Kubuntu 10.10 KDM probléma?

Ubuntu Linux

Sziasztok!

A következő problémába ütköztem, a Kdm bejelentkezés után elindul a kde, majd néhány másodperc után vissza dob a KDM bejelentkező képernyőhöz. Nem tudom mi lehet a probléma oka. Próbáltam volna az x.conf-ot szerkeszteni de nincs x.conf az /etc/X11/ könyvtárba valakinek valami ötlete van?

  • 1487 megtekintés

( nanto | 2010. 12. 24., p – 13:36 )

nano /etc/X11/xorg.conf.d/10-evdev.conf ?
vagy uyg egyaltalan mi az output az ls /etc/X11/xorg.conf.d/ -re?

Xorg 1.7-ben volt utoljara /etc/X11/xorg.conf ugyanis (es nem x.conf), azota igy van megoldva

Ehhez jon hozza, hogy ha a kdm utan nem jelentkezik be, de van grafikus felulet, akkor az valoszinuleg inkabb a KDE problemaja lesz (pl. apt-get install kdebase-workspace)

meg egy cat /var/log/Xorg.*.log esetleg? (ott ha nincs EE vagy WW akkor tuti nem Xorg related, bar en egyebkent is biztos vagyok benne, hogy ez nem Xorg fail, inkabb hianyos KDE telepitesnek tunik)

Nekem az /usr/share/X11/xorg.conf.d/ van ennek tartalma:
-rw-r--r-- 1 root root 1099 2010-09-16 19:47 10-evdev.conf
-rw-r--r-- 1 root root 171 2010-09-23 04:20 50-synaptics.conf
-rw-r--r-- 1 root root 115 2010-08-09 23:36 50-vmmouse.conf
-rw-r--r-- 1 root root 817 2010-08-10 01:04 50-wacom.conf
-rw-r--r-- 1 root root 622 2010-09-23 04:20 51-synaptics-quirks.conf
-rw-r--r-- 1 root root 125 2010-09-16 11:33 60-magictrackpad.conf

az apt-get install kdebase-workspace azt mondja, hogy már a legújabb verzió.

A /var/log/Xorg.0.log tartalma:

[ 543.363] (II) Open ACPI successful (/var/run/acpid.socket)
[ 543.465] (II) Power Button: Device reopened after 1 attempts.
[ 543.465] (II) Power Button: Device reopened after 1 attempts.
[ 543.465] (II) bttv IR (card=34): Device reopened after 1 attempts.
[ 543.465] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
[ 543.465] (II) ImExPS/2 Generic Explorer Mouse: Device reopened after 1 attempts.
[ 547.199] (II) Power Button: Close
[ 547.199] (II) UnloadModule: "evdev"
[ 547.199] (II) Power Button: Close
[ 547.199] (II) UnloadModule: "evdev"
[ 547.199] (II) bttv IR (card=34): Close
[ 547.199] (II) UnloadModule: "evdev"
[ 547.199] (II) AT Translated Set 2 keyboard: Close
[ 547.199] (II) UnloadModule: "evdev"
[ 547.199] (II) ImExPS/2 Generic Explorer Mouse: Close
[ 547.199] (II) UnloadModule: "evdev"
[ 547.272] -1 XSELINUXs still allocated at reset
[ 547.272] SCREEN: 0 objects of 136 bytes = 0 total bytes 0 private allocs
[ 547.272] COLORMAP: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[ 547.272] DEVICE: 0 objects of 16 bytes = 0 total bytes 0 private allocs
[ 547.272] CLIENT: 0 objects of 168 bytes = 0 total bytes 0 private allocs
[ 547.272] WINDOW: 0 objects of 32 bytes = 0 total bytes 0 private allocs
[ 547.272] PIXMAP: 1 objects of 40 bytes = 40 total bytes 0 private allocs
[ 547.272] GC: 0 objects of 92 bytes = 0 total bytes 0 private allocs
[ 547.272] CURSOR: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[ 547.272] CURSOR_BITS: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[ 547.272] DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs
[ 547.272] PICTURE: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[ 547.272] TOTAL: 1 objects, 40 bytes, 0 allocs
[ 547.272] -2 SELECTIONs still allocated at reset
[ 547.272] WINDOW: 0 objects of 32 bytes = 0 total bytes 0 private allocs
[ 547.272] PIXMAP: 1 objects of 40 bytes = 40 total bytes 0 private allocs
[ 547.272] GC: 0 objects of 92 bytes = 0 total bytes 0 private allocs
[ 547.272] CURSOR: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[ 547.272] CURSOR_BITS: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[ 547.272] DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs
[ 547.272] PICTURE: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[ 547.272] TOTAL: 1 objects, 40 bytes, 0 allocs
[ 547.272] 1 PIXMAPs still allocated at reset
[ 547.272] PIXMAP: 1 objects of 40 bytes = 40 total bytes 0 private allocs
[ 547.272] GC: 0 objects of 92 bytes = 0 total bytes 0 private allocs
[ 547.272] CURSOR: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[ 547.272] CURSOR_BITS: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[ 547.272] DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs
[ 547.272] PICTURE: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[ 547.272] TOTAL: 1 objects, 40 bytes, 0 allocs
[ 547.274] (II) Open ACPI successful (/var/run/acpid.socket)
[ 547.274] (II) APM registered successfully
[ 547.450] (==) NV(0): DPMS enabled
[ 547.450] (==) RandR enabled
[ 547.464] (II) AIGLX: Screen 0 is not DRI2 capable
[ 547.464] (II) AIGLX: Screen 0 is not DRI capable
[ 547.466] (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
[ 547.466] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 547.515] (II) XKB: reuse xkmfile /var/lib/xkb/server-02D8252E59564A234380F1E5417646A9DB3B7452.xkm
[ 547.527] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 547.528] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 547.528] (**) Power Button: always reports core events
[ 547.528] (**) Power Button: Device: "/dev/input/event1"
[ 547.528] (II) Power Button: Found keys
[ 547.528] (II) Power Button: Configuring as keyboard
[ 547.528] (**) Option "xkb_rules" "evdev"
[ 547.528] (**) Option "xkb_model" "pc105"
[ 547.528] (**) Option "xkb_layout" "hu"
[ 547.528] (**) Option "xkb_variant" "standard"
[ 547.528] (**) Option "xkb_options" "lv3:ralt_switch"
[ 547.531] (II) XKB: reuse xkmfile /var/lib/xkb/server-3950180AB55915A7A91ADD2FF10425E973280245.xkm
[ 547.534] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 547.534] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 547.534] (**) Power Button: always reports core events
[ 547.534] (**) Power Button: Device: "/dev/input/event0"
[ 547.534] (II) Power Button: Found keys
[ 547.534] (II) Power Button: Configuring as keyboard
[ 547.534] (**) Option "xkb_rules" "evdev"
[ 547.534] (**) Option "xkb_model" "pc105"
[ 547.534] (**) Option "xkb_layout" "hu"
[ 547.534] (**) Option "xkb_variant" "standard"
[ 547.534] (**) Option "xkb_options" "lv3:ralt_switch"
[ 547.543] (II) config/udev: Adding input device bttv IR (card=34) (/dev/input/event4)
[ 547.543] (**) bttv IR (card=34): Applying InputClass "evdev keyboard catchall"
[ 547.543] (**) bttv IR (card=34): always reports core events
[ 547.543] (**) bttv IR (card=34): Device: "/dev/input/event4"
[ 547.544] (II) bttv IR (card=34): Found keys
[ 547.544] (II) bttv IR (card=34): Configuring as keyboard
[ 547.544] (**) Option "xkb_rules" "evdev"
[ 547.544] (**) Option "xkb_model" "pc105"
[ 547.544] (**) Option "xkb_layout" "hu"
[ 547.544] (**) Option "xkb_variant" "standard"
[ 547.544] (**) Option "xkb_options" "lv3:ralt_switch"
[ 547.547] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[ 547.547] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 547.547] (**) AT Translated Set 2 keyboard: always reports core events
[ 547.547] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[ 547.547] (II) AT Translated Set 2 keyboard: Found keys
[ 547.547] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 547.547] (**) Option "xkb_rules" "evdev"
[ 547.547] (**) Option "xkb_model" "pc105"
[ 547.547] (**) Option "xkb_layout" "hu"
[ 547.547] (**) Option "xkb_variant" "standard"
[ 547.547] (**) Option "xkb_options" "lv3:ralt_switch"
[ 547.548] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event3)
[ 547.548] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
[ 547.548] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[ 547.548] (**) ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event3"
[ 547.548] (II) ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
[ 547.548] (II) ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
[ 547.548] (II) ImExPS/2 Generic Explorer Mouse: Found relative axes
[ 547.548] (II) ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
[ 547.548] (II) ImExPS/2 Generic Explorer Mouse: Configuring as mouse
[ 547.548] (**) ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
[ 547.548] (**) ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 547.548] (II) ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
[ 547.548] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse0)
[ 547.548] (II) No input driver/identifier specified (ignoring)

A /var/log/Xorg.failsave.log tartalma:

[ 30.517]
[ 30.517] (II) VESA(0): Total Memory: 2048 64KB banks (131072kB)
[ 30.517] (II) VESA(0): Configured Monitor: Using hsync range of 31.50-15.62 kHz
[ 30.517] (II) VESA(0): Configured Monitor: Using vrefresh range of 56.00-57.03 Hz
[ 30.517] (WW) VESA(0): Unable to estimate virtual size
[ 30.517] (II) VESA(0): Not using built-in mode "800x600" (no mode of this name)
[ 30.517] (II) VESA(0): Not using built-in mode "640x480" (no mode of this name)
[ 30.517] (II) VESA(0): Not using built-in mode "640x400" (no mode of this name)
[ 30.517] (II) VESA(0): Not using built-in mode "320x400" (no mode of this name)
[ 30.517] (II) VESA(0): Not using built-in mode "320x240" (no mode of this name)
[ 30.517] (II) VESA(0): Not using built-in mode "320x200" (no mode of this name)
[ 30.517] (WW) VESA(0): No valid modes left. Trying less strict filter...
[ 30.517] (II) VESA(0): Configured Monitor: Using hsync range of 31.50-15.62 kHz
[ 30.517] (II) VESA(0): Configured Monitor: Using vrefresh range of 56.00-57.03 Hz
[ 30.517] (WW) VESA(0): Unable to estimate virtual size
[ 30.517] (II) VESA(0): Not using built-in mode "800x600" (hsync out of range)
[ 30.517] (II) VESA(0): Not using built-in mode "640x480" (hsync out of range)
[ 30.517] (II) VESA(0): Not using built-in mode "640x400" (hsync out of range)
[ 30.517] (II) VESA(0): Not using built-in mode "320x400" (hsync out of range)
[ 30.517] (II) VESA(0): Not using built-in mode "320x240" (illegal horizontal timings)
[ 30.517] (II) VESA(0): Not using built-in mode "320x200" (illegal horizontal timings)
[ 30.517] (WW) VESA(0): No valid modes left. Trying aggressive sync range...
[ 30.517] (II) VESA(0): Configured Monitor: Using hsync range of 31.50-15.62 kHz
[ 30.517] (II) VESA(0): Configured Monitor: Using vrefresh range of 50.00-57.03 Hz
[ 30.517] (WW) VESA(0): Unable to estimate virtual size
[ 30.517] (II) VESA(0): Not using built-in mode "800x600" (hsync out of range)
[ 30.517] (II) VESA(0): Not using built-in mode "640x480" (hsync out of range)
[ 30.517] (II) VESA(0): Not using built-in mode "640x400" (hsync out of range)
[ 30.517] (II) VESA(0): Not using built-in mode "320x400" (hsync out of range)
[ 30.517] (II) VESA(0): Not using built-in mode "320x240" (illegal horizontal timings)
[ 30.517] (II) VESA(0): Not using built-in mode "320x200" (illegal horizontal timings)
[ 30.517] (EE) VESA(0): No valid modes
[ 30.517] (II) UnloadModule: "vesa"
[ 30.517] (II) UnloadModule: "int10"
[ 30.517] (II) Unloading /usr/lib/xorg/modules/libint10.so
[ 30.517] (II) UnloadModule: "vbe"
[ 30.517] (II) Unloading /usr/lib/xorg/modules/libvbe.so
[ 30.517] (EE) Screen(s) found, but none have a usable configuration.
[ 30.517]
Fatal server error:
[ 30.518] no screens found
[ 30.518]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 30.518] Please also check the log file at "/var/log/Xorg.failsafe.log" for additional information.
[ 30.518]
[ 30.528] ddxSigGiveUp: Closing log

Csak azt nem érten, hogy kb. 2 hónapja telepítettem eddig működött most meg miért nem működik :(

atyauristen, miert nem lehet Ubuntueknal valami ugy, mint miden mas mukodo distroban (nalam tok mas van a /usr/share/X11-ben, de a config fileoknak eleg regota a /etc-ben a helye) :/ A Vesa driver megintcsak sokat elarul, a minimum az, hogy egy ilyen felhasznalobarat distronak magatol fel kellene ismernie (maskepp nem akkor lspci-bol grep-elt szkriptbol) az idealis videodrivert. Amit meg probalj meg: uj user letrehozasa, KDE elindit vele, vagy .kde backupolasa es kitorlese es ugy inditanij KDE-t a jelenlegi userrel.

A distrocseret mar nem is merem javasolni, de igazabol itt az lenne a helyes lepes

Ennek ellenere egy normalis mukodes erdekeben javasolnek egy Xorg -configure -t majd a megfelelo konfig fajlok /etc/X11/xorg.conf.d-be dobasat, jelenlegi config file-ok torleset, bar el nem tudom kepzelni mi kefelodhetett el ennyire. Azert a no valid resolution eleg brutalis hibauzenet Xorg logban, egyertelmu, hogy valami. el lett kefelve, amikor a distro legutobb bekonfigolta az X-et

szerk: https://wiki.archlinux.org/index.php/Xorg#Configuring ez alapjan csinald meg a 10-monitor.conf -ot (nekem erre nicns szuksegem mondjuk). Elso korben az is eleg, ha mindent kitorolsz a xorg.conf.d-bol es kezded az egeszet a 0rol