A Prometric/Linux Professional Institute egyesítik erőiket

Címkék

Hogyan legyünk certifikált, vizsgázott Linux emberek?

A fórumban érdeklődött valaki arról, hogy milyen Linux képzés van ma nálunk itthon. Mondtam neki, hogy elég siralmas, hiszen nekem is végig kellett volna járni a megfelelő iskolát, és nemzetközileg elfogadott vizsgát kellett volna tennem a szakmai képesítésem megszerzéséhez, de közben több akadályba is ütköztem. Hát ez magyarországon nem egyszerű dolog. A Linux oktatásban egyetlen általam ismert nemzetközileg elismert szervezet tart vizsgákat. Ez az LPI, azaz a Linux Professional Institute. Nekik van két részből álló vizsgájuk, az LPI101, és az LPI102 névre hallgató vizsga. Az első az általános Linux ismeretket vizsgálja, mint a parancsok, sed, awk, általános "boldogulást" a linux világában. A 102-es jelzésű pedig már a "komolyabb" linux ismereteket foglalja magában. Ha valaki ilyen vizsgán szeretné magát megmérettetni, akkor annak van lehetősége Magyarországon is vizsgázni. Ez nem volt mindig így. Nem írom ide a vizsgaközpont nevét, nem akarok reklámozni. Akit érdekel a dolog az dobjon nekem egy mailt, és megírom neki, hol is lehet vizsgázni.

Ez az egész honnan jutott eszembe? Onnan, hogy a vizsgák úgy zajlanak, hogy be kell jelentkezni a vizsgaközpontba, ott adnak egy időpontot. Az időpontra a vizsgaközpont dolgozói letöltik a külföldi szerverről a vizsga témáját, azt bizonyos idő alatt meg kell oldani, majd a kész vizsgát visszaküldik. És rövid időn belül megérkezik az értékelés. A vizsgát a Prometric cégen keresztül végzik, aki vizsgázott már ilyen renszerben az tudja miről van szó. Most a Prometric és az LPI bejelentette, hogy 20$ kedvezményt adnak a vizsga díjából. Most érdemes elmenni vizsgázni.

Bejelentés

LPI.org

Prometric

Hozzászólások

Na ez pont nem ilyen, ez kimondottan általános linux ismereteket taglal. A kérdések nem nehezek, de oda kell figyelni. A vizsgára kb. 1 óra van. A kérdések száma 13-14 ha jól emlékszem. Ez nem hit kérdése, van magyarországon olyan rendszermérnöki képzés, ahol ennek a vizsgának a megléte alapkövetelmény.... Nekem van anyagom a felkészüléshez ha valakinek kellene, de papír formájában, majd megpróbálom valahogy elekronikus formába önteni....

-------------------------------------------------------------------

LPI Sample Questions: Test 101


OBJECTIVE: 1.3.1 TYPE: mc

If you wanted to turn off mail notification, what command would you use?

1. biff n

2. mesg n

3. mesg off

4. notify off

5. set notify=off

OBJECTIVE: 1.3.1 TYPE: mcma

Which of these commands could you use to show one page of output at a time?

1. more

2. less

3. sed

4. pause

5. grep

OBJECTIVE: 1.3.3 TYPE: mcma

Which commands will give you information about how much disk space each file in the current directory uses?

1. ls -l

2. ls -la

3. du .

4. ls -a

5. ls

OBJECTIVE: 1.3.4 TYPE: mc

What command would send the output of cmd1 to the input of cmd2?

1. cmd1 | cmd2

2. cmd1 || cmd2

3. cmd1 && cmd2

4. cmd1 ; cmd2

5. cmd1 cmd2

OBJECTIVE: 1.3.5 TYPE: mc

Under the bash shell, when a command is running, pressing control-Z will usually

1. suspend the foreground task.

2. adds an EOF to the file.

3. kill the command running in the foreground

4. move the foreground task into the background

5. log the user off

OBJECTIVE: 1.8.1 TYPE: mc

What is the 'man' command used for?

1. to display information about the syntax for a command

2. it is the replacement for the 'boy' command

3. it is a standard alias to 'ls -la | more'

4. it is used to display formatted html pages

OBJECTIVE: 2.11.1 TYPE: fitb

In which file might you find the following entry: root:x:0:0::/root:/bin/bash

1. /etc/passwd

OBJECTIVE: 2.11.1 TYPE: fitb

As root, what command would you type to initiate a password change for user larry?

1. passwd larry

OBJECTIVE: 2.11.2 TYPE: mc

Under the bash shell which is the most appropriate place to set environment variables that apply to all users?

1. /etc/profile

2. rc.local

3. rc.sysinit

4. /etc/skel

5. /etc/bashrc

OBJECTIVE: 2.11.4 TYPE: mc

Which statement describes the cron daemon?

1. Manages scheduling of routine system tasks

2. Manages all incoming connections and spawns off child processes

3. Is responsible for file sharing across a network

4. Manages the printing subsystem

5. Keeps track of system messages and errors

OBJECTIVE: 2.4.1 TYPE: mcma

Which of the following are valid block devices on most default linux distributions?

1. hard disks

2. loopback devices

3. serial ports

4. virtual terminals

5. tape devices

OBJECTIVE: 2.4.2 TYPE: mc

How can you best see how much free space you have in your current directory?

1. Use df .

2. Use df

3. Use du /

4. Use du .

5. Use df /

OBJECTIVE: 2.4.5 TYPE: fitb

Which command would you use to alter the permissions of a file (do not give any parameters)

1. chmod

OBJECTIVE: 2.4.8 TYPE: mc

Which command will update the slocate database as a background process?

1. updatedb &

2. slocate --updatedb &

3. slocatedb

4. slocate --start &

5. slocate --update &

OBJECTIVE: 2.6.2 TYPE: mc

Having booted into run level 3, how would you change to run level 5 without rebooting?

1. telinit 5

2. startx

3. run 5

4. ALT-F7-5

5. setinit 5

LPI Sample Questions: Test 102

OBJECTIVE: 1.1.1 TYPE: mc

which command is used to change settings on IDE hard disk drives?

1. hdparm

2. hddparm

3. diskparm

4. hdparam

5. ideconfig

OBJECTIVE: 1.12.1 TYPE: mc

Your logfile shows repeated connections to TCP port 143. Which named service is being accessed?

1. imap

2. smbd

3. nmbd

4. pop2

5. smtp

OBJECTIVE: 1.12.1 TYPE: fitb

What type of packet does an IP ping use (provide acronym)?

1. ICMP

OBJECTIVE: 1.12.2 TYPE: mc

To learn more about the management of an internet site the best utility to use would be:

1. whois

2. traceroute

3. ping

4. telnet

5. rpcdump

OBJECTIVE: 1.12.3 TYPE: mc

If you had a Linux system routing 3 different Networks through 3 NICs and you were having trouble with your IP-Forwarding. Where would you look to ensure that IP-Forwarding is actually enabled?

1. cat /proc/sys/net/ipv4/ip_forward

2. netstat

3. cat /proc/net/tcp

4. iptraf -d eth0

5. tail -f /var/log/messages

OBJECTIVE: 1.13.1 TYPE: mc

What file is used for associating port numbers to port names.

1. /etc/services

2. /etc/hosts

3. /etc/inetd.conf

4. /etc/securetty

5. /etc/ports

OBJECTIVE: 1.13.4 TYPE: mc

You want to make the directory /local available via NFS. All users on your local network should be allowed to read and write files. Which of the following is correct, assuming that your local network is 192.168.1.0, and your machine is part of the DNS domain foobar.com?

1. /local 192.168.1.0/255.255.255.0(rw)

2. /local *.com(rw)

3. 192.168.1.0 /local

4. /local 192.168.1.0(rw)

OBJECTIVE: 1.14.1 TYPE: fitb

Which file can you create to prevent non-root users from logging into the system? (specify path and filename)

1. /etc/nologin

OBJECTIVE: 1.14.2 TYPE: fitb

What command can be used to display a formatted output of the wtmp file? (no arguments)

1. last

OBJECTIVE: 1.14.3 TYPE: fitb

Which command can be executed by a user who is already logged into the system, in order to change to the root user? (type the command without any parameters)

1. su

OBJECTIVE: 1.7.2 TYPE: mc

To cause a particular print job to be printed next, regardless of its current position in the queue, what command would be used?

1. lpc topq

2. lpc -t

3. lpq -t

4. lpq --next

5. lpc move

OBJECTIVE: 1.7.2 TYPE: mc

Which statement describes the LPD daemon?

1. Manages the printing subsystem

2. Manages all incoming connections and spawns off child processes

3. Is responsible for file sharing across a network

4. Manages scheduling of routine system tasks

5. Keeps track of system messages and errors

OBJECTIVE: 2.10.4 TYPE: mc

When configuring a terminal for X what does the -fn switch do?

1. It sets the font size and or type for the terminal.

2. It sets the terminal's default function.

3. It places the terminal in the foreground on your screen.

4. It sets the terminal's initial value to false.

5. It sets the terminal's initial display to reverse video.

OBJECTIVE: 2.2.1 TYPE: mc

What command(s) do you use to create swap space?

1. mkswap

2. activeswap

3. swapon

4. initswap

5. mkfs -t swap

OBJECTIVE: 2.2.3 TYPE: fitb

Type the full command you could use to decompress the file "foo.gz"

1. gzip -d foo.gz

2. gunzip -d foo.gz

3. gunzip foo.gz

4. unzip foo.gz

5. decompress foo.gz

OBJECTIVE: 2.2.5 TYPE: mc

How can you add package information from a file Packages to the database of available Debian packages?

1. dpkg --merge-avail Packages

2. dpkg --update-avail Packages

3. dpkg --record-avail Packages

4. dpkg -U Packages

OBJECTIVE: 2.2.6 TYPE: mc

You need to find out which package owns a file called /etc/paper.config. Which command will answer this question?

1. rpm -qf /etc/paper.config

2. rpm -qa|grep /etc/paper.config

3. rpm -Fq /etc/paper.config

4. rpm -q /etc/paper.config

5. rpm --requires /etc/paper.config

Szép szó a certifikált, de a hitelesített még szebb! :>