Block eszköz target kiajánlása Fiber Channelen keresztül és Windows 2012R2/Ubuntu initiatorok

Adott egy Ubuntu Server 14.04-es amiben van egy 81:00.0 Fibre Channel: QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI Express HBA (rev 03)
FC kártya.
A kártya optikai kábele egy FC SAN switchbe kötve majd egy másik porton egy másik géphez vezetve. A SAN switchen jelenleg ez a két gép össze van zónázva, azonban a initiator oldalon sehogy nem tudom láthatóvá tenni az FC-n megosztott block eszközt. Próbáltam Linux és Windows alatt is.

Target oldalon ez van beállítva a targetcli segítségével:
/> status
Status for /:
/> ls
o- / ........................................................................................................ [...]
o- backstores ............................................................................................. [...]
| o- fileio .................................................................................. [0 Storage Object]
| o- iblock .................................................................................. [1 Storage Object]
| | o- testdisc ...................................................................... [/dev/main/test activated]
| o- pscsi ................................................................................... [0 Storage Object]
| o- rd_dr ................................................................................... [0 Storage Object]
| o- rd_mcp .................................................................................. [0 Storage Object]
o- ib_srpt .......................................................................................... [0 Targets]
o- iscsi ............................................................................................ [0 Targets]
o- loopback ......................................................................................... [0 Targets]
o- qla2xxx ........................................................................................... [1 Target]
| o- 21:00:00:1b:32:83:67:88 .......................................................................... [enabled]
| o- acls ............................................................................................ [4 ACLs]
| | o- 21:00:00:24:ff:4a:fe:fe ................................................................. [1 Mapped LUN]
| | | o- mapped_lun0 .............................................................................. [lun0 (rw)]
| | o- 21:00:00:24:ff:4a:fe:ff ................................................................. [1 Mapped LUN]
| | | o- mapped_lun0 .............................................................................. [lun0 (rw)]
| | o- 21:00:00:24:ff:4b:01:88 ................................................................. [1 Mapped LUN]
| | | o- mapped_lun0 .............................................................................. [lun0 (rw)]
| | o- 21:00:00:24:ff:4b:01:89 ................................................................. [1 Mapped LUN]
| | o- mapped_lun0 .............................................................................. [lun0 (rw)]
| o- luns ............................................................................................. [1 LUN]
| o- lun0 ................................................................ [iblock/testdisc (/dev/main/test)]
o- tcm_fc ........................................................................................... [0 Targets]

A másik (initiator) oldalon ez a kártya van:
81:00.0 Fibre Channel: QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI Express HBA (rev 03)
De csak ez látszik:
rescan-scsi-bus
/sbin/rescan-scsi-bus: line 592: [: 1.13: integer expression expected
Host adapter 0 (megaraid_sas) found.
Host adapter 1 (qla2xxx) found.
Host adapter 2 (qla2xxx) found.
Host adapter 3 (iscsi_tcp) found.
Scanning SCSI subsystem for new devices
Scanning host 0 for SCSI target IDs 0 1 2 3 4 5 6 7, all LUNs
Scanning for device 0 2 0 0 ...
OLD: Host: scsi0 Channel: 02 Id: 00 Lun: 00
Vendor: LSI Model: MR9271-8i Rev: 3.24
Type: Direct-Access ANSI SCSI revision: 05
Scanning for device 0 2 1 0 ...
OLD: Host: scsi0 Channel: 02 Id: 01 Lun: 00
Vendor: LSI Model: MR9271-8i Rev: 3.24
Type: Direct-Access ANSI SCSI revision: 05
Scanning host 1 for all SCSI target IDs, all LUNs
Scanning host 2 for all SCSI target IDs, all LUNs
Scanning host 3 for SCSI target IDs 0 1 2 3 4 5 6 7, all LUNs
Scanning for device 3 0 0 0 ...
OLD: Host: scsi3 Channel: 00 Id: 00 Lun: 00
Vendor: IET Model: Controller Rev: 0001
Type: RAID ANSI SCSI revision: 05
Scanning for device 3 0 0 1 ...
OLD: Host: scsi3 Channel: 00 Id: 00 Lun: 01
Vendor: IET Model: VIRTUAL-DISK Rev: 0001
Type: Direct-Access ANSI SCSI revision: 05
0 new device(s) found.
0 device(s) removed.

Mi az amit kihagytam, nem jól csináltam? Vagy mi lehet a baj? Ubuntu Server és Windows alatt mivel tudnám működésre bírni? Előre is köszönöm!