D-Link D-323 vs. ICY-BOX NAS4220

Szia,

Nekem DNS-323-am van, ha tudsz forasztani akkor kb. fél óra alatt összeüthető hozzá egy soros port átalakító, ezek után debian !!! simán telepíthető rá, innentől igazából azt csinálsz vele amit akarsz, Gigabites port samba-n, vagy FTP-n keresztül teljesen jól elérhető.

Nekem 2db 500-as HDD megy benne soft Raid 1-ben, korrektül.

dns323:~# dmesg
Linux version 2.6.12.6-arm1 (jack@SWTEST2) (gcc version 3.3.3) #29 Thu Dec 27 09:59:48 CST 2007
CPU: ARM926EJ-Sid(wb) [41069260] revision 0 (ARMv5TEJ)
CPU0: D VIVT write-back cache
CPU0: I cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets
CPU0: D cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets
Machine: MV-88fxx81
Using UBoot passing parameters structure
Sys Clk = 166000000, Tclk = 166000000

- Warning - This LSP release was tested only with U-Boot release 1.7.3

Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 16384
DMA zone: 16384 pages, LIFO batch:7
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=/dev/ram console=ttyS0,115200 :::DB88FXX81:egiga0:none
PID hash table entries: 512 (order: 9, 8192 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 64MB 0MB 0MB 0MB = 64MB total
Memory: 60544KB available (2466K code, 454K data, 112K init)
Calibrating delay loop... 331.77 BogoMIPS (lpj=1658880)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 1194K
NET: Registered protocol family 16

Marvell Development Board (LSP Version 1.7.6_NAS)-- RD-88F5181-88SX7042-2xSATA

Detected Tclk 166000000 and SysClk 166000000
Marvell USB EHCI Host controller #0: c03a5bc0
pexBarOverlapDetect: winNum 2 overlap current 0
mvPexInit:Warning :Bar 2 size is illigal
it will be disabled
please check Pex and CPU windows configuration
PCI: bus0: Fast back to back transfers disabled
PCI: bus1: Fast back to back transfers enabled
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
cesadev_init(c0012498)
Fast Floating Point Emulator V0.9 (c) Peter Teichmann.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing disabled
ttyS0 at MMIO 0x0 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler deadline registered
RAMDISK driver initialized: 16 RAM disks of 10240K size 1024 blocksize
loop: loaded (max 8 devices)
Marvell Gigabit Ethernet Driver 'egiga':
o Ethernet descriptors in DRAM
o DRAM SW cache-coherency
o Checksum offload enabled
o Loading network interface 'egiga0'
scsi0 : Marvell SCSI to SATA adapter
scsi1 : Marvell SCSI to SATA adapter
scsi2 : Marvell SCSI to SATA adapter
scsi3 : Marvell SCSI to SATA adapter
Vendor: WDC Model: WD5000AAKS-00A7B Rev: 01.0
Type: Direct-Access ANSI SCSI revision: 03
Vendor: WDC Model: WD5000AAKS-00A7B Rev: 01.0
Type: Direct-Access ANSI SCSI revision: 03
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0
physmap flash device: 800000 at ff800000
phys_mapped_flash: Found 1 x16 devices at 0x0 in 8-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cmdlinepart partition parsing not available
RedBoot partition parsing not available
Using physmap partition definition
Creating 5 MTD partitions on "phys_mapped_flash":
0x00000000-0x00010000 : "MTD1"
0x00010000-0x00020000 : "MTD2"
0x00020000-0x001a0000 : "Linux Kernel"
0x001a0000-0x007d0000 : "File System"
0x007d0000-0x00800000 : "u-boot"
ehci_platform ehci_platform.20865: EHCI Host Controller
ehci_platform ehci_platform.20865: new USB bus registered, assigned bus number 1
ehci_platform ehci_platform.20865: irq 17, io mem 0x00000000
ehci_platform ehci_platform.20865: park 0
ehci_platform ehci_platform.20865: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
mice: PS/2 mouse device common for all mice
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
NET: Registered protocol family 1
NET: Registered protocol family 17
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 112K
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2 sdb3
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
md: md0 stopped.
md: bind
md: bind
raid1: raid set md0 active with 2 out of 2 mirrors
md: md1 stopped.
md: bind
md: bind
raid1: raid set md1 active with 2 out of 2 mirrors
kjournald starting. Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Adding 530104k swap on /dev/sda1. Priority:-1 extents:1
Adding 530104k swap on /dev/sdb1. Priority:-2 extents:1
EXT3 FS on md0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on md1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
egiga0: link up<5>, full duplex<5>, speed 100 Mbps<5>
dns323:~# cat /etc/issue
Debian GNU/Linux 4.0 \n \l

dns323:~# cat /proc/cpu
cpu/ cpuinfo
dns323:~# cat /proc/cpuinfo
Processor : ARM926EJ-Sid(wb) rev 0 (v5l)
BogoMIPS : 331.77
Features : swp half thumb fastmult edsp java
CPU implementer : 0x41
CPU architecture: 5TEJ
CPU variant : 0x0
CPU part : 0x926
CPU revision : 0
Cache type : write-back
Cache clean : cp15 c7 ops
Cache lockdown : format C
Cache format : Harvard
I size : 32768
I assoc : 1
I line length : 32
I sets : 1024
D size : 32768
D assoc : 1
D line length : 32
D sets : 1024

Hardware : MV-88fxx81
Revision : 0000
Serial : 0000000000000000
dns323:~# free
total used free shared buffers cached
Mem: 61948 22268 39680 0 4840 8252
-/+ buffers/cache: 9176 52772
Swap: 1060208 0 1060208
dns323:~#

dns323:~# hdparm -t /dev/md1

/dev/md1:
Timing buffered disk reads: 74 MB in 3.04 seconds = 24.34 MB/sec