hw pron

Linux version 2.6.18-194.32.1.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Wed Jan 5 17:52:25 EST 2011
Command line: ro root=/dev/VolGroup00/LogVol00
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000010000 - 0000000000098000 (usable)
 BIOS-e820: 0000000000098000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007f740000 (usable)
 BIOS-e820: 000000007f74e000 - 000000007f750000 type 9
 BIOS-e820: 000000007f750000 - 000000007f75e000 (ACPI data)
 BIOS-e820: 000000007f75e000 - 000000007f7d0000 (ACPI NVS)
 BIOS-e820: 000000007f7d0000 - 000000007f7e0000 (reserved)
 BIOS-e820: 000000007f7ec000 - 0000000090000000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000880000000 (usable)
DMI present.
ACPI: RSDP (v002 SUN                                   ) @ 0x00000000000faf70
ACPI: XSDT (v001 SUN    X4470    0x20100729 MSFT 0x00000097) @ 0x000000007f750100
ACPI: FADT (v004 SUN    X4470    0x20100729 MSFT 0x00000097) @ 0x000000007f750290
ACPI: MADT (v002 SUN    X4470    0x20100729 MSFT 0x00000097) @ 0x000000007f750390
ACPI: SPCR (v001 SUN    X4470    0x20100729 MSFT 0x00000097) @ 0x000000007f750600
ACPI: MCFG (v001 SUN    X4470    0x20100729 MSFT 0x00000097) @ 0x000000007f750650
ACPI: SLIT (v001 SUN    X4470    0x20100729 MSFT 0x00000097) @ 0x000000007f750690
ACPI: SPMI (v005 SUN    X4470    0x20100729 MSFT 0x00000097) @ 0x000000007f7506d0
ACPI: OEMB (v001 SUN    X4470    0x20100729 MSFT 0x00000097) @ 0x000000007f75e040
ACPI: SRAT (v002 SUN    X4470    0x00000001 INTL 0x00000001) @ 0x000000007f75a720
ACPI: HPET (v001 SUN    X4470    0x20100729 MSFT 0x00000097) @ 0x000000007f75ab40
ACPI: DMAR (v001    AMI  OEMDMAR 0x00000001 MSFT 0x00000097) @ 0x000000007f75e110
ACPI: SSDT (v002 DpgPmm    CpuPm 0x00000012 INTL 0x20051117) @ 0x000000007f76d3d0
ACPI: EINJ (v001 SUN    X4470    0x20100729 MSFT 0x00000097) @ 0x000000007f75ab80
ACPI: BERT (v001 SUN    X4470    0x20100729 MSFT 0x00000097) @ 0x000000007f75ad10
ACPI: ERST (v001 SUN    X4470    0x20100729 MSFT 0x00000097) @ 0x000000007f75ad40
ACPI: HEST (v001 SUN    X4470    0x20100729 MSFT 0x00000097) @ 0x000000007f75aef0
ACPI: DSDT (v002 SUN    X4470    0x00000001 INTL 0x20051117) @ 0x0000000000000000
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 4 -> Node 0
SRAT: PXM 0 -> APIC 6 -> Node 0
SRAT: PXM 0 -> APIC 16 -> Node 0
SRAT: PXM 0 -> APIC 18 -> Node 0
SRAT: PXM 0 -> APIC 22 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 0 -> APIC 5 -> Node 0
SRAT: PXM 0 -> APIC 7 -> Node 0
SRAT: PXM 0 -> APIC 17 -> Node 0
SRAT: PXM 0 -> APIC 19 -> Node 0
SRAT: PXM 0 -> APIC 23 -> Node 0
SRAT: PXM 1 -> APIC 32 -> Node 1
SRAT: PXM 1 -> APIC 36 -> Node 1
SRAT: PXM 1 -> APIC 38 -> Node 1
SRAT: PXM 1 -> APIC 48 -> Node 1
SRAT: PXM 1 -> APIC 50 -> Node 1
SRAT: PXM 1 -> APIC 54 -> Node 1
SRAT: PXM 1 -> APIC 33 -> Node 1
SRAT: PXM 1 -> APIC 37 -> Node 1
SRAT: PXM 1 -> APIC 39 -> Node 1
SRAT: PXM 1 -> APIC 49 -> Node 1
SRAT: PXM 1 -> APIC 51 -> Node 1
SRAT: PXM 1 -> APIC 55 -> Node 1
SRAT: PXM 2 -> APIC 64 -> Node 2
SRAT: PXM 2 -> APIC 68 -> Node 2
SRAT: PXM 2 -> APIC 70 -> Node 2
SRAT: PXM 2 -> APIC 80 -> Node 2
SRAT: PXM 2 -> APIC 82 -> Node 2
SRAT: PXM 2 -> APIC 86 -> Node 2
SRAT: PXM 2 -> APIC 65 -> Node 2
SRAT: PXM 2 -> APIC 69 -> Node 2
SRAT: PXM 2 -> APIC 71 -> Node 2
SRAT: PXM 2 -> APIC 81 -> Node 2
SRAT: PXM 2 -> APIC 83 -> Node 2
SRAT: PXM 2 -> APIC 87 -> Node 2
SRAT: PXM 3 -> APIC 96 -> Node 3
SRAT: PXM 3 -> APIC 100 -> Node 3
SRAT: PXM 3 -> APIC 102 -> Node 3
SRAT: PXM 3 -> APIC 112 -> Node 3
SRAT: PXM 3 -> APIC 114 -> Node 3
SRAT: PXM 3 -> APIC 118 -> Node 3
SRAT: PXM 3 -> APIC 97 -> Node 3
SRAT: PXM 3 -> APIC 101 -> Node 3
SRAT: PXM 3 -> APIC 103 -> Node 3
SRAT: PXM 3 -> APIC 113 -> Node 3
SRAT: PXM 3 -> APIC 115 -> Node 3
SRAT: PXM 3 -> APIC 119 -> Node 3
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 0-80000000
SRAT: Node 0 PXM 0 0-280000000
SRAT: Node 1 PXM 1 280000000-480000000
SRAT: Node 2 PXM 2 480000000-680000000
SRAT: Node 3 PXM 3 680000000-880000000
NUMA: Using 31 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000280000000
Bootmem setup node 1 0000000280000000-0000000480000000
Bootmem setup node 2 0000000480000000-0000000680000000
Bootmem setup node 3 0000000680000000-0000000880000000
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
On node 0 totalpages: 2057622
  DMA zone: 2590 pages, LIFO batch:0
  DMA32 zone: 503672 pages, LIFO batch:31
  Normal zone: 1551360 pages, LIFO batch:31
On node 1 totalpages: 2068480
  Normal zone: 2068480 pages, LIFO batch:31
On node 2 totalpages: 2068480
  Normal zone: 2068480 pages, LIFO batch:31
On node 3 totalpages: 2068480
  Normal zone: 2068480 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
Processor #4 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
Processor #6 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
Processor #16 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
Processor #18 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x16] enabled)
Processor #22 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x20] enabled)
Processor #32 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x24] enabled)
Processor #36 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x26] enabled)
Processor #38 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x30] enabled)
Processor #48 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x32] enabled)
Processor #50 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x36] enabled)
Processor #54 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x40] enabled)
Processor #64 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x44] enabled)
Processor #68 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x46] enabled)
Processor #70 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x50] enabled)
Processor #80 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x52] enabled)
Processor #82 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x56] enabled)
Processor #86 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x60] enabled)
Processor #96 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x64] enabled)
Processor #100 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x66] enabled)
Processor #102 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x70] enabled)
Processor #112 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x72] enabled)
Processor #114 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x76] enabled)
Processor #118 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x01] enabled)
Processor #1 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x05] enabled)
Processor #5 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x07] enabled)
Processor #7 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x11] enabled)
Processor #17 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x13] enabled)
Processor #19 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x17] enabled)
Processor #23 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x21] enabled)
Processor #33 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x20] lapic_id[0x25] enabled)
Processor #37 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x21] lapic_id[0x27] enabled)
Processor #39 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x22] lapic_id[0x31] enabled)
Processor #49 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x23] lapic_id[0x33] enabled)
Processor #51 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x24] lapic_id[0x37] enabled)
Processor #55 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x25] lapic_id[0x41] enabled)
Processor #65 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x26] lapic_id[0x45] enabled)
Processor #69 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x27] lapic_id[0x47] enabled)
Processor #71 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x28] lapic_id[0x51] enabled)
Processor #81 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x29] lapic_id[0x53] enabled)
Processor #83 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x2a] lapic_id[0x57] enabled)
Processor #87 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x2b] lapic_id[0x61] enabled)
Processor #97 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x2c] lapic_id[0x65] enabled)
Processor #101 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x2d] lapic_id[0x67] enabled)
Processor #103 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x2e] lapic_id[0x71] enabled)
Processor #113 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x2f] lapic_id[0x73] enabled)
Processor #115 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x30] lapic_id[0x77] enabled)
Processor #119 6:14 APIC version 21
ACPI: LAPIC (acpi_id[0x31] lapic_id[0xb0] disabled)
ACPI: LAPIC (acpi_id[0x32] lapic_id[0xb1] disabled)
ACPI: LAPIC (acpi_id[0x33] lapic_id[0xb2] disabled)
ACPI: LAPIC (acpi_id[0x34] lapic_id[0xb3] disabled)
ACPI: LAPIC (acpi_id[0x35] lapic_id[0xb4] disabled)
ACPI: LAPIC (acpi_id[0x36] lapic_id[0xb5] disabled)
ACPI: LAPIC (acpi_id[0x37] lapic_id[0xb6] disabled)
ACPI: LAPIC (acpi_id[0x38] lapic_id[0xb7] disabled)
ACPI: LAPIC (acpi_id[0x39] lapic_id[0xb8] disabled)
ACPI: LAPIC (acpi_id[0x3a] lapic_id[0xb9] disabled)
ACPI: LAPIC (acpi_id[0x3b] lapic_id[0xba] disabled)
ACPI: LAPIC (acpi_id[0x3c] lapic_id[0xbb] disabled)
ACPI: LAPIC (acpi_id[0x3d] lapic_id[0xbc] disabled)
ACPI: LAPIC (acpi_id[0x3e] lapic_id[0xbd] disabled)
ACPI: LAPIC (acpi_id[0x3f] lapic_id[0xbe] disabled)
ACPI: LAPIC (acpi_id[0x40] lapic_id[0xbf] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec02000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec02000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfec04000] gsi_base[48])
IOAPIC[2]: apic_id 10, version 32, address 0xfec04000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to clustered
ACPI: HPET id: 0x8086a301 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Nosave address range: 0000000000098000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000e0000
Nosave address range: 00000000000e0000 - 0000000000100000
Nosave address range: 000000007f740000 - 000000007f74e000
Nosave address range: 000000007f74e000 - 000000007f750000
Nosave address range: 000000007f750000 - 000000007f75e000
Nosave address range: 000000007f75e000 - 000000007f7d0000
Nosave address range: 000000007f7d0000 - 000000007f7e0000
Nosave address range: 000000007f7e0000 - 000000007f7ec000
Nosave address range: 000000007f7ec000 - 0000000090000000
Nosave address range: 0000000090000000 - 00000000fee00000
Nosave address range: 00000000fee00000 - 00000000fee01000
Nosave address range: 00000000fee01000 - 00000000ffc00000
Nosave address range: 00000000ffc00000 - 0000000100000000
Allocating PCI resources starting at 98000000 (gap: 90000000:6ee00000)
SMP: Allowing 64 CPUs, 16 hotplug CPUs
Built 4 zonelists.  Total pages: 8263062
Kernel command line: ro root=/dev/VolGroup00/LogVol00
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Checking aperture...
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x40a1000 - 0x80a1000
Memory: 32930800k/35651584k available (2575k kernel code, 614192k reserved, 1304k data, 212k init)
Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.06 BogoMIPS (lpj=1862033)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 0/0 -> Node 0
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM1)
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
Using local APIC timer interrupts.
Detected 8.312 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/48 APIC 0x4
Initializing CPU#1
Calibrating delay using timer specific routine.. 7866.34 BogoMIPS (lpj=3933174)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 1/4 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU1: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 2/48 APIC 0x6
Initializing CPU#2
Calibrating delay using timer specific routine.. 3723.98 BogoMIPS (lpj=1861993)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 2/6 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU2: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 3/48 APIC 0x10
Initializing CPU#3
Calibrating delay using timer specific routine.. 3724.02 BogoMIPS (lpj=1862010)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 3/10 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 8
CPU3: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 4/48 APIC 0x12
Initializing CPU#4
Calibrating delay using timer specific routine.. 3724.03 BogoMIPS (lpj=1862019)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 4/12 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 9
CPU4: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 5/48 APIC 0x16
Initializing CPU#5
Calibrating delay using timer specific routine.. 3723.95 BogoMIPS (lpj=1861975)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 5/16 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 11
CPU5: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 6/48 APIC 0x20
Initializing CPU#6
Calibrating delay using timer specific routine.. 3724.09 BogoMIPS (lpj=1862047)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 6/20 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU6: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 7/48 APIC 0x24
Initializing CPU#7
Calibrating delay using timer specific routine.. 3898.05 BogoMIPS (lpj=1949028)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 7/24 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 2
CPU7: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 8/48 APIC 0x26
Initializing CPU#8
Calibrating delay using timer specific routine.. 3724.07 BogoMIPS (lpj=1862036)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 8/26 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 3
CPU8: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 9/48 APIC 0x30
Initializing CPU#9
Calibrating delay using timer specific routine.. 3724.13 BogoMIPS (lpj=1862069)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 9/30 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 8
CPU9: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 10/48 APIC 0x32
Initializing CPU#10
Calibrating delay using timer specific routine.. 3724.07 BogoMIPS (lpj=1862039)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 10/32 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 9
CPU10: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 11/48 APIC 0x36
Initializing CPU#11
Calibrating delay using timer specific routine.. 3723.97 BogoMIPS (lpj=1861987)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 11/36 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 11
CPU11: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 12/48 APIC 0x40
Initializing CPU#12
Calibrating delay using timer specific routine.. 3724.00 BogoMIPS (lpj=1862003)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 12/40 -> Node 2
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 0
CPU12: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 13/48 APIC 0x44
Initializing CPU#13
Calibrating delay using timer specific routine.. 3724.16 BogoMIPS (lpj=1862084)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 13/44 -> Node 2
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 2
CPU13: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 14/48 APIC 0x46
Initializing CPU#14
Calibrating delay using timer specific routine.. 3724.03 BogoMIPS (lpj=1862015)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 14/46 -> Node 2
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 3
CPU14: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 15/48 APIC 0x50
Initializing CPU#15
Calibrating delay using timer specific routine.. 3724.10 BogoMIPS (lpj=1862053)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 15/50 -> Node 2
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 8
CPU15: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 16/48 APIC 0x52
Initializing CPU#16
Calibrating delay using timer specific routine.. 3724.00 BogoMIPS (lpj=1862000)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 16/52 -> Node 2
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 9
CPU16: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 17/48 APIC 0x56
Initializing CPU#17
Calibrating delay using timer specific routine.. 3724.04 BogoMIPS (lpj=1862024)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 17/56 -> Node 2
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 11
CPU17: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 18/48 APIC 0x60
Initializing CPU#18
Calibrating delay using timer specific routine.. 3724.17 BogoMIPS (lpj=1862087)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 18/60 -> Node 3
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 0
CPU18: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 19/48 APIC 0x64
Initializing CPU#19
Calibrating delay using timer specific routine.. 3724.06 BogoMIPS (lpj=1862034)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 19/64 -> Node 3
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 2
CPU19: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 20/48 APIC 0x66
Initializing CPU#20
Calibrating delay using timer specific routine.. 3724.05 BogoMIPS (lpj=1862026)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 20/66 -> Node 3
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 3
CPU20: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 21/48 APIC 0x70
Initializing CPU#21
Calibrating delay using timer specific routine.. 3724.05 BogoMIPS (lpj=1862029)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 21/70 -> Node 3
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 8
CPU21: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 22/48 APIC 0x72
Initializing CPU#22
Calibrating delay using timer specific routine.. 3724.02 BogoMIPS (lpj=1862013)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 22/72 -> Node 3
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 9
CPU22: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 23/48 APIC 0x76
Initializing CPU#23
Calibrating delay using timer specific routine.. 3724.09 BogoMIPS (lpj=1862049)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 23/76 -> Node 3
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 11
CPU23: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 24/48 APIC 0x1
Initializing CPU#24
Calibrating delay using timer specific routine.. 3724.06 BogoMIPS (lpj=1862032)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 24/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU24: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 25/48 APIC 0x5
Initializing CPU#25
Calibrating delay using timer specific routine.. 3723.98 BogoMIPS (lpj=1861993)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 25/5 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU25: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 26/48 APIC 0x7
Initializing CPU#26
Calibrating delay using timer specific routine.. 3724.04 BogoMIPS (lpj=1862020)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 26/7 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU26: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 27/48 APIC 0x11
Initializing CPU#27
Calibrating delay using timer specific routine.. 3724.04 BogoMIPS (lpj=1862024)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 27/11 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 8
CPU27: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 28/48 APIC 0x13
Initializing CPU#28
Calibrating delay using timer specific routine.. 3724.02 BogoMIPS (lpj=1862013)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 28/13 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 9
CPU28: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 29/48 APIC 0x17
Initializing CPU#29
Calibrating delay using timer specific routine.. 3750.18 BogoMIPS (lpj=1875092)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 29/17 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 11
CPU29: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 30/48 APIC 0x21
Initializing CPU#30
Calibrating delay using timer specific routine.. 3724.01 BogoMIPS (lpj=1862005)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 30/21 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU30: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 31/48 APIC 0x25
Initializing CPU#31
Calibrating delay using timer specific routine.. 3724.07 BogoMIPS (lpj=1862035)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 31/25 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 2
CPU31: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 32/48 APIC 0x27
Initializing CPU#32
Calibrating delay using timer specific routine.. 3724.07 BogoMIPS (lpj=1862036)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 32/27 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 3
CPU32: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 33/48 APIC 0x31
Initializing CPU#33
Calibrating delay using timer specific routine.. 3548.48 BogoMIPS (lpj=1774240)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 33/31 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 8
CPU33: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 34/48 APIC 0x33
Initializing CPU#34
Calibrating delay using timer specific routine.. 3724.06 BogoMIPS (lpj=1862031)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 34/33 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 9
CPU34: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 35/48 APIC 0x37
Initializing CPU#35
Calibrating delay using timer specific routine.. 3724.06 BogoMIPS (lpj=1862031)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 35/37 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 11
CPU35: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 36/48 APIC 0x41
Initializing CPU#36
Calibrating delay using timer specific routine.. 3724.04 BogoMIPS (lpj=1862023)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 36/41 -> Node 2
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 0
CPU36: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 37/48 APIC 0x45
Initializing CPU#37
Calibrating delay using timer specific routine.. 3724.05 BogoMIPS (lpj=1862029)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 37/45 -> Node 2
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 2
CPU37: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 38/48 APIC 0x47
Initializing CPU#38
Calibrating delay using timer specific routine.. 3724.06 BogoMIPS (lpj=1862030)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 38/47 -> Node 2
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 3
CPU38: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 39/48 APIC 0x51
Initializing CPU#39
Calibrating delay using timer specific routine.. 3724.07 BogoMIPS (lpj=1862037)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 39/51 -> Node 2
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 8
CPU39: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 40/48 APIC 0x53
Initializing CPU#40
Calibrating delay using timer specific routine.. 3724.06 BogoMIPS (lpj=1862031)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 40/53 -> Node 2
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 9
CPU40: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 41/48 APIC 0x57
Initializing CPU#41
Calibrating delay using timer specific routine.. 3724.06 BogoMIPS (lpj=1862031)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 41/57 -> Node 2
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 11
CPU41: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 42/48 APIC 0x61
Initializing CPU#42
Calibrating delay using timer specific routine.. 3724.06 BogoMIPS (lpj=1862030)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 42/61 -> Node 3
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 0
CPU42: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 43/48 APIC 0x65
Initializing CPU#43
Calibrating delay using timer specific routine.. 3724.06 BogoMIPS (lpj=1862034)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 43/65 -> Node 3
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 2
CPU43: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 44/48 APIC 0x67
Initializing CPU#44
Calibrating delay using timer specific routine.. 3724.00 BogoMIPS (lpj=1862003)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 44/67 -> Node 3
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 3
CPU44: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 45/48 APIC 0x71
Initializing CPU#45
Calibrating delay using timer specific routine.. 3724.06 BogoMIPS (lpj=1862033)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 45/71 -> Node 3
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 8
CPU45: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 46/48 APIC 0x73
Initializing CPU#46
Calibrating delay using timer specific routine.. 3724.20 BogoMIPS (lpj=1862100)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 46/73 -> Node 3
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 9
CPU46: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 47/48 APIC 0x77
Initializing CPU#47
Calibrating delay using timer specific routine.. 3724.07 BogoMIPS (lpj=1862036)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 47/77 -> Node 3
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 11
CPU47: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E7530  @ 1.87GHz stepping 06
Brought up 48 CPUs
testing NMI watchdog ... OK.
time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
time.c: Detected 1862.033 MHz processor.
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=216 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=96 bytes
sizeof(skbuff)=248 bytes
migration_cost=2,24,877
checking if image is initramfs... it is
Freeing initrd memory: 3406k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at 80000000
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Root Bridge [BR50] (0000:80)
ACPI: PCI Interrupt Routing Table [\_SB_.BR50._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.BR50.NPE0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.BR50.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.BR50.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.BR50.NPE7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.BR50.NPE9._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 6 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 16 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0
hpet0: 4 64-bit timers, 14318180 Hz
DMAR:Host address width 46
DMAR:DRHD base: 0x000000f3cfe000 flags: 0x0
IOMMU f3cfe000: ver 1:0 cap c90780106f0462 ecap f020fe
DMAR:DRHD base: 0x000000cf3fe000 flags: 0x1
IOMMU cf3fe000: ver 1:0 cap c90780106f0462 ecap f020fe
DMAR:RMRR base: 0x000000000ec000 end: 0x000000000effff
DMAR:RMRR base: 0x0000007f7ec000 end: 0x0000007f7fffff
DMAR:ATSR flags: 0x0
DMAR:Unsupported device scope
DMAR:Device scope device [0000:80:14.01] not found
DMAR:Device scope device [0000:80:14.01] not found
DMAR:Device scope device [0000:80:14.02] not found
DMAR:Device scope device [0000:80:14.02] not found
PCI-GART: No AMD northbridge found.
pnp: 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
pnp: 00:01: iomem range 0xfd000000-0xfdffffff has been reserved
pnp: 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
pnp: 00:06: ioport range 0xa00-0xa0f has been reserved
pnp: 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
pnp: 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
pnp: 00:07: iomem range 0xfed40000-0xfed8ffff has been reserved
pnp: 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
pnp: 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
pnp: 00:0c: iomem range 0x80000000-0x8fffffff could not be reserved
pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0d: iomem range 0xc0000-0xcffff could not be reserved
pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0d: iomem range 0x100000-0xffffffff could not be reserved
pnp: 00:0f: iomem range 0xf3cfe000-0xf3cfffff has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:05.0
  IO window: 5000-5fff
  MEM window: cf400000-cf4fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:32:00.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:32:01.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:36:00.0
  IO window: 6000-6fff
  MEM window: c7f00000-caffffff
  PREFETCH window 0x00000000bc000000-0x00000000bfffffff
PCI: Bridge: 0000:36:01.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:36:02.0
  IO window: 7000-7fff
  MEM window: cbf00000-ceffffff
  PREFETCH window 0x00000000c0000000-0x00000000c3ffffff
PCI: Bridge: 0000:36:03.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:35:00.0
  IO window: 6000-7fff
  MEM window: c7f00000-ceffffff
  PREFETCH window 0x00000000bc000000-0x00000000c3ffffff
PCI: Bridge: 0000:32:02.0
  IO window: 6000-7fff
  MEM window: c7f00000-ceffffff
  PREFETCH window 0x00000000bc000000-0x00000000c3ffffff
PCI: Bridge: 0000:32:03.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:31:00.0
  IO window: 6000-7fff
  MEM window: c7f00000-ceffffff
  PREFETCH window 0x00000000bc000000-0x00000000c3ffffff
PCI: Bridge: 0000:00:07.0
  IO window: 6000-7fff
  MEM window: c7f00000-ceffffff
  PREFETCH window 0x00000000bc000000-0x00000000c3ffffff
PCI: Bridge: 0000:00:1c.0
  IO window: 8000-8fff
  MEM window: cf500000-cf6fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
  IO window: 9000-9fff
  MEM window: cf700000-cfffffff
  PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:05.0 to 64
PCI: Setting latency timer of device 0000:00:07.0 to 64
PCI: Setting latency timer of device 0000:31:00.0 to 64
PCI: Setting latency timer of device 0000:32:00.0 to 64
PCI: Setting latency timer of device 0000:32:01.0 to 64
PCI: Setting latency timer of device 0000:32:02.0 to 64
PCI: Setting latency timer of device 0000:35:00.0 to 64
PCI: Setting latency timer of device 0000:36:00.0 to 64
PCI: Setting latency timer of device 0000:36:01.0 to 64
PCI: Setting latency timer of device 0000:36:02.0 to 64
PCI: Setting latency timer of device 0000:36:03.0 to 64
PCI: Setting latency timer of device 0000:32:03.0 to 64
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.4 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: Bridge: 0000:80:00.0
  IO window: d000-dfff
  MEM window: f3d00000-f3efffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:80:01.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:a2:00.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:a2:01.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:a6:00.0
  IO window: e000-efff
  MEM window: f3f00000-f6ffffff
  PREFETCH window 0x00000000e8000000-0x00000000ebffffff
PCI: Bridge: 0000:a6:01.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:a6:02.0
  IO window: f000-ffff
  MEM window: f7f00000-fbffffff
  PREFETCH window 0x00000000ec000000-0x00000000efffffff
PCI: Bridge: 0000:a6:03.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:a5:00.0
  IO window: e000-ffff
  MEM window: f3f00000-fbffffff
  PREFETCH window 0x00000000e8000000-0x00000000efffffff
PCI: Bridge: 0000:a2:02.0
  IO window: e000-ffff
  MEM window: f3f00000-fbffffff
  PREFETCH window 0x00000000e8000000-0x00000000efffffff
PCI: Bridge: 0000:a2:03.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:a1:00.0
  IO window: e000-ffff
  MEM window: f3f00000-fbffffff
  PREFETCH window 0x00000000e8000000-0x00000000efffffff
PCI: Bridge: 0000:80:03.0
  IO window: e000-ffff
  MEM window: f3f00000-fbffffff
  PREFETCH window 0x00000000e8000000-0x00000000efffffff
PCI: Bridge: 0000:80:07.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:80:09.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:80:00.0 to 64
PCI: Setting latency timer of device 0000:80:01.0 to 64
PCI: Setting latency timer of device 0000:80:03.0 to 64
PCI: Setting latency timer of device 0000:a1:00.0 to 64
PCI: Setting latency timer of device 0000:a2:00.0 to 64
PCI: Setting latency timer of device 0000:a2:01.0 to 64
PCI: Setting latency timer of device 0000:a2:02.0 to 64
PCI: Setting latency timer of device 0000:a5:00.0 to 64
PCI: Setting latency timer of device 0000:a6:00.0 to 64
PCI: Setting latency timer of device 0000:a6:01.0 to 64
PCI: Setting latency timer of device 0000:a6:02.0 to 64
PCI: Setting latency timer of device 0000:a6:03.0 to 64
PCI: Setting latency timer of device 0000:a2:03.0 to 64
PCI: Setting latency timer of device 0000:80:07.0 to 64
PCI: Setting latency timer of device 0000:80:09.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
type=2000 audit(1298544768.560:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key 1DF8C62584B4E7F2
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:53:05.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:05.0 to 64
PCI: Setting latency timer of device 0000:00:07.0 to 64
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1c.4 to 64
PCI: Setting latency timer of device 0000:31:00.0 to 64
PCI: Setting latency timer of device 0000:32:00.0 to 64
PCI: Setting latency timer of device 0000:32:01.0 to 64
PCI: Setting latency timer of device 0000:32:02.0 to 64
PCI: Setting latency timer of device 0000:32:03.0 to 64
PCI: Setting latency timer of device 0000:35:00.0 to 64
PCI: Setting latency timer of device 0000:36:00.0 to 64
PCI: Setting latency timer of device 0000:36:01.0 to 64
PCI: Setting latency timer of device 0000:36:02.0 to 64
PCI: Setting latency timer of device 0000:36:03.0 to 64
PCI: Setting latency timer of device 0000:80:00.0 to 64
PCI: Setting latency timer of device 0000:80:01.0 to 64
PCI: Setting latency timer of device 0000:80:03.0 to 64
PCI: Setting latency timer of device 0000:80:07.0 to 64
PCI: Setting latency timer of device 0000:80:09.0 to 64
PCI: Setting latency timer of device 0000:a1:00.0 to 64
PCI: Setting latency timer of device 0000:a2:00.0 to 64
PCI: Setting latency timer of device 0000:a2:01.0 to 64
PCI: Setting latency timer of device 0000:a2:02.0 to 64
PCI: Setting latency timer of device 0000:a2:03.0 to 64
PCI: Setting latency timer of device 0000:a5:00.0 to 64
PCI: Setting latency timer of device 0000:a6:00.0 to 64
PCI: Setting latency timer of device 0000:a6:01.0 to 64
PCI: Setting latency timer of device 0000:a6:02.0 to 64
PCI: Setting latency timer of device 0000:a6:03.0 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [SUN   ] OemTableId [X4470   ] [20060707]
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ P001Cst] [20060707]
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: CPU1 (power states: C1[C1] C2[C2])
ACPI: CPU2 (power states: C1[C1] C2[C2])
ACPI: CPU3 (power states: C1[C1] C2[C2])
ACPI: CPU4 (power states: C1[C1] C2[C2])
ACPI: CPU5 (power states: C1[C1] C2[C2])
ACPI: CPU6 (power states: C1[C1] C2[C2])
ACPI: CPU7 (power states: C1[C1] C2[C2])
ACPI: CPU8 (power states: C1[C1] C2[C2])
ACPI: CPU9 (power states: C1[C1] C2[C2])
ACPI: CPU10 (power states: C1[C1] C2[C2])
ACPI: CPU11 (power states: C1[C1] C2[C2])
ACPI: CPU12 (power states: C1[C1] C2[C2])
ACPI: CPU13 (power states: C1[C1] C2[C2])
ACPI: CPU14 (power states: C1[C1] C2[C2])
ACPI: CPU15 (power states: C1[C1] C2[C2])
ACPI: CPU16 (power states: C1[C1] C2[C2])
ACPI: CPU17 (power states: C1[C1] C2[C2])
ACPI: CPU18 (power states: C1[C1] C2[C2])
ACPI: CPU19 (power states: C1[C1] C2[C2])
ACPI: CPU20 (power states: C1[C1] C2[C2])
ACPI: CPU21 (power states: C1[C1] C2[C2])
ACPI: CPU22 (power states: C1[C1] C2[C2])
ACPI: CPU23 (power states: C1[C1] C2[C2])
ACPI: CPU24 (power states: C1[C1] C2[C2])
ACPI: CPU25 (power states: C1[C1] C2[C2])
ACPI: CPU26 (power states: C1[C1] C2[C2])
ACPI: CPU27 (power states: C1[C1] C2[C2])
ACPI: CPU28 (power states: C1[C1] C2[C2])
ACPI: CPU29 (power states: C1[C1] C2[C2])
ACPI: CPU30 (power states: C1[C1] C2[C2])
ACPI: CPU31 (power states: C1[C1] C2[C2])
ACPI: CPU32 (power states: C1[C1] C2[C2])
ACPI: CPU33 (power states: C1[C1] C2[C2])
ACPI: CPU34 (power states: C1[C1] C2[C2])
ACPI: CPU35 (power states: C1[C1] C2[C2])
ACPI: CPU36 (power states: C1[C1] C2[C2])
ACPI: CPU37 (power states: C1[C1] C2[C2])
ACPI: CPU38 (power states: C1[C1] C2[C2])
ACPI: CPU39 (power states: C1[C1] C2[C2])
ACPI: CPU40 (power states: C1[C1] C2[C2])
ACPI: CPU41 (power states: C1[C1] C2[C2])
ACPI: CPU42 (power states: C1[C1] C2[C2])
ACPI: CPU43 (power states: C1[C1] C2[C2])
ACPI: CPU44 (power states: C1[C1] C2[C2])
ACPI: CPU45 (power states: C1[C1] C2[C2])
ACPI: CPU46 (power states: C1[C1] C2[C2])
ACPI: CPU47 (power states: C1[C1] C2[C2])
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S5)
Initalizing network drop monitor service
Freeing unused kernel memory: 212k freed
Write protecting the kernel read-only data: 505k
GSI 17 sharing vector 0x52 and IRQ 17
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 82
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 82, io mem 0xcf3fc000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
GSI 18 sharing vector 0x5A and IRQ 18
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 90
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 90, io mem 0xcf3fa000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
GSI 19 sharing vector 0x62 and IRQ 19
ACPI: PCI Interrupt 0000:00:1a.0[B] -> GSI 21 (level, low) -> IRQ 98
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 98, io base 0x00003800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-3: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 98
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 98, io base 0x00003880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-3: configuration #1 chosen from 1 choice
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 2 ports detected
GSI 20 sharing vector 0x6A and IRQ 20
ACPI: PCI Interrupt 0000:00:1a.2[D] -> GSI 20 (level, low) -> IRQ 106
PCI: Setting latency timer of device 0000:00:1a.2 to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 106, io base 0x00003c00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 90
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 90, io base 0x00003080
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 106
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 106, io base 0x00003400
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 82
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 82, io base 0x00003480
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usb 2-2: new high speed USB device using ehci_hcd and address 2
SCSI subsystem initialized
megasas: 00.00.04.17-4.31.z-RH1 Tues. June. 15 14:13:02 EST 2010
megasas: 0x1000:0x0079:0x1000:0x9263: bus 33:slot 0:func 0
GSI 21 sharing vector 0x72 and IRQ 21
ACPI: PCI Interrupt 0000:21:00.0[A] -> GSI 26 (level, low) -> IRQ 114
PCI: Setting latency timer of device 0000:21:00.0 to 64

 gen2: instance->base_addr = cf4fc000<6>megasas: FW now in Ready state
megasas_init_mfi: fw_support_ieee=0<6>scsi0 : LSI SAS based MegaRAID driver
  Vendor: HITACHI   Model: H103014SCSUN146G  Rev: A2A8
  Type:   Direct-Access                      ANSI SCSI revision: 06
  Vendor: HITACHI   Model: H103014SCSUN146G  Rev: A2A8
  Type:   Direct-Access                      ANSI SCSI revision: 06
  Vendor: HITACHI   Model: H103014SCSUN146G  Rev: A2A8
  Type:   Direct-Access                      ANSI SCSI revision: 06
  Vendor: HITACHI   Model: H103014SCSUN146G  Rev: A2A8
  Type:   Direct-Access                      ANSI SCSI revision: 06
  Vendor: LSI       Model: MR9261-8i         Rev: 2.90
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 570310656 512-byte hdwr sectors (291999 MB)
sda: Write Protect is off
sda: Mode Sense: 1f 00 00 08
SCSI device sda: drive cache: write back
SCSI device sda: 570310656 512-byte hdwr sectors (291999 MB)
sda: Write Protect is off
sda: Mode Sense: 1f 00 00 08
SCSI device sda: drive cache: write back
 sda: sda1 sda2
sd 0:2:0:0: Attached scsi disk sda
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usb 2-2: configuration #1 chosen from 1 choice
input: OEM Mass Storage plus as /class/input/input0
input: USB HID v1.11 Device [OEM Mass Storage plus] on usb-0000:00:1d.7-2
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
GSI 22 sharing vector 0x7A and IRQ 22
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 122
usb 2-3: new high speed USB device using ehci_hcd and address 3
usb 2-3: configuration #1 chosen from 1 choice
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 4 ports detected
usb 5-1: new low speed USB device using uhci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
input: American Megatrends Inc. Virtual Keyboard and Mouse as /class/input/input1
input: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-1
input: American Megatrends Inc. Virtual Keyboard and Mouse as /class/input/input2
input: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-1
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
ata1: SATA max UDMA/133 abar m2048@0xcf3f6000 port 0xcf3f6100 irq 130
ata2: SATA max UDMA/133 abar m2048@0xcf3f6000 port 0xcf3f6180 irq 130
ata3: SATA max UDMA/133 abar m2048@0xcf3f6000 port 0xcf3f6200 irq 130
ata4: SATA max UDMA/133 abar m2048@0xcf3f6000 port 0xcf3f6280 irq 130
ata5: SATA max UDMA/133 abar m2048@0xcf3f6000 port 0xcf3f6300 irq 130
ata6: SATA max UDMA/133 abar m2048@0xcf3f6000 port 0xcf3f6380 irq 130
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
Initializing USB Mass Storage driver...
scsi7 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
USB Mass Storage support registered.
  Vendor: TEAC      Model: DV-W28SS-R        Rev: 1.0C
  Type:   CD-ROM                             ANSI SCSI revision: 00
usb-storage: device scan complete
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
device-mapper: dm-raid45: initialized v0.2594l
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
type=1404 audit(1298544802.375:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
security:  3 users, 6 roles, 1951 types, 257 bools, 1 sens, 1024 cats
security:  61 classes, 77102 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1298544802.520:3): policy loaded auid=4294967295 ses=4294967295
input: PC Speaker as /class/input/input3
sd 0:2:0:0: Attached scsi generic sg0 type 0
scsi 7:0:0:0: Attached scsi generic sg1 type 5
dca service started, version 1.4
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 82
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Intel(R) Gigabit Ethernet Network Driver - version 2.1.0-k2
Copyright (c) 2007-2009 Intel Corporation.
GSI 23 sharing vector 0x8A and IRQ 23
ACPI: PCI Interrupt 0000:51:00.0[A] -> GSI 16 (level, low) -> IRQ 138
PCI: Setting latency timer of device 0000:51:00.0 to 64
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
Uniform CD-ROM driver Revision: 3.20
sr 7:0:0:0: Attached scsi CD-ROM sr0
igb 0000:51:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:51:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:21:28:af:9c:6a
igb 0000:51:00.0: eth0: PBA No: 2020ff-0ff
igb 0000:51:00.0: Using MSI-X interrupts. 4 rx queue(s), 1 tx queue(s)
ACPI: PCI Interrupt 0000:51:00.1[B] -> GSI 17 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:51:00.1 to 64
igb 0000:51:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:51:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:21:28:af:9c:6b
igb 0000:51:00.1: eth1: PBA No: 2020ff-0ff
igb 0000:51:00.1: Using MSI-X interrupts. 4 rx queue(s), 1 tx queue(s)
GSI 24 sharing vector 0x33 and IRQ 24
ACPI: PCI Interrupt 0000:81:00.0[A] -> GSI 71 (level, low) -> IRQ 51
PCI: Setting latency timer of device 0000:81:00.0 to 64
igb 0000:81:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:81:00.0: eth2: (PCIe:2.5Gb/s:Width x4) 00:21:28:af:9c:6c
igb 0000:81:00.0: eth2: PBA No: 2020ff-0ff
igb 0000:81:00.0: Using MSI-X interrupts. 4 rx queue(s), 1 tx queue(s)
GSI 25 sharing vector 0x6B and IRQ 25
ACPI: PCI Interrupt 0000:81:00.1[B] -> GSI 70 (level, low) -> IRQ 107
PCI: Setting latency timer of device 0000:81:00.1 to 64
igb 0000:81:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:81:00.1: eth3: (PCIe:2.5Gb/s:Width x4) 00:21:28:af:9c:6d
igb 0000:81:00.1: eth3: PBA No: 2020ff-0ff
igb 0000:81:00.1: Using MSI-X interrupts. 4 rx queue(s), 1 tx queue(s)
floppy0: no floppy controllers found
lp: driver loaded but no devices found
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Mapper loaded
dell-wmi: No known WMI GUID found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.5 loaded
loop: loaded (max 8 devices)
EXT3 FS on dm-0, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 34996216k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:34996216k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack
igb: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
eth1: no IPv6 routers present
nvidia: module license 'NVIDIA' taints kernel.
GSI 26 sharing vector 0xA3 and IRQ 26
ACPI: PCI Interrupt 0000:37:00.0[A] -> GSI 39 (level, low) -> IRQ 163
PCI: Setting latency timer of device 0000:37:00.0 to 64
GSI 27 sharing vector 0xAB and IRQ 27
ACPI: PCI Interrupt 0000:39:00.0[A] -> GSI 30 (level, low) -> IRQ 171
PCI: Setting latency timer of device 0000:39:00.0 to 64
GSI 28 sharing vector 0xB3 and IRQ 28
ACPI: PCI Interrupt 0000:a7:00.0[A] -> GSI 59 (level, low) -> IRQ 179
PCI: Setting latency timer of device 0000:a7:00.0 to 64
GSI 29 sharing vector 0xBB and IRQ 29
ACPI: PCI Interrupt 0000:a9:00.0[A] -> GSI 48 (level, low) -> IRQ 187
PCI: Setting latency timer of device 0000:a9:00.0 to 64
PCI: Setting latency timer of device 0000:37:00.0 to 64
PCI: Setting latency timer of device 0000:39:00.0 to 64
PCI: Setting latency timer of device 0000:a7:00.0 to 64
PCI: Setting latency timer of device 0000:a9:00.0 to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  260.19.26  Mon Nov 29 00:53:44 PST 2010

bandwidthTest:

bin/linux/release/bandwidthTest Starting...

Running on...

 Device 0: Tesla T10 Processor
 Quick Mode

 Host to Device Bandwidth, 1 Device(s), Paged memory
   Transfer Size (Bytes)        Bandwidth(MB/s)
   33554432                     1645.1

 Device to Host Bandwidth, 1 Device(s), Paged memory
   Transfer Size (Bytes)        Bandwidth(MB/s)
   33554432                     1015.2

 Device to Device Bandwidth, 1 Device(s)
   Transfer Size (Bytes)        Bandwidth(MB/s)
   33554432                     73058.0


[bandwidthTest] - Test results:
PASSED

nyilvan a device to devicet nem tudja jol merni, tul kicsi a teszt merete.

nezzuk a hw infot:

bin/linux/release/deviceQuery Starting...

 CUDA Device Query (Runtime API) version (CUDART static linking)

There are 4 devices supporting CUDA

Device 0: "Tesla T10 Processor"
  CUDA Driver Version:                           3.20
  CUDA Runtime Version:                          3.20
  CUDA Capability Major/Minor version number:    1.3
  Total amount of global memory:                 4294770688 bytes
  Multiprocessors x Cores/MP = Cores:            30 (MP) x 8 (Cores/MP) = 240 (Cores)
  Total amount of constant memory:               65536 bytes
  Total amount of shared memory per block:       16384 bytes
  Total number of registers available per block: 16384
  Warp size:                                     32
  Maximum number of threads per block:           512
  Maximum sizes of each dimension of a block:    512 x 512 x 64
  Maximum sizes of each dimension of a grid:     65535 x 65535 x 1
  Maximum memory pitch:                          2147483647 bytes
  Texture alignment:                             256 bytes
  Clock rate:                                    1.44 GHz
  Concurrent copy and execution:                 Yes
  Run time limit on kernels:                     No
  Integrated:                                    No
  Support host page-locked memory mapping:       Yes
  Compute mode:                                  Default (multiple host threads can use this device simultaneously)
  Concurrent kernel execution:                   No
  Device has ECC support enabled:                No
  Device is using TCC driver mode:               No

Device 1: "Tesla T10 Processor"
  CUDA Driver Version:                           3.20
  CUDA Runtime Version:                          3.20
  CUDA Capability Major/Minor version number:    1.3
  Total amount of global memory:                 4294770688 bytes
  Multiprocessors x Cores/MP = Cores:            30 (MP) x 8 (Cores/MP) = 240 (Cores)
  Total amount of constant memory:               65536 bytes
  Total amount of shared memory per block:       16384 bytes
  Total number of registers available per block: 16384
  Warp size:                                     32
  Maximum number of threads per block:           512
  Maximum sizes of each dimension of a block:    512 x 512 x 64
  Maximum sizes of each dimension of a grid:     65535 x 65535 x 1
  Maximum memory pitch:                          2147483647 bytes
  Texture alignment:                             256 bytes
  Clock rate:                                    1.44 GHz
  Concurrent copy and execution:                 Yes
  Run time limit on kernels:                     No
  Integrated:                                    No
  Support host page-locked memory mapping:       Yes
  Compute mode:                                  Default (multiple host threads can use this device simultaneously)
  Concurrent kernel execution:                   No
  Device has ECC support enabled:                No
  Device is using TCC driver mode:               No

Device 2: "Tesla T10 Processor"
  CUDA Driver Version:                           3.20
  CUDA Runtime Version:                          3.20
  CUDA Capability Major/Minor version number:    1.3
  Total amount of global memory:                 4294770688 bytes
  Multiprocessors x Cores/MP = Cores:            30 (MP) x 8 (Cores/MP) = 240 (Cores)
  Total amount of constant memory:               65536 bytes
  Total amount of shared memory per block:       16384 bytes
  Total number of registers available per block: 16384
  Warp size:                                     32
  Maximum number of threads per block:           512
  Maximum sizes of each dimension of a block:    512 x 512 x 64
  Maximum sizes of each dimension of a grid:     65535 x 65535 x 1
  Maximum memory pitch:                          2147483647 bytes
  Texture alignment:                             256 bytes
  Clock rate:                                    1.44 GHz
  Concurrent copy and execution:                 Yes
  Run time limit on kernels:                     No
  Integrated:                                    No
  Support host page-locked memory mapping:       Yes
  Compute mode:                                  Default (multiple host threads can use this device simultaneously)
  Concurrent kernel execution:                   No
  Device has ECC support enabled:                No
  Device is using TCC driver mode:               No

Device 3: "Tesla T10 Processor"
  CUDA Driver Version:                           3.20
  CUDA Runtime Version:                          3.20
  CUDA Capability Major/Minor version number:    1.3
  Total amount of global memory:                 4294770688 bytes
  Multiprocessors x Cores/MP = Cores:            30 (MP) x 8 (Cores/MP) = 240 (Cores)
  Total amount of constant memory:               65536 bytes
  Total amount of shared memory per block:       16384 bytes
  Total number of registers available per block: 16384
  Warp size:                                     32
  Maximum number of threads per block:           512
  Maximum sizes of each dimension of a block:    512 x 512 x 64
  Maximum sizes of each dimension of a grid:     65535 x 65535 x 1
  Maximum memory pitch:                          2147483647 bytes
  Texture alignment:                             256 bytes
  Clock rate:                                    1.44 GHz
  Concurrent copy and execution:                 Yes
  Run time limit on kernels:                     No
  Integrated:                                    No
  Support host page-locked memory mapping:       Yes
  Compute mode:                                  Default (multiple host threads can use this device simultaneously)
  Concurrent kernel execution:                   No
  Device has ECC support enabled:                No
  Device is using TCC driver mode:               No

deviceQuery, CUDA Driver = CUDART, CUDA Driver Version = 3.20, CUDA Runtime Version = 3.20, NumDevs = 4, Device = Tesla T10 Processor, Device = Tesla T10 Processor