FreeBSD 6.2
EPIA C3/800, 20GB, 128MB, USR(3Com) 56k FaxModem (serial)
Guglizva más is tapasztalta a $Subject hibát (kiemelve, hogy VIA chipsetnél, de ez vagy 2 éves post volt)
Külön érdekesség, hogy a gépeken (merthogy 2 van) korábban CentOS 4.4 volt, és gyönyörűen ment a 4.3.2-es Hylafax.
Aztán egy (meggondolatlan) yum -y update 4.5-é varázsolta, és gyakorlatilag bexart, s öntötte a hibaüzenetet: modem on /dev/ttyS0 appears wedged
---CentOS:err
The HylaFAX software thinks that there is a problem with the modem
on device /dev/ttyS0 that needs attention; repeated attempts to
initialize the modem have failed.
Consult the server trace logs for more information on what is happening.
You will be notified again after 5 minutes if the problem persists.
---CentOS:err
Hylafax upgrade 4.4.1-re hatástalan.
Na, gondoltam adok annak a .... Linuxnak, lássuk a FreeBSD-t.
faxaddmodem a következő hibát adja:
---FreeBSD:err
Probing for best speed to talk to modem: 38400 OK.
Terminated
About fax classes:
The difference between fax classes has to do with how HylaFAX interacts
with the modem and the fax protocol features that are used when sending
or receiving faxes. One class isn't inherently better than another;
however, one probably will suit a user's needs better than others.
Class 1 relies on HylaFAX to perform the bulk of the fax protocol.
Class 2 relies on the modem to perform the bulk of the fax protocol.
Class 2.0 is similar to Class 2 but may include more features.
Class 1.0 is similar to Class 1 but may add V.34-fax capability.
Class 2.1 is similar to Class 2.0 but adds V.34-fax capability.
HylaFAX generally will have more features when using Class 1/1.0 than
when using most modems' Class 2 or Class 2.0 implementations. Generally
any problems encountered in Class 1/1.0 can be resolved by modifications
to HylaFAX, but usually any problems encountered in Class 2/2.0/2.1 will
require the modem manufacturer to resolve it.
If you're unsure and your modem supports it, use Class 1.
This modem looks to have support for Class 1 and 2.0.
How should it be configured [1]?
Hmm, something seems to be hung, check your modem eh?
Hmm, something seems to be hung, check your modem eh?
LOOP forever :((
---FreeBSD:err
2 modem telefonközpont mögött nem szokott bexarni 1xre
Valaki már belefutott ebbe?
Ha igen, mi volt a megoldás?
Ja, cu -l cuad0-al vígan lehet bizgerálni a modemeket.
- 1820 megtekintés