wlan kontra usb fusi amilo L7310gw-n ubuntu alatt

Notebook, laptop, mobiltelefon ...

Sziasztok!

Kb. egy hónapja vettem a címben említett notebookot a laptop.hu-nál, mint linuxos gépet (a win-es 20k-val több volt). Gondoltam, jobb is, ha linuxos, notebooknál úgyis van mindenféle fura periféria ami normális gépbe nincs, ha gyárilag linuxos a gép, legalább normálisan be lesz állítva, gyári driverek, ha kell, belőve, stb...

Ez volt az első tévedés :) A gépet úgy adták ide, hogy semmi nem volt rajta, de üsse kavics, raktam rá egy Ubuntut. Első körben minden szép volt és jó, viszont amikor előkerült egy pendrive, kiderült a turpisság:

Ha acpi be van kapcsolva a kernelbe, nem megy az usb alrendszer, mindenféle megszakításproblémára hivatkozva. A kernel javaslatot is tesz, hogy próbáljam ki a pci=noacpi-t. OK, kipróbáltam, usb megy, de ekkor meg a wifi modulok nem mennek (madwifi), mert ezeknek meg kell az acpi, mert azon keresztül intézik a megszakítást.

Gondoltam, még garanciális a cucc, oldja meg, aki eladta. Laptop.hu-nál közölték, hogy Serco kft a hivatalos szervíz, velük próbálkozzak, ők biztos tudnak segíteni. (Ja, eszembe ne jusson biost frissíteni - amihez a cd image a fujitsu-siemens.com -ról letölthető kb. két kattintás után - mert elvesztem a garanciát!!!) Felhívtam őket telefonon, mondták, hogy nem értik, mi a baj, vigyem be a gépet. Bevittem, mondták, hogy a linuxos csapat most épp nincs benn, de itt egy mail cím arra küldjek logokat és tuti segítenek. A logokat elküldtem, közölték, hogy használjak fedora-t, mert azt adták a géphez és csak ahhoz tudnak terméktámogatást nyújtani. A géphez egyébként egy nyamvadt knoppix cd-t adtak :) Letöltöttem a fedora mostani kernelét, hátha valahogy meg van patch-elve, de azzal se ment az usb, ha nem kapcsoltam ki az acpi-t.

Azóta (kb. 3 hete) írtam nekik 3 levelet, egyikre se válaszoltak. Na ennyit serco kft-ről :)

Van valakinek ötlete, mi lehet a gebasz?

Egy másik kérdésem, hogy hogy lehetne beállítani xorg-ot úgy, hogy a külső monitor normál 1024x768-as felbontásba 4:3 képarányba menjen, de az lcd 16:9-be. Valami miatt meghülyülnek a külső monitorok és kicsúszik a kép.

Köszi,
pentike

  • 5520 megtekintés

Kipróbáltam mindkettőt, de sajnos semmi. Rakok ide dmesg-t, hátha segít:

[4294667.296000] Linux version 2.6.15-19-686 (buildd@rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu3)) #1 SMP PREEMPT Mon Mar 20 17:33:20 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000001bfef000 (usable)
[4294667.296000] BIOS-e820: 000000001bff0000 - 000000001bffffc0 (ACPI data)
[4294667.296000] BIOS-e820: 000000001bffffc0 - 000000001c000000 (ACPI NVS)
[4294667.296000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 447MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 114671
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000] Normal zone: 110575 pages, LIFO batch:31
[4294667.296000] HighMem zone: 0 pages, LIFO batch:0
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 OID_00 ) @ 0x000e6010
[4294667.296000] ACPI: RSDT (v001 INSYDE FACP_000 0x00000100 0000 0x00010200) @ 0x1bffc3c0
[4294667.296000] ACPI: FADT (v001 INSYDE FACP_000 0x00000100 0000 0x00010200) @ 0x1bfffb10
[4294667.296000] ACPI: MADT (v001 INSYDE APIC_000 0x30303030 0000 0x00010200) @ 0x1bfffba0
[4294667.296000] ACPI: DSDT (v001 MTC___ 8650____ 0x00001000 INTL 0x02002036) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x1008
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 6:13 APIC version 20
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[4294667.296000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 20000000 (gap: 1c000000:e3f80000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda2 ro debug acpi_os_name="Microsoft Windows XP"
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[4294667.296000] Detected 1493.067 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294670.577000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294670.577000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294670.593000] Memory: 443396k/458684k available (2089k kernel code, 14728k reserved, 589k data, 328k init, 0k highmem)
[4294670.593000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294670.653000] Calibrating delay using timer specific routine.. 2988.12 BogoMIPS (lpj=1494061)
[4294670.653000] Security Framework v1.0.0 initialized
[4294670.653000] SELinux: Disabled at boot.
[4294670.653000] Mount-cache hash table entries: 512
[4294670.653000] CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000000 00000000 00000000
[4294670.653000] CPU: After vendor identify, caps: afe9fbff 00000000 00000000 00000000 00000000 00000000 00000000
[4294670.654000] CPU: L1 I cache: 32K, L1 D cache: 32K
[4294670.654000] CPU: L2 cache: 1024K
[4294670.654000] CPU: After all inits, caps: afe9fbff 00000000 00000000 00000040 00000000 00000000 00000000
[4294670.654000] mtrr: v2.0 (20020519)
[4294670.654000] Enabling fast FPU save and restore... done.
[4294670.654000] Enabling unmasked SIMD FPU exception support... done.
[4294670.655000] Checking 'hlt' instruction... OK.
[4294670.659000] SMP alternatives: switching to UP code
[4294670.659000] checking if image is initramfs... it is
[4294671.312000] Freeing initrd memory: 6557k freed
[4294671.322000] ACPI: Overriding _OS definition to 'Microsoft Windows XP'
[4294671.322000] ACPI: Looking for DSDT ... not found!
[4294671.334000] CPU0: Intel(R) Celeron(R) M processor 1.50GHz stepping 08
[4294671.334000] Total of 1 processors activated (2988.12 BogoMIPS).
[4294671.335000] ENABLING IO-APIC IRQs
[4294671.335000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[4294671.446000] Brought up 1 CPUs
[4294671.446000] NET: Registered protocol family 16
[4294671.446000] EISA bus registered
[4294671.446000] ACPI: bus type pci registered
[4294671.446000] PCI: PCI BIOS revision 2.10 entry at 0xe9c04, last bus=1
[4294671.446000] PCI: Using configuration type 1
[4294671.447000] ACPI: Subsystem revision 20051216
[4294671.450000] ACPI: Interpreter enabled
[4294671.450000] ACPI: Using IOAPIC for interrupt routing
[4294671.451000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294671.451000] PCI: Probing PCI hardware (bus 00)
[4294671.451000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[4294671.453000] PCI quirk: region 1000-107f claimed by vt8235 PM
[4294671.453000] PCI quirk: region 1400-140f claimed by vt8235 SMB
[4294671.454000] Boot video device is 0000:01:00.0
[4294671.454000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294671.471000] ACPI: Embedded Controller [EC0] (gpe 1) interrupt mode.
[4294671.472000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[4294671.472000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *7 10 11 14 15)
[4294671.473000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
[4294671.474000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 14 15)
[4294671.474000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[4294671.475000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[4294671.476000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[4294671.477000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[4294671.478000] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
[4294671.478000] ACPI: PCI Interrupt Link [ALKB] (IRQs 23) *11
[4294671.479000] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *5, disabled.
[4294671.479000] ACPI-0216: *** Error: Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node dbfd3200), AE_TYPE
[4294671.479000] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0
[4294671.480000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294671.480000] pnp: PnP ACPI init
[4294671.483000] pnp: PnPACPI: unknown resource type 7
[4294671.483000] pnp: PnPACPI: METHOD_NAME__CRS failure for SYN0c06
[4294671.483000] pnp: PnPACPI: unknown resource type 7
[4294671.483000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0303
[4294671.484000] pnp: PnPACPI: unknown resource type 7
[4294671.484000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0b00
[4294671.484000] pnp: PnPACPI: unknown resource type 7
[4294671.484000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0800
[4294671.484000] pnp: PnPACPI: unknown resource type 7
[4294671.484000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
[4294671.484000] pnp: PnPACPI: unknown resource type 7
[4294671.484000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0200
[4294671.484000] pnp: PnPACPI: unknown resource type 7
[4294671.484000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02
[4294671.484000] pnp: PnPACPI: unknown resource type 7
[4294671.484000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c04
[4294671.485000] pnp: PnP ACPI: found 0 devices
[4294671.485000] PnPBIOS: Disabled by ACPI PNP
[4294671.485000] PCI: Using ACPI for IRQ routing
[4294671.485000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294671.488000] PCI: Bridge: 0000:00:01.0
[4294671.488000] IO window: c000-dfff
[4294671.488000] MEM window: c0000000-cfffffff
[4294671.488000] PREFETCH window: 90000000-9fffffff
[4294671.488000] PCI: Bus 2, cardbus bridge: 0000:00:09.0
[4294671.488000] IO window: 00001800-000018ff
[4294671.488000] IO window: 00001c00-00001cff
[4294671.488000] PREFETCH window: 20000000-21ffffff
[4294671.489000] MEM window: 22000000-23ffffff
[4294671.489000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[4294671.489000] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 169
[4294671.489000] audit: initializing netlink socket (disabled)
[4294671.489000] audit(1149188623.487:1): initialized
[4294671.490000] VFS: Disk quotas dquot_6.5.1
[4294671.490000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294671.490000] Initializing Cryptographic API
[4294671.490000] io scheduler noop registered
[4294671.490000] io scheduler anticipatory registered
[4294671.490000] io scheduler deadline registered
[4294671.490000] io scheduler cfq registered
[4294671.490000] isapnp: Scanning for PnP cards...
[4294671.848000] isapnp: No Plug & Play device found
[4294671.865000] PNP: No PS/2 controller found. Probing ports directly.
[4294671.876000] i8042.c: Detected active multiplexing controller, rev 1.1.
[4294671.881000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[4294671.882000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[4294671.883000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[4294671.884000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[4294671.885000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294671.885000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294671.888000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294671.888000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294671.888000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294671.888000] ACPI: bus type ide registered
[4294671.888000] mice: PS/2 mouse device common for all mice
[4294671.890000] EISA: Probing bus 0 at eisa.0
[4294671.890000] Cannot allocate resource for EISA slot 1
[4294671.890000] EISA: Detected 0 cards.
[4294671.890000] NET: Registered protocol family 2
[4294671.902000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[4294671.902000] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[4294671.902000] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
[4294671.903000] TCP: Hash tables configured (established 16384 bind 16384)
[4294671.903000] TCP reno registered
[4294671.906000] TCP bic registered
[4294671.906000] NET: Registered protocol family 1
[4294671.906000] NET: Registered protocol family 8
[4294671.906000] NET: Registered protocol family 20
[4294671.906000] Using IPI No-Shortcut mode
[4294671.906000] ACPI wakeup devices:
[4294671.907000] SBTN LAN AC97 MC97 KBC
[4294671.907000] ACPI: (supports S0 S1 S3 S4 S5)
[4294671.907000] Freeing unused kernel memory: 328k freed
[4294671.918000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294671.954000] Capability LSM initialized
[4294671.989000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[4294671.989000] ACPI: Processor [CPU0] (supports 16 throttling states)
[4294672.384000] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[4294672.384000] **** SET: Misaligned resource pointer: dbc0b0c2 Type 07 Len 0
[4294672.384000] ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug.
[4294672.384000] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[4294672.384000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[4294672.384000] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 177
[4294672.384000] PCI: Via IRQ fixup for 0000:00:11.1, from 0 to 1
[4294672.385000] VP_IDE: chipset revision 6
[4294672.385000] VP_IDE: not 100% native mode: will probe irqs later
[4294672.385000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
[4294672.385000] ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio
[4294672.385000] ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio
[4294672.385000] Probing IDE interface ide0...
[4294672.771000] hda: SAMSUNG MP0603H, ATA DISK drive
[4294673.383000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294673.383000] Probing IDE interface ide1...
[4294674.177000] hdc: PHILIPS DVD+/-RW SDVD8431, ATAPI CD/DVD-ROM drive
[4294674.789000] ide1 at 0x170-0x177,0x376 on irq 15
[4294674.796000] hda: max request size: 1024KiB
[4294675.484000] hda: 117304992 sectors (60060 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
[4294675.485000] hda: cache flushes supported
[4294675.485000] hda: hda1 hda2 hda3
[4294675.498000] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[4294675.499000] Uniform CD-ROM driver Revision: 3.20
[4294675.838000] usbcore: registered new driver usbfs
[4294675.838000] usbcore: registered new driver hub
[4294675.840000] USB Universal Host Controller Interface driver v2.3
[4294675.841000] **** SET: Misaligned resource pointer: dbc6cc42 Type 07 Len 0
[4294675.841000] ACPI-0216: *** Error: Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node dbfd3200), AE_TYPE
[4294675.841000] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD] (likely buggy ACPI BIOS).
[4294675.841000] Try pci=noacpi or acpi=off
[4294675.842000] ACPI: PCI Interrupt 0000:00:10.0[A]: no GSI - using IRQ 11
[4294675.842000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[4294675.843000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[4294675.843000] uhci_hcd 0000:00:10.0: irq 11, io base 0x00001200
[4294675.845000] hub 1-0:1.0: USB hub found
[4294675.845000] hub 1-0:1.0: 2 ports detected
[4294675.946000] **** SET: Misaligned resource pointer: dbc6cac2 Type 07 Len 0
[4294675.946000] ACPI-0216: *** Error: Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node dbfd3200), AE_TYPE
[4294675.946000] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD] (likely buggy ACPI BIOS).
[4294675.946000] Try pci=noacpi or acpi=off
[4294675.946000] ACPI: PCI Interrupt 0000:00:10.1[B]: no GSI - using IRQ 7
[4294675.946000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[4294675.947000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[4294675.947000] uhci_hcd 0000:00:10.1: irq 7, io base 0x00001220
[4294675.947000] hub 2-0:1.0: USB hub found
[4294675.947000] hub 2-0:1.0: 2 ports detected
[4294676.048000] **** SET: Misaligned resource pointer: dbc6c942 Type 07 Len 0
[4294676.048000] ACPI-0216: *** Error: Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node dbfd3200), AE_TYPE
[4294676.048000] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD] (likely buggy ACPI BIOS).
[4294676.048000] Try pci=noacpi or acpi=off
[4294676.048000] ACPI: PCI Interrupt 0000:00:10.2[C]: no GSI - using IRQ 5
[4294676.048000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[4294676.048000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[4294676.049000] uhci_hcd 0000:00:10.2: irq 5, io base 0x00001240
[4294676.049000] hub 3-0:1.0: USB hub found
[4294676.049000] hub 3-0:1.0: 2 ports detected
[4294676.152000] PCI: Enabling device 0000:00:10.3 (0000 -> 0002)
[4294676.152000] **** SET: Misaligned resource pointer: dbc6c1c2 Type 07 Len 0
[4294676.152000] ACPI-0216: *** Error: Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node dbfd3200), AE_TYPE
[4294676.152000] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD] (likely buggy ACPI BIOS).
[4294676.152000] Try pci=noacpi or acpi=off
[4294676.152000] ACPI: PCI Interrupt 0000:00:10.3[D]: no GSI - using IRQ 10
[4294676.152000] ehci_hcd 0000:00:10.3: EHCI Host Controller
[4294676.153000] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[4294676.153000] ehci_hcd 0000:00:10.3: irq 10, io mem 0x24011000
[4294676.153000] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294676.153000] hub 4-0:1.0: USB hub found
[4294676.153000] hub 4-0:1.0: 6 ports detected

( ngy_tms | 2007. 07. 21., szo – 18:59 )

Amilo Li1705.

BIOS-t is frissítettem a CD image-dzsel.
A BIOS bugot az Ubuntu még mindig kiírja, WinXP nem települ.

Fordított a problémám, 16:9-be kéne állítani a TFT-t, de nem tudom hogy, most 800x600-ban megy.

( rudanj | 2007. 10. 29., h – 12:56 )

nekem sikerult megoldani a dolgot:
grub-ba kernel paramternek be kell irni, hogy irqpoll, es kicsit lassabban indul a rendszer, de cserébe megy a wifi és az usb (usb-re kötött egér) is.

talaltam valami leirast, amiben a "acpi=off irqpoll" illetve a "noapictimer irqpoll" paramterlistat ajanlottak, de aztan nemi probalkozas utan kiderult, hogy elegendo az irqpoll a dolog megoldasahoz.

sok szerencset mindenkinek, aki hasonlo dolgokkal kuzd... :)

( illesjosh | 2008. 01. 10., cs – 02:11 )

Sziasztok!

Nekem is ilyen laptopom van és ugyanígy (vagy acpi vagy usb) szívok is vele másfél éve lassan. Viszont multkor kipróbáltam egy FreeBSD live cd-t és ment szépen az usb is meg a beépített wifi is egyszerre, csak lestem. :) Más kérdés, hogy a bsd nem linux :P, de nem is Windows. :)

Josh