelentkezni
azvan, hogy a regi driverhez kell, az ujhoz nem. :)
- A hozzászóláshoz be kell jelentkezni
Volt már hasonló problémám, a "915resolution" telepítése volt a megoldás.
- A hozzászóláshoz be kell jelentkezni
Ha beírom, hogy 915resolution -l akkor szépen kíírja a modekat amik között ott van a Mode 58 = 1280X1024 felbondtás. Be is tudom ezt állítani, csak éppen miután újraindítom az X-et, visszaáll 1280X768-ra. A laptop a saját displayével 1280X800-as felbontásban jól működik, csak ezzel a külső monitorral rakoncátlankodik. Az xorg.conf-ban ez van, nem tudom ez mond-e valami értelmeset:
# /.../
# SaX generated X11 config file
# Created on: 2008-05-06T14:50:00+0200.
#
# Version: 8.1
# Contact: Marcus Schaefer , 2005
# Contact: SaX-User list
#
# Automatically generated by [ISaX] (8.1)
# PLEASE DO NOT EDIT THIS FILE!
#
Section "Files"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/URW"
FontPath "/usr/share/fonts/Speedo"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/latin2/misc:unscaled"
FontPath "/usr/share/fonts/latin2/75dpi:unscaled"
FontPath "/usr/share/fonts/latin2/100dpi:unscaled"
FontPath "/usr/share/fonts/latin2/Type1"
FontPath "/usr/share/fonts/latin7/75dpi:unscaled"
FontPath "/usr/share/fonts/baekmuk:unscaled"
FontPath "/usr/share/fonts/japanese:unscaled"
FontPath "/usr/share/fonts/kwintv"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/uni:unscaled"
FontPath "/usr/share/fonts/CID"
FontPath "/usr/share/fonts/ucs/misc:unscaled"
FontPath "/usr/share/fonts/ucs/75dpi:unscaled"
FontPath "/usr/share/fonts/ucs/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/misc:unscaled"
FontPath "/usr/share/fonts/hellas/75dpi:unscaled"
FontPath "/usr/share/fonts/hellas/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/Type1"
FontPath "/usr/share/fonts/misc/sgi:unscaled"
FontPath "/usr/share/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
InputDevices "/dev/gpmdata"
InputDevices "/dev/input/mice"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "on"
EndSection
Section "Module"
Load "dbe"
Load "type1"
Load "freetype"
Load "extmod"
Load "glx"
Load "dri"
EndSection
Section "InputDevice"
Driver "kbd"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "us"
Option "XkbModel" "microsoftpro"
Option "XkbRules" "xfree86"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Buttons" "9"
Option "Device" "/dev/input/mice"
Option "Name" "ImExPS/2 Logitech Wheel Mouse"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
DisplaySize 380 305
HorizSync 30-80
Identifier "Monitor[0]"
ModelName "DELL E197FP"
Option "DPMS"
VendorName "DEL"
VertRefresh 50-75
UseModes "Modes[0]"
EndSection
Section "Modes"
Identifier "Modes[0]"
Modeline "1280x1024" 106.97 1280 1360 1496 1712 1024 1025 1028 1059
Modeline "1280x1024" 87.75 1280 1328 1360 1440 1024 1027 1034 1053 +HSync -Vsync
Modeline "1152x864" 104.99 1152 1224 1352 1552 864 865 868 902
Modeline "1152x864" 96.77 1152 1224 1344 1536 864 865 868 900
Modeline "1152x864" 89.56 1152 1224 1344 1536 864 865 868 897
Modeline "1152x864" 86.75 1152 1200 1232 1312 864 867 871 895 +HSync -Vsync
Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895
Modeline "1024x768" 81.80 1024 1080 1192 1360 768 769 772 802
Modeline "1024x768" 76.16 1024 1080 1192 1360 768 769 772 800
Modeline "1024x768" 69.71 1024 1080 1184 1344 768 769 772 798
Modeline "1024x768" 69.50 1024 1072 1104 1184 768 771 775 796 +HSync -Vsync
Modeline "1024x768" 64.11 1024 1080 1184 1344 768 769 772 795
Modeline "800x600" 48.91 800 840 920 1040 600 601 604 627
Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625
Modeline "800x600" 44.00 800 848 880 960 600 603 607 622 +HSync -Vsync
Modeline "800x600" 42.11 800 840 920 1040 600 601 604 623
Modeline "800x600" 38.22 800 832 912 1024 600 601 604 622
Modeline "1280x1024" 108 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
EndSection
Section "Screen"
DefaultDepth 24
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "800x600"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection
Section "Device"
BoardName "945 GM"
BusID "0:2:0"
Driver "intel"
Identifier "Device[0]"
Option "monitor-VGA" "Monitor[0]"
Screen 0
VendorName "Intel"
EndSection
Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "off"
Screen "Screen[0]"
EndSection
Section "DRI"
Group "video"
Mode 0660
EndSection
Section "Extensions"
EndSection
- A hozzászóláshoz be kell jelentkezni