Otthoni hálózat

Hálózatok egyéb

Helló a segítségeteket szeretném kérni a következőben:
-otthon akarok kétgépes hálózatot kialakítani
-mindkét gépben Realtek 10/100 Ethernet lan kártya van
-mindkét os: Debian Lenny
1.gép: IP:192.168.1.100
NM:255.255.255.0
2.gép: IP:192.168.1.150
NM:255.255.255.0

A két kártya működik, a modulok be vannak töltve, a hálókábel is jó de a gépek mégsem látják egymást:
ping 192.168.1.150
PING 192.168.1.150 (192.168.1.150) 56(84) bytes of data.
From 192.168.1.100 icmp_seq=2 Destination Host Unreachable
From 192.168.1.100 icmp_seq=3 Destination Host Unreachable
From 192.168.1.100 icmp_seq=4 Destination Host Unreachable

--- 192.168.1.150 ping statistics ---
6 packets transmitted, 0 received, +3 errors, 100% packet loss, time 5000ms
, pipe 3
================================================================================
root:~# lsmod
Module Size Used by
ppp_deflate 8448 0
bsd_comp 8832 0
sha1 6272 0
arc4 5760 0
ppp_mppe 9348 0
ppp_async 12032 1
ppp_generic 25108 8 ppp_deflate,bsd_comp,ppp_mppe,ppp_async
slhc 9472 1 ppp_generic
crc_ccitt 5888 1 ppp_async
ipv6 220704 14
loop 15880 0
fuse 34952 0
capability 7304 0
commoncap 9088 1 capability
floppy 54852 0
snd_pcm_oss 37280 0
snd_mixer_oss 18048 1 snd_pcm_oss
snd_cmipci 31904 1
gameport 14600 1 snd_cmipci
snd_pcm 71300 2 snd_pcm_oss,snd_cmipci
snd_page_alloc 11144 1 snd_pcm
snd_opl3_lib 11904 1 snd_cmipci
snd_timer 21636 2 snd_pcm,snd_opl3_lib
snd_hwdep 10372 1 snd_opl3_lib
snd_mpu401_uart 9600 1 snd_cmipci
nvidiafb 53532 0
snd_rawmidi 21664 1 snd_mpu401_uart
snd_seq_device 9996 2 snd_opl3_lib,snd_rawmidi
snd 44260 12 snd_pcm_oss,snd_mixer_oss,snd_cmipci,snd_pcm,snd_opl3_lib,snd_timer,snd_hwdep,snd_mpu401_uart,snd_rawmidi,snd_seq_device
parport_pc 36548 1
ppdev 10628 0
rivafb 49424 0
8139cp 20352 0
8139too 25216 0
mii 8320 2 8139cp,8139too
psmouse 36232 0
ide_cd 36612 0
lp 12452 0
i2c_algo_bit 11272 2 nvidiafb,rivafb
vgastate 11264 1 rivafb
serio_raw 9220 0
i8xx_tco 9624 0
soundcore 10848 1 snd
8250_pnp 12416 0
parport 32584 3 parport_pc,ppdev,lp
8250 23652 4 8250_pnp
serial_core 19456 1 8250
binfmt_misc 12296 1
raid6 102416 0
raid5 30976 0
xor 17160 2 raid6,raid5
raid1 21248 0
raid0 10624 0
multipath 10368 0
linear 8448 0
md_mod 64916 6 raid6,raid5,raid1,raid0,multipath,linear
sata_vsc 9476 0
sata_via 9732 0
sata_sx4 14468 0
sata_svw 9348 0
sata_sis 9092 0
sata_sil 10632 0
sata_promise 12292 0
sata_nv 10244 0
ata_piix 12676 0
libata 57996 9 sata_vsc,sata_via,sata_sx4,sata_svw,sata_sis,sata_sil,sata_promise,sata_nv,ata_piix
sr_mod 17188 0
cdrom 36512 2 ide_cd,sr_mod
sd_mod 19328 0
scsi_mod 113416 3 libata,sr_mod,sd_mod
uhci_hcd 22284 0
usbcore 103936 2 uhci_hcd
shpchp 34080 0
pci_hotplug 27196 1 shpchp
i2c_i801 11148 0
i2c_core 19072 4 nvidiafb,rivafb,i2c_algo_bit,i2c_i801
==============================================================================
root:~# modinfo 8139cp
filename: /lib/modules/2.6.17.6-10/kernel/drivers/net/8139cp.ko
author: Jeff Garzik
description: RealTek RTL-8139C+ series 10/100 PCI Ethernet driver
version: 1.2
license: GPL
vermagic: 2.6.17.6-10 SMP mod_unload 586 REGPARM gcc-3.4
depends: mii
alias: pci:v000010ECd00008139sv*sd*bc*sc*i*
alias: pci:v00000357d0000000Asv*sd*bc*sc*i*
srcversion: 3F569CDD65DBD6EBC3D1EE7
parm: multicast_filter_limit:8139cp: maximum number of filtered multicast addresses (int)
parm: debug:8139cp: bitmapped message enable number (int)
root:~# modinfo 8139too
filename: /lib/modules/2.6.17.6-10/kernel/drivers/net/8139too.ko
author: Jeff Garzik
description: RealTek RTL-8139 Fast Ethernet driver
license: GPL
version: 0.9.27
vermagic: 2.6.17.6-10 SMP mod_unload 586 REGPARM gcc-3.4
depends: mii
alias: pci:v000010ECd00008139sv*sd*bc*sc*i*
alias: pci:v000010ECd00008138sv*sd*bc*sc*i*
alias: pci:v00001113d00001211sv*sd*bc*sc*i*
alias: pci:v00001500d00001360sv*sd*bc*sc*i*
alias: pci:v00004033d00001360sv*sd*bc*sc*i*
alias: pci:v00001186d00001300sv*sd*bc*sc*i*
alias: pci:v00001186d00001340sv*sd*bc*sc*i*
alias: pci:v000013D1d0000AB06sv*sd*bc*sc*i*
alias: pci:v00001259d0000A117sv*sd*bc*sc*i*
alias: pci:v00001259d0000A11Esv*sd*bc*sc*i*
alias: pci:v000014EAd0000AB06sv*sd*bc*sc*i*
alias: pci:v000014EAd0000AB07sv*sd*bc*sc*i*
alias: pci:v000011DBd00001234sv*sd*bc*sc*i*
alias: pci:v00001432d00009130sv*sd*bc*sc*i*
alias: pci:v000002ACd00001012sv*sd*bc*sc*i*
alias: pci:v0000018Ad00000106sv*sd*bc*sc*i*
alias: pci:v0000126Cd00001211sv*sd*bc*sc*i*
alias: pci:v00001743d00008139sv*sd*bc*sc*i*
alias: pci:v0000021Bd00008139sv*sd*bc*sc*i*
alias: pci:v000010ECd00008129sv*sd*bc*sc*i*
alias: pci:v*d00008139sv000010ECsd00008139bc*sc*i*
alias: pci:v*d00008139sv00001186sd00001300bc*sc*i*
alias: pci:v*d00008139sv000013D1sd0000AB06bc*sc*i*
srcversion: 4B66389FB9192131EA6EA60
parm: debug:8139too bitmapped message enable number (int)
parm: full_duplex:8139too: Force full duplex for board(s) (1) (array of int)
parm: media:8139too: Bits 4+9: force full duplex, bit 5: 100Mbps (array of int)
parm: multicast_filter_limit:8139too maximum number of filtered multicast addresses (int)
===============================================================================
ifconfig:
eth0 Link encap:Ethernet HWaddr 00:19:E0:0B:09:E0
inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:11 Base address:0x8000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:91 errors:0 dropped:0 overruns:0 frame:0
TX packets:91 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:8080 (7.8 Kb) TX bytes:8080 (7.8 Kb)
=============================================================================
root:~# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 * 255.255.255.255 UH 0 0 0 eth0
192.168.1.0 * 255.255.255.0 U 0 0 0 eth0

Kérem aki tud segítsen, én már sajnos kifogytam az ötletekből!

( pinyo_villany | 2007. 07. 12., cs – 22:41 )

ifconfig eth0 pointopoint ip

man ifconfig 


[-]pointopoint [addr]
              This keyword enables the point-to-point mode  of  an  interface,
              meaning  that  it  is  a  direct  link between two machines with
              nobody else listening on it.
              If the address argument is also given, set the protocol  address
              of  the  other  side of the link, just like the obsolete dstaddr
              keyword does.  Otherwise, set or clear the IFF_POINTOPOINT  flag
              for the interface.

Nekem mindig igazam van, ha nem, akkor nincs igazam, szoval megint igazam van hogy nincs igazam.

debian 4.0 - linux-2.6.22-pancs1-wifi0 - 2.6.22 kernel madwifivel itt

( kisbetu v | 2007. 07. 12., cs – 23:47 )

" a hálókábel is jó de a gépek mégsem látják egymást"

Krosszkábel?
A link LED-ek világítanak?

( leszkoven | 2007. 07. 13., p – 00:42 )

/etc/hosts ?

--
Nem azt mondom, hogy Bill Gates a Sátán! Csak azt, hogy ha Bill találkozna a Sátánnal, nem lennének nyelvi problémáik!

( szunyog | 2007. 07. 13., p – 10:40 )

Hasonló jelenség nálam is jelentkezik (igaz ubuntu alatt).
Nálam az az ok, hogy a 2 gépben lévő háló kártya esetenként nem tud megegyezni azon, hogy milyen paraméterekkel kommunikáljank. Esetleg nézd meg milyen beállításokkal próbálnak beszélgetni (mii-diag eth0).