Sarge netinstall, utána meg Etch buhera. Eredmény: gondok az x.org-gal :(

Sziasztok.

Ugy döntöttem, hogy feltelepítek egy Debiant. Van nekem egy Sarge DVD-m, jobban mondva csak volt, mivel rejtélyes körülmények között olvashatatlanná vált. Chello light-tal egy netinstall iso-n kivül mást nem nagyon volt türelmem leszedni. Feltelepítettem, de mivel ugy döntöttem, hogy nekem x.org kell, ezért az alap install után az apt sources.list-ben a sorokat átírtam etch-es repositorykra. Az apt-get update/upgrade parancsok frankón fel is frissítették a programokat. Ezután beállítottam egy-két dolgot, hogy nekem jó legyen, majd ugy gondoltam, hogy feltelepítem az x.org-ot, amit annyira akartam. Egy apt-get install xserver* parancs kiadasa utan fel is telepitett elég sok mindent (remelem ez a parancs jo, es nem valami massal kellett volna csinalni). Ezutan egy apt-get install gdm kovetkezett. Miutan ezt is megcsinalta, gondoltam elindítom az ablakozot. Startx, és már indult is. Egy problémám volt csak vele, hogy nagyon lassan csinalta a dolgat. Miutan bejott a bejelentkezo kepernyo, gondoltam userkent be is jelentkezem. Ekkor jott a bokkeno, ugyanis a splash screen beall, kijelzi, hogy az ablakkezelot tolti be, es ennyi. Az x.org.log-ban ez van legutoljara:

drmOpenDevice: node name is /dev/dri/card253
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card254
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed

Ezt a fenti reszt amint lathato 254-szer hajtja vegre, az eredmeny alabb lathato.

(II) RADEON(0): [drm] drmOpen failed
(EE) RADEON(0): [dri] DRIScreenInit failed. Disabling DRI.
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Memory manager initialized to (0,0) (1024,8191)
(II) RADEON(0): Reserved area from (0,768) to (1024,770)
(II) RADEON(0): Largest offscreen area available: 1024 x 7421
(II) RADEON(0): Render acceleration unsupported on Radeon 9500/9700 and newer.
(II) RADEON(0): Render acceleration disabled
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): Backing store disabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 770)
(II) RADEON(0): Largest offscreen area available: 1024 x 7417
(**) Option "dpms"
(**) RADEON(0): DPMS enabled
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Reloading /usr/X11R6/lib/modules/libi2c.so
(II) RADEON(0): Using R200 i2c bus access method
(II) RADEON(0): I2C bus "Radeon multimedia bus" initialized.
(II) Loading sub module "fi1236"
(II) LoadModule: "fi1236"
(II) Loading /usr/X11R6/lib/modules/multimedia/fi1236_drv.so
(II) Module fi1236: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) Loading sub module "uda1380"
(II) LoadModule: "uda1380"
(II) Loading /usr/X11R6/lib/modules/multimedia/uda1380_drv.so
(II) Module uda1380: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) Loading sub module "msp3430"
(II) LoadModule: "msp3430"
(II) Loading /usr/X11R6/lib/modules/multimedia/msp3430_drv.so
(II) Module msp3430: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/X11R6/lib/modules/multimedia/theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) RADEON(0): No response from device 0 on VIP bus
(II) RADEON(0): Device 1 on VIP bus ids as 0x4d541002
(II) RADEON(0): No response from device 2 on VIP bus
(II) RADEON(0): No response from device 3 on VIP bus
(II) RADEON(0): Detected Rage Theatre as device 1 on VIP bus with id 0x4d541002
(II) RADEON(0): Detected Rage Theatre revision 00000003
(II) RADEON(0): video decoder type is 0x4e20 (BIOS value) versus 0x4e20 (current PLL setting)
(II) RADEON(0): Composite connector is port 2
(II) RADEON(0): SVideo connector is port 6
(II) RADEON(0): Rage Theatre: Connectors (detected): tuner=0, composite=2, svideo=6
(II) RADEON(0): RageTheatre: Connectors (using): tuner=0, composite=2, svideo=6
(II) RADEON(0): video decoder type used: 0x0006
(II) RADEON(0): Going to load the corresponding theatre module
(II) Loading sub module "theatre"
(II) LoadModule: "theatre"
(II) Loading /usr/X11R6/lib/modules/multimedia/theatre_drv.so
(II) Module theatre: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) RADEON(0): Rage Theatre setting standard 0x0000
(II) RADEON(0): Rage Theatre setting standard 0x0000
(II) RADEON(0): Rage Theatre setting standard 0x0000
(WW) RADEON(0): Direct rendering disabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "hu"
(**) Generic Keyboard: XkbLayout: "hu"
(**) Option "XkbVariant" "hu"
(**) Generic Keyboard: XkbVariant: "hu"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ImPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Warning: font renderer for ".pcf" already registered at priority 0
Warning: font renderer for ".pcf.Z" already registered at priority 0
Warning: font renderer for ".pcf.gz" already registered at priority 0
Warning: font renderer for ".snf" already registered at priority 0
Warning: font renderer for ".snf.Z" already registered at priority 0
Warning: font renderer for ".snf.gz" already registered at priority 0
Warning: font renderer for ".bdf" already registered at priority 0
Warning: font renderer for ".bdf.Z" already registered at priority 0
Warning: font renderer for ".bdf.gz" already registered at priority 0
Warning: font renderer for ".pmf" already registered at priority 0
Could not init font path element unix/:7100, removing from list!
FreeFontPath: FPE "/usr/lib/X11/fonts/misc" refcount is 2, should be 1; fixing.

Aztan itt lelottem. Elobb egy Ctrl+Alt+Backspace komboval probalkoztam de semmi. Majd egy Ctrl+Alt+Delete jott, vegulis nagy nehezen ujrainditottam. Ezt mar win alol irom, a Total Commander beepulojevel masoltam a logot, hogy tudjak irni.

Remelem tud valaki megoldast. Elvileg mukodokepes, mert sikerult beállítani az ekezetes betuket is faszan: az ablakkezelőt is rendes 'ő'-vel írja. Elvileg ezt az apt-get install msttcorefonts paranccsal sikerült elérni.

Előre is köszi a segítséget.