Samsung SSD 840 Pro

Minap ránéztem az SSD-re, és a következőt láttam:

https://drive.google.com/file/d/0ByNdCm6X3ueCN294WWdpWHFVQ00/view?usp=sharing

Kérdésem, hogy kinek mi a véleménye?
Túl sűrűn használom, hamar el fog kopni, ha idő előtt (garancia) elkopik fogják-e nekem cserélni?
Ha jól emlékszem idén július óta van.

Hozzászólások

Ha nem lenne egy a színes, szagos bohócruha (Merevlemez Őrszem), hanem egy egyszerű SMART diag kimenet, még talán valami értelmeset is lehetne mondani.

--
trey @ gépház

Teljesen jogos! :)
Remélem így kicsit többet tudok mutatni:

smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model: Samsung SSD 840 PRO Series
Serial Number: S1ATNSAF180806B
LU WWN Device Id: 5 002538 5a01aec0e
Firmware Version: DXM05B0Q
User Capacity: 256.060.514.304 bytes [256 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4c
Local Time is: Wed Dec 3 12:06:08 2014 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (53956) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 20) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1265
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 944
177 Wear_Leveling_Count 0x0013 098 098 000 Pre-fail Always - 38
179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0
181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0
183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0032 070 053 000 Old_age Always - 30
195 Hardware_ECC_Recovered 0x001a 200 200 000 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
235 Unknown_Attribute 0x0012 099 099 000 Old_age Always - 50
241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 10119874153

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
255 0 65535 Read_scanning was never started
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

KisSzikra - TTZ Modding Csoport

Na nézzük:

http://www.samsung.com/global/business/semiconductor/minisite/SSD/us/ht…

"ID # 177 Wear Leveling Count

This attribute represents the number of media program and erase operations (the number of times a block has been erased). This value is directly related to the lifetime of the SSD. The raw value of this attribute shows the total count of P/E Cycles."

A Pro MLC-s. Az MLC-k (függően a gyártástechnológiától) 3000-5000 P/E ciklust bírnak (a TLC-k nagyjából 1000-et, az SLC-k 100 ezret). Te most 38-nál tartasz. 3000-rel számolva az kb. 98%-os (ezt írta az őrszem is).

Nem hiszem, hogy szarnod kéne ettől.

--
trey @ gépház

A 240gb-s ocz vertex 3-asom a drivedx szerint 57.1%-os, 11.2 terát írtam már rá, 8884 órát volt eddig használva trim nélkül és még mindig nem vettem észre semmi lassulást.

Lol @sok írás.

Én fél év alatt legalább 200 P/E cycle-t tettem bele. Melós gép, sokat fordítok rajta, amúgy a written LBAs nem magas, de a sok kis fájl miatt a write amplification 10x-es.
A jenkins slave-eink alatt az SSD-k kb 3 hónap alatt 600 cycle-t szedtek össze. Na EZ sok írás, nem a félév alatt 38.
---
Régóta vágyok én, az androidok mezonkincsére már!