HP Deskjet F2180-as nyomtató hibát jelez.

 ( imijoe | 2009. január 6., kedd - 10:10 )

HP Deskjet F2180-as nyomtató hibát mutat és ez ellégé zavar A hiba Device communication error. A hiba száma: 5012

hp-toolbox

HP Linux Imaging and Printing System (ver. 2.8.12)
HP Device Manager ver. 15.0

Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

error: Unable to communicate with device (code=12): hp:/usb/Deskjet_F2100_series?serial=CN79L4Q28T04TK
warning: Device not found

lsusb

Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 09da:022b A4 Tech Co., Ltd
Bus 003 Device 002: ID 0b38:0003
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 03f0:7d04 Hewlett-Packard Deskjet F2100 Printer series
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 046d:092f Logitech, Inc. QuickCam Express Plus
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

/etc/init.d/cups restart

Restarting Common Unix Printing System: cupsd.

hp-info

HP Linux Imaging and Printing System (ver. 2.8.12)
Device Information Utility ver. 5.2

Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Using device: hp:/usb/Deskjet_F2100_series?serial=CN79L4Q28T04TK

hp:/usb/Deskjet_F2100_series?serial=CN79L4Q28T04TK

error: Unable to communicate with device (code=12): hp:/usb/Deskjet_F2100_series?serial=CN79L4Q28T04TK
error: Error opening device (Device not found).
Device Parameters (dynamic data):
Parameter Value(s)
---------------------------- ----------------------------------------------------------
back-end hp
cups-printer Deskjet_F2100_series
cups-uri hp:/usb/Deskjet_F2100_series?serial=CN79L4Q28T04TK
dev-file
device-state -1
device-uri hp:/usb/Deskjet_F2100_series?serial=CN79L4Q28T04TK
deviceid
error-state 101
host
is-hp True
panel 0
panel-line1
panel-line2
port 1
scan-uri hpaio:/usb/Deskjet_F2100_series?serial=CN79L4Q28T04TK
serial CN79L4Q28T04TK
status-code 5002
status-desc

Model Parameters (static data):
Parameter Value(s)
---------------------------- ----------------------------------------------------------
align-type 5
clean-type 2
color-cal-type 0
copy-type 0
embedded-server-type 0
fax-type 0
fw-download False
icon psc_1100_series.png
io-mfp-mode 6
io-mode 1
io-support 2
job-storage 0
linefeed-cal-type 0
model Deskjet_F2100_series
model-ui HP Deskjet f2100 Series
model1 Deskjet F2120 All-in-One
model2 Deskjet F2128 All-in-One
model3 Deskjet F2140 All-in-One
model4 Deskjet F2180 All-in-One
model5 Deskjet F2187 All-in-One
model6 Deskjet F2188 All-in-One
model7 Deskjet F2179 All-in-One
model8 Deskjet F2110 All-in-One
model9 Deskjet F2185 All-in-One
monitor-type 0
panel-check-type 0
pcard-type 0
plugin 0
plugin-reason 0
power-settings 0
pq-diag-type 0
r-type 1
r0-agent1-kind 3
r0-agent1-sku 21(C9153A)
r0-agent1-type 1
r0-agent2-kind 3
r0-agent2-sku 22(C9352A)
r0-agent2-type 2
r1-agent1-kind 3
r1-agent1-sku 21(C9351A)
r1-agent1-type 1
r1-agent2-kind 3
r1-agent2-sku 22(C9352A)
r1-agent2-type 2
r2-agent1-kind 3
r2-agent1-sku 21 (C9351A)
r2-agent1-type 1
r2-agent2-kind 3
r2-agent2-sku 22 (C9352A)
r2-agent2-type 2
r3-agent1-kind 3
r3-agent1-sku 21 (C9351A)
r3-agent1-type 1
r3-agent2-kind 3
r3-agent2-sku 22 (C9352A)
r3-agent2-type 2
r4-agent1-kind 3
r4-agent1-sku 21 (C9351A)
r4-agent1-type 1
r4-agent2-kind 3
r4-agent2-sku 22 (C9352A)
r4-agent2-type 2
r5-agent1-kind 3
r5-agent1-sku 21 (C9351A)
r5-agent1-type 1
r5-agent2-kind 3
r5-agent2-sku 22 (C9352A)
r5-agent2-type 2
r6-agent1-kind 3
r6-agent1-sku 21 (C9351A)
r6-agent1-type 1
r6-agent2-kind 3
r6-agent2-sku 22 (C9352A)
r6-agent2-type 2
r7-agent1-kind 3
r7-agent1-sku 816 (C8816A/B)
r7-agent1-type 1
r7-agent2-kind 3
r7-agent2-sku 817 (C8817A/C8817G)
r7-agent2-type 2
r816-agent1-kind 3
r816-agent1-sku
r816-agent1-type 1
r816-agent2-kind 3
r816-agent2-sku
r816-agent2-type 2
scan-style 1
scan-type 1
status-battery-check 0
status-dynamic-counters 0
status-type 2
support-released True
support-type 2
support-ver 1.7.4
tech-class ['DJ3320']
tech-subclass ['Normal']
tech-type 2
usb-pid 7d04
usb-vid 03f0

Status History (most recent first):
Date/Time Code Status Description User Job ID
-------------------- ----- ---------------------------------------- -------- --------
01/06/09 08:08:17 5012 Device communication error imre 0

Done.

hp-check -t

HP Linux Imaging and Printing System (ver. 2.8.12)
Dependency/Version Check Utility ver. 14.1

Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).

Saving output in log file: hp-check.log

Initializing. Please wait...

---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux Xxxxxx-PC 2.6.26-1-686-bigmem #1 SMP Mon Dec 15 18:58:47 UTC 2008 i686 GNU/Linux

Distribution:
debian 5.0

HPOJ running?
error: Yes, HPOJ is running. HPLIP is not compatible with HPOJ. To run HPLIP, please remove HPOJ.

Checking Python version...
OK, version 2.5.2 installed

Checking PyQt 3.x version...
OK, version 3.17 installed.

Checking PyQt 4.x version...

Checking for CUPS...
Status: scheduler is running
Version: 1.3.8
error_log is set to level: warn
note: For troubleshooting printing issues, it is best to have the CUPS 'LogLevel'
note: set to 'debug'. To set the LogLevel to debug, edit the file /etc/cups/cupsd.conf (as root),
note: and change the line near the top of the file that begins with 'LogLevel' to read:
note: LogLevel debug
note: Save the file and then restart CUPS (see your OS/distro docs on how to restart CUPS).
note: Now, when you print, helpful debug information will be saved to the file:
note: /var/log/cups/error_log
note: You can monitor this file by running this command in a console/shell:
note: tail -f /var/log/cups/error_log

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0

------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).

Checking for dependency: cups - Common Unix Printing System...
OK, found.

Checking for dependency: cups-ddk - CUPS driver development kit...
OK, found.

Checking for dependency: cups-devel- Common Unix Printing System development files...
OK, found.

Checking for dependency: dbus - Message bus system...
OK, found.

Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.

Checking for dependency: libjpeg - JPEG library...
OK, found.

Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
OK, found.

Checking for dependency: libusb - USB library...
OK, found.

Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: ppdev - Parallel port support kernel module....
OK, found.

Checking for dependency: PyQt 3- Qt interface for Python (for Qt version 3.x)...
OK, found.

Checking for dependency: PyQt 4- Qt interface for Python (for Qt version 4.x)...
OK, found.

Checking for dependency: python-ctypes - A foreign function library for Python...
OK, found.

Checking for dependency: python-dbus - Python bindings for dbus...
OK, found.

Checking for dependency: python-devel - Python development files...
OK, found.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
OK, found.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.

----------------------
| HPLIP INSTALLATION |
----------------------

Currently installed HPLIP version...
HPLIP 2.8.12 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
[dirs]
run = /var/run
cupsbackend = /usr/lib/cups/backend
ppd = /usr/share/ppd/hpijs/HP
doc = /usr/share/doc/hplip-doc/HTML
drv = /usr/share/cups/drv
ppdbase = /usr/share/ppd/hpijs
home = /usr/share/hplip
icon = no
cupsfilter = /usr/lib/cups/filter

[last_used]
device_uri = hp:/usb/Deskjet_F2100_series?serial=CN79L4Q28T04TK

[hplip]
version = 2.8.12

[installation]
date_time = 01/06/09 08:39:00
version = 2.8.12.26

[configure]
foomatic-rip-hplip-install = no
qt4 = yes
doc-build = yes
qt3 = yes
cups11-build = no
gui-build = yes
internal-tag = 2.8.12.26
foomatic-ppd-install = no
network-build = yes
ui-toolkit = qt3
pp-build = yes
fax-build = yes
scanner-build = yes
restricted-build = no
dbus-build = yes
shadow-build = no
foomatic-drv-install = yes

Current contents of '~/.hplip/hplip.conf' file:
[last_used]
device_uri = hp:/usb/Deskjet_F2100_series?serial=CN79L4Q28T04TK

-------------------------------
| DISCOVERED PARALLEL DEVICES |
-------------------------------

No devices found.

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

Device URI Model
-------------------------------- -----------------------
hp:/usb/Deskjet_F2100_series?ser HP Deskjet F2100 series
ial=CN79L4Q28T04TK

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

Deskjet_F2100_series
--------------------
Type: Printer
Installed in HPLIP?: Yes, using the hp: CUPS backend.
Device URI: hp:/usb/Deskjet_F2100_series?serial=CN79L4Q28T04TK
PPD: /etc/cups/ppd/Deskjet_F2100_series.ppd
PPD Description: HP Deskjet f2100 series Foomatic/hpijs, hpijs 2.8.10
Printer status: printer Deskjet_F2100_series is idle. enabled since 2008. dec. 29., hétfő, 20.50.40 CET
Communication status: Good

----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
error: Not found. SANE backend 'hpaio' NOT properly setup (needs to be added to /etc/sane.d/dll.conf).

Checking output of 'scanimage -L'...
device `v4l:/dev/video0' is a Noname Logitech QuickCam EC virtual device
device `hpaio:/usb/Deskjet_F2100_series?serial=CN79L4Q28T04TK' is a Hewlett-Packard Deskjet_F2100_series all-in-one
device `hpoj:mlc:usb:Deskjet_F2100_series' is a HP Deskjet F2100 series multi-function peripheral

---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.

-----------------
| USB I/O SETUP |
-----------------

Checking for permissions of USB attached printers...

HP Device 0x7d04 at 002:003:
Device URI: hp:/usb/Deskjet_F2100_series?serial=CN79L4Q28T04TK
Device node: /dev/bus/usb/002/003
Mode: 0664

-----------
| SUMMARY |
-----------

error: 2 errors and/or warnings.

Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html

Done.

A nyomtató tehát jó, csak a hiba üzenete zavar ,meg az ,hogy nem tudom megnézni a tintapatronok állapotát. A nyomtató ahogy a címben írtam is
HP Deskjet F2180-as.