UHU 1.2 Sil 3112 probléma

Kakil az egészre csak az intel SATA vezérlője konfigurálható a SIL3112 vagy enabled vagy disabled egy w2k-is fellöktem gyorsan az a driver után simán használja a cuccokat a drága kis UHU-m nem ez már kezd idegesíten egyébként máshol is csak hümmögés volt a válasz lehet hogy SuSe 9.2 a megoldás?

Na jó nem hagyom magam szerintetek hogyan mondjam meg a kis aranyosnak hogy a SATA vezérlőn ott ül 2db optikai egység és én használni szeretném őket .
Hol tudom megnézni hogy a vezérlőt (Sil3112) egyátalán látja-e az UHU?

Még az sem segített hogy az automountak próbáltam becsatolni az eszközöket, vajon van-e megoldás?

Köszi a sok hepit mind sokat segített .......

Ma délben meg fogom nézni ha mégsem menne így kétségbeesetten fogom keresni a segítséget , azért köszi az eddigieket

Itt a kimente bocsánat a kissé idegbeteg hangért de már nagyon írnék cd-t így meg csak netezgetni tudok

Linux version 2.6.9-19 (uhubuild@bobek) (gcc version 3.3.4) #1 SMP Thu Jan 27 08:52:43 CET 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f5d10
On node 0 totalpages: 262128
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 32752 pages, LIFO batch:7
DMI 2.2 present.
ACPI: RSDP (v000 IntelR ) @ 0x000f95e0
ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff7a40
ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: root=/dev/hda3 lang=hu
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 3008.693 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1028312k/1048512k available (3245k kernel code, 19440k reserved, 1442k data, 292k init, 131008k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 5963.77 BogoMIPS (lpj=2981888)
Security Scaffold v1.0.0 initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 0000441d 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
tbxface-0117 [02] acpi_load_tables : ACPI Tables successfully acquired
Parsing all Control Methods:..........................................................................................................................................................................
Table [DSDT](id F004) - 585 Objects with 57 Devices 170 Methods 34 Regions
ACPI Namespace successfully loaded at root c062e3a0
evxfevnt-0093 [03] acpi_enable : Transition to ACPI mode successful
CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
per-CPU timeslice cutoff: 2926.21 usecs.
task migration cache decay timeout: 3 msecs.
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay loop... 5226.49 BogoMIPS (lpj=2613248)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 0000441d 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
Total of 2 processors activated (11190.27 BogoMIPS).
Enabling IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 3916k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfb720, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20041105
evgpeblk-0979 [06] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-0987 [06] ev_create_gpe_block : Found 9 Wake, Enabled 1 Runtime GPEsin this block
Completing Region/Field/Buffer/Package initialization:............................................................................
Initialized 34/34 Regions 9/9 Fields 21/21 Buffers 12/17 Packages (594 nodes)
Executing all Device _STA and_INI methods:..............................................................
62 Devices found containing: 62 _STA, 2 _INI methods
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: Power Resource [PFAN] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185
ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 201
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 201
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 21 (level, low) -> IRQ 209
ACPI: PCI interrupt 0000:02:06.0[A] -> GSI 22 (level, low) -> IRQ 217
TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca)
gx-suspmod: error: no MediaGX/Geode processor found!
Starting balanced_irq
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.21-WIP [Flags: R/W].
EFS: 1.0a - http://aeschi.ch.eu.org/efs/
JFFS version 1.0, (C) 1999, 2000 Axis Communications AB
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
QNX4 filesystem 0.2.3 registered.
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
BeFS version: 0.9.3
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
inotify init: minor=63
ACPI: PS/2 Keyboard Controller [PS2K] at I/O 0x60, 0x64, irq 1
serio: i8042 KBD port at 0x60,0x64 irq 1
RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
divert: not allocating divert_blk for non-ethernet device imq0
divert: not allocating divert_blk for non-ethernet device imq1
IMQ starting with 2 devices...
IMQ driver loaded successfully.
Hooking IMQ before NAT on PREROUTING.
Hooking IMQ after NAT on POSTROUTING.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: Maxtor 6Y160P0, ATA DISK drive
hdb: Maxtor 6Y080L0, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: Maxtor 6Y080L0, ATA DISK drive
hdd: TEAC DV-W58G, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
SiI680: IDE controller at PCI slot 0000:02:05.0
ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 21 (level, low) -> IRQ 209
SiI680: chipset revision 2
SiI680: BASE CLOCK == 133
SiI680: 100% native mode on irq 209
ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio
ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio
Probing IDE interface ide2...
hdf: IC35L060AVVA07-0, ATA DISK drive
ide2 at 0xf8802080-0xf8802087,0xf880208a on irq 209
Probing IDE interface ide3...
Probing IDE interface ide3...
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 1024KiB
hda: 312581808 sectors (160041 MB) w/7936KiB Cache, CHS=19457/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
hdb: max request size: 128KiB
hdb: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hdb: cache flushes supported
hdb: hdb1 hdb2
hdc: max request size: 128KiB
hdc: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hdc: cache flushes supported
hdc: hdc1
hdf: max request size: 64KiB
hdf: 120103200 sectors (61492 MB) w/1863KiB Cache, CHS=65535/16/63, UDMA(100)
hdf: cache flushes supported
hdf: hdf1
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
EISA: Probing bus 0 at eisa0
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
ACPI: (supports S0 S1 S4 S5)
ACPI wakeup devices:
PCI0 CSAD HUB0 UAR1 USB0 USB1 USB2 USB3 USBE MODM
RAMDISK: squashfs filesystem found at block 0
RAMDISK: Loading 3916KiB [1 disk] into ram disk... done.
VFS: Mounted root (squashfs filesystem) readonly.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
ehci_hcd 0000:00:1d.7: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 193, pci mem f8806000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
SCSI subsystem initialized
libata version 1.02 loaded.
sata_sil version 0.54
ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 177
ata1: SATA max UDMA/100 cmd 0xF88D4080 ctl 0xF88D408A bmdma 0xF88D4000 irq 177
ata2: SATA max UDMA/100 cmd 0xF88D40C0 ctl 0xF88D40CA bmdma 0xF88D4008 irq 177
ata1: dev 0 cfg 49:0b00 82:4218 83:4000 84:4000 85:4218 86:0000 87:4000 88:0007
ata1: dev 0 ATAPI, max UDMA/33
ata1: dev 0 configured for UDMA/33
scsi0 : sata_sil
ata2: dev 0 cfg 49:0b00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0007
ata2: dev 0 ATAPI, max UDMA/33
ata2: dev 0 configured for UDMA/33
scsi1 : sata_sil
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
uhci_hcd 0000:00:1d.0: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 169, io base 0000cc00
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
uhci_hcd 0000:00:1d.1: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 177, io base 0000c000
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
uhci_hcd 0000:00:1d.2: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 185, io base 0000c400
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 169
uhci_hcd 0000:00:1d.3: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: irq 169, io base 0000c800
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: linear personality registered as nr 1
md: multipath personality registered as nr 7
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
raid5: automatically using best checksumming function: pIII_sse
pIII_sse : 4820.000 MB/sec
raid5: using function: pIII_sse (4820.000 MB/sec)
md: raid5 personality registered as nr 4
raid6: int32x1 808 MB/s
raid6: int32x2 785 MB/s
raid6: int32x4 703 MB/s
raid6: int32x8 679 MB/s
raid6: mmxx1 1847 MB/s
raid6: mmxx2 2125 MB/s
raid6: sse1x1 1062 MB/s
raid6: sse1x2 1195 MB/s
raid6: sse2x1 1660 MB/s
raid6: sse2x2 1800 MB/s
raid6: using algorithm sse2x2 (1800 MB/s)
md: raid6 personality registered as nr 8
usb 3-1: new low speed USB device using address 2
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 292k freed
Adding 2104504k swap on /dev/hda2. Priority:-1 extents:1
EXT3 FS on hda3, internal journal
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
microcode: No suitable data for CPU0
microcode: No suitable data for CPU1
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
8139cp: pci dev 0000:02:06.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp: Try the "8139too" driver instead.
8139too Fast Ethernet driver 0.9.27
ACPI: PCI interrupt 0000:02:06.0[A] -> GSI 22 (level, low) -> IRQ 217
divert: allocating divert_blk for eth0
eth0: RealTek RTL8139 at 0xf88d6000, 00:4f:4e:60:b2:6c, IRQ 217
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
hw_random: RNG not detected
ichxrom ichxrom_init_one(): Unable to register resource 0xff000000-0xffffffff -kernel bug?
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
CFI: Found no ichxrom device at location zero
JEDEC: Found no ichxrom device at location zero
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel i875 Chipset.
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: AGP aperture is 256M @ 0xd0000000
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7167 Fri Feb 25 09:08:22 PST 2005
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 50269 usecs
intel8x0: clocking to 48000
ACPI: Power Button (FF) [PWRF]
ACPI: Fan [FAN] (off)
ibm_acpi: ec object not found
acpi_thermal-0377 [07] acpi_thermal_get_trip_: Invalid passive threshold
ACPI: Thermal Zone [THRM] (49 C)
hdd: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
st: Version 20040403, fixed bufsize 32768, s/g segs 256
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
lp: driver loaded but no devices found
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
lp0: using parport0 (polling).
inserting floppy driver for 2.6.9-19
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
input: PC Speaker
Real Time Clock Driver v1.12
loop: loaded (max 8 devices)
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
Capability LSM initialized
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ieee1394: Initialized config rom entry `ip1394'
ieee1394: Loaded CMP driver
ieee1394: Loaded AMDTP driver
ieee1394: raw1394: /dev/raw1394 device initialized
video1394: Installed video1394 module
sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
input: USB HID v1.10 Mouse [A4Tech RF USB Mouse] on usb-0000:00:1d.1-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
eth0: link up, 10Mbps, half-duplex, lpa 0x0000
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0500500(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
divert: not allocating divert_blk for non-ethernet device ppp0
NET: Registered protocol family 17
Supermount version 2.0.4 for kernel 2.6
NTFS volume version 3.1.
NTFS volume version 3.1.
NTFS volume version 3.1.
NTFS volume version 3.1.
NTFS volume version 3.1.
NTFS volume version 3.1.
NTFS volume version 3.1.
NTFS volume version 3.1.
eth0: no IPv6 routers present
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode

Hát ez az a Sil680 nem SATA vezérlő hanem egy RAID kártya 4db UDMA 133 vezérlővel ezen van mobilrackaban a 60 GB IBM vinyó
A két eszköz : HL-DT-ST CD-RW GCE-8480B cdíró és az 120s pioneer dvd olvasó az ABIT IC7-G Sil 3112-es SATA vezérlőjén ül amit gondolom scsi-nek kellen látni :
Nem ez az:
scsi0 : sata_sil
ata2: dev 0 cfg 49:0b00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0007
ata2: dev 0 ATAPI, max UDMA/33
ata2: dev 0 configured for UDMA/33
scsi1 : sata_sil
de itt csak egy cucc van

Hali mindenkinek a következő kis gondom lenne, eddig egy Abit NF7-s
(CPU AMD 3200+) használtam a Sil3112-es vezérlőn volt egy cdíró és egy DVD olvasó amit már a BETA2-es UHU is simán kezelt, most váltottam platformot az alaplap egy ABit IC7-G (CPU P4 Prescott HT 3 GHz) amelynek ugyanaz a SATA vezérlője, a drága 1.2 ugyan felismeri a vezérlőt és a két rajta csücsülő eszközt, a HAL -ban legalább is látszik azt írja "Device Type: Unknow" mind a két csatornára ezt mondja, az NF7-S -en kiírta azt eszközök tipusát, tudom tudom most mindenki azt mondja hogy dugjam át az ICH5R -déli hídra a két cuccot.
Sajna van egy OEM vinfos XP-m amit játékra használok (Total War Rome meg egy csomó stratégia) és a kis drága akkora hátast dob a déli hídra kötött két optikai eszköztől hogy a durranás pestig hallatszik.

Tehát drága linux társak meg tudja mondani valaki hogyan lehet életet lehelni a két optika cuccba Egy Pioneer DVD olvasó és egy LG cd író,
az UHU nem rakja be a /media könyvtárba és sem a K3B sem az XCDroast nem találja meg nagyon kellen a helpi mert nem tudok így cd írni meg DVD nézni, a telepítés egy pluszban rádugott cd olvasóról történt.

Le vagyok döbbenve ...
A videókártyám egy ABIT FX5900 OTES az előző rendszerben az AMD prockóval a glxgears 10500 körüli fps-t produkált, most a szuper procival HT-vel nem éri el a 9000-et ez elég gáz nem?

Vay az is lehet hogy az a baj hogy a legújabb nvidia drivert használom az AMD gép az eggyel ezelőttivel ment

Szóval csak magát a tényt furcsállom hogy az fps érték kissebb lett az ablak egyébként olyan méretű volt amit a parancs magától kirajzol, az UHU egyébként felismert a HT-s procit?

A sata cuccokat még az RC2 UHU is szépen detektálta bár ottaz USB rádiós egér nem működött
egyébként a /meda könyvtáram így néz ki:

file:/media/.dev
file:/media/cdrom
file:/media/disk-hda1-Windows_XP-SP2_Thomek
file:/media/floppy

a rejtett /.dev pedg így:
file:/media/.dev/cdrom
file:/media/.dev/cdwriter
file:/media/.dev/dvd
file:/media/.dev/fd0
file:/media/.dev/hda1

itt látható a többi optika cucc csaj nem tudom őket becsatolni vajon hogyan kell?

Az ABIT IC7-G -n csak annyit lehet állítani a Sil 3112 Sata vezérlőn hogy RAID legyen vagy sem természtesen most a RAID rom le van titva, de mondom az NF7-S el mindem símán ment ott bármit kötötten a sata-ra az UHU tudta használni