MicroSD Huawei E169modemmel Ubuntu 9.04 nem ismeri fel

Fórumok

Hello,

Egy hónapos kezdőként eddig minden kérdésre megtaláltam a választ a fórumokon, de az alábbira sajnos se magyarul, se angolul nem találtam választ.

MicroSD-t szereztem be a Huawei E169-es modememhez. A modem tökéletesen működik, de a MicroSD-t Ubuntu 9.04 alól meghajtóként nem látom. (Windows alól tökéletesen fut). Tehát ubuntu alól se a fájlokhoz nem férek hozzá, ami a microSD-n van, se nem tudok rá adatot írni.

Próbáltam netbookról is, Ubuntu 9.04 remix alól hiába.

Megoldási javaslatokat előre is köszönöm!

Hozzászólások

Szóval, ez a modem kártyaolvasó is egyben, jól értem? Ha igen, lehet, hogy le van tiltva az auto csatolás, illetve lehet, hogy át van kapcsolva az eszköz modem módba, azért nem csatolja.
Kéne egy dmesg kimenet, az sokat segítene ;)

<= Powered By Ubuntu & Gentoo Linux =>

'Software is like sex: It's better when it's free!'
By Linus Torvalds

PcZolee, nagyon szépen köszönöm a válaszod!
dmesg lásd lejjebb
Addig is néhány kérdés:
Hogyan lehet aktivizálni az auto csatolást?
Megoldható, hogy a modem funkció és a kártyaolvasás párhuzamosan fusson egymással?

x0-0xff), disabling
[ 0.589764] pnp 00:08: io resource (0x65-0x65) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
[ 0.589767] pnp 00:08: io resource (0x72-0x77) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
[ 0.589770] pnp 00:08: io resource (0x90-0x9f) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
[ 0.589774] pnp 00:08: io resource (0xa4-0xa5) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
[ 0.589777] pnp 00:08: io resource (0xa8-0xa9) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
[ 0.589780] pnp 00:08: io resource (0xac-0xad) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
[ 0.589783] pnp 00:08: io resource (0xb0-0xb5) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
[ 0.589786] pnp 00:08: io resource (0xb8-0xb9) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
[ 0.589789] pnp 00:08: io resource (0xbc-0xbd) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
[ 0.589792] pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
[ 0.589797] pnp 00:08: io resource (0x10-0x1f) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
[ 0.589800] pnp 00:08: io resource (0x24-0x25) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
[ 0.589803] pnp 00:08: io resource (0x28-0x29) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
[ 0.589806] pnp 00:08: io resource (0x2c-0x2d) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
[ 0.589809] pnp 00:08: io resource (0x30-0x31) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
[ 0.589812] pnp 00:08: io resource (0x34-0x35) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
[ 0.589815] pnp 00:08: io resource (0x38-0x39) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
[ 0.589818] pnp 00:08: io resource (0x3c-0x3d) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
[ 0.589826] pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.589829] pnp 00:08: io resource (0x62-0x62) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.589831] pnp 00:08: io resource (0x66-0x66) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.589834] pnp 00:08: io resource (0x80-0x80) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.589837] pnp 00:08: io resource (0x84-0x86) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.589840] pnp 00:08: io resource (0x88-0x88) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.589843] pnp 00:08: io resource (0x8c-0x8e) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.589846] pnp 00:08: io resource (0xe0-0xef) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.589850] pnp 00:08: io resource (0x10-0x1f) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.589853] pnp 00:08: io resource (0x24-0x25) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.589856] pnp 00:08: io resource (0x28-0x29) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.589859] pnp 00:08: io resource (0x2c-0x2d) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.589862] pnp 00:08: io resource (0x30-0x31) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.589865] pnp 00:08: io resource (0x34-0x35) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.589868] pnp 00:08: io resource (0x38-0x39) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.589871] pnp 00:08: io resource (0x3c-0x3d) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.589874] pnp 00:08: io resource (0x50-0x53) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.589877] pnp 00:08: io resource (0x63-0x63) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.589880] pnp 00:08: io resource (0x65-0x65) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.589884] pnp 00:08: io resource (0x72-0x77) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.589887] pnp 00:08: io resource (0x90-0x9f) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.589890] pnp 00:08: io resource (0xa4-0xa5) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.589893] pnp 00:08: io resource (0xa8-0xa9) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.589896] pnp 00:08: io resource (0xac-0xad) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.589899] pnp 00:08: io resource (0xb0-0xb5) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.589902] pnp 00:08: io resource (0xb8-0xb9) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.589905] pnp 00:08: io resource (0xbc-0xbd) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[ 0.589908] pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[ 0.589911] pnp 00:08: io resource (0x62-0x62) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[ 0.589914] pnp 00:08: io resource (0x66-0x66) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[ 0.589919] pnp 00:08: io resource (0x10-0x1f) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[ 0.589922] pnp 00:08: io resource (0x24-0x25) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[ 0.589925] pnp 00:08: io resource (0x28-0x29) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[ 0.589928] pnp 00:08: io resource (0x2c-0x2d) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[ 0.589931] pnp 00:08: io resource (0x30-0x31) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[ 0.589934] pnp 00:08: io resource (0x34-0x35) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[ 0.589937] pnp 00:08: io resource (0x38-0x39) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[ 0.589940] pnp 00:08: io resource (0x3c-0x3d) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[ 0.589943] pnp 00:08: io resource (0x50-0x53) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[ 0.589946] pnp 00:08: io resource (0x63-0x63) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[ 0.589949] pnp 00:08: io resource (0x65-0x65) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[ 0.589952] pnp 00:08: io resource (0x72-0x77) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[ 0.591982] pnp: PnP ACPI: found 10 devices
[ 0.592019] ACPI: ACPI bus type pnp unregistered
[ 0.592025] PnPBIOS: Disabled by ACPI PNP
[ 0.592055] system 00:00: iomem range 0x1ef40000-0x1ef4ffff could not be reserved
[ 0.592058] system 00:00: iomem range 0x1ef50000-0x1effffff has been reserved
[ 0.592062] system 00:00: iomem range 0xfec10000-0xfec1ffff has been reserved
[ 0.592065] system 00:00: iomem range 0xfeda0000-0xfedbffff has been reserved
[ 0.592068] system 00:00: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.592071] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.592074] system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.592077] system 00:00: iomem range 0xffe80000-0xffffffff has been reserved
[ 0.592093] system 00:08: ioport range 0x1e0-0x1ef has been reserved
[ 0.592096] system 00:08: ioport range 0x480-0x48f has been reserved
[ 0.592099] system 00:08: ioport range 0x680-0x6ff has been reserved
[ 0.592102] system 00:08: ioport range 0x800-0x80f has been reserved
[ 0.592105] system 00:08: ioport range 0xd800-0xd87f has been reserved
[ 0.592108] system 00:08: ioport range 0xd880-0xd89f has been reserved
[ 0.592110] system 00:08: ioport range 0xd8a0-0xd8bf has been reserved
[ 0.592113] system 00:08: ioport range 0xe000-0xe07f has been reserved
[ 0.592116] system 00:08: ioport range 0xe080-0xe0ff has been reserved
[ 0.592119] system 00:08: ioport range 0xe400-0xe47f has been reserved
[ 0.592122] system 00:08: ioport range 0xe480-0xe4ff has been reserved
[ 0.592125] system 00:08: ioport range 0xe800-0xe87f has been reserved
[ 0.592127] system 00:08: ioport range 0xe880-0xe8ff has been reserved
[ 0.592131] system 00:08: ioport range 0xec00-0xec7f has been reserved
[ 0.592133] system 00:08: ioport range 0xec80-0xecff has been reserved
[ 0.592136] system 00:08: ioport range 0xeeac-0xeeac has been reserved
[ 0.592139] system 00:08: ioport range 0xeeb0-0xeebf has been reserved
[ 0.592142] system 00:08: ioport range 0xeec0-0xeeff has been reserved
[ 0.592150] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.627058] pci 0000:01:0b.0: CardBus bridge, secondary bus 0000:02
[ 0.627063] pci 0000:01:0b.0: IO window: 0x00c000-0x00c0ff
[ 0.627068] pci 0000:01:0b.0: IO window: 0x00c400-0x00c4ff
[ 0.627073] pci 0000:01:0b.0: PREFETCH window: 0x28000000-0x2bffffff
[ 0.627078] pci 0000:01:0b.0: MEM window: 0x30000000-0x33ffffff
[ 0.627083] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.627087] pci 0000:00:1e.0: IO window: 0xc000-0xcfff
[ 0.627093] pci 0000:00:1e.0: MEM window: 0xcff00000-0xcfffffff
[ 0.627097] pci 0000:00:1e.0: PREFETCH window: 0x00000028000000-0x0000002bffffff
[ 0.627117] pci 0000:00:1e.0: setting latency timer to 64
[ 0.627127] pci 0000:01:0b.0: enabling device (0000 -> 0003)
[ 0.627141] pci 0000:01:0b.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.627149] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.627152] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.627154] bus: 01 index 0 io port: [0xc000-0xcfff]
[ 0.627157] bus: 01 index 1 mmio: [0xcff00000-0xcfffffff]
[ 0.627159] bus: 01 index 2 mmio: [0x28000000-0x2bffffff]
[ 0.627161] bus: 01 index 3 io port: [0x00-0xffff]
[ 0.627164] bus: 01 index 4 mmio: [0x000000-0xffffffff]
[ 0.627166] bus: 02 index 0 io port: [0xc000-0xc0ff]
[ 0.627168] bus: 02 index 1 io port: [0xc400-0xc4ff]
[ 0.627170] bus: 02 index 2 mmio: [0x28000000-0x2bffffff]
[ 0.627172] bus: 02 index 3 mmio: [0x30000000-0x33ffffff]
[ 0.627191] NET: Registered protocol family 2
[ 0.627392] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.627759] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.627896] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.628117] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.628126] TCP reno registered
[ 0.628341] NET: Registered protocol family 1
[ 0.628528] checking if image is initramfs... it is
[ 1.128048] Switched to high resolution mode on CPU 0
[ 1.306849] Freeing initrd memory: 7387k freed
[ 1.306921] Simple Boot Flag at 0x7c set to 0x1
[ 1.306966] cpufreq: No nForce2 chipset.
[ 1.307191] audit: initializing netlink socket (disabled)
[ 1.307219] type=2000 audit(1246573100.304:1): initialized
[ 1.314333] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.316033] VFS: Disk quotas dquot_6.5.1
[ 1.316168] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.317324] fuse init (API version 7.10)
[ 1.317511] msgmni has been set to 960
[ 1.318065] alg: No test for stdrng (krng)
[ 1.318118] io scheduler noop registered
[ 1.318121] io scheduler anticipatory registered
[ 1.318123] io scheduler deadline registered
[ 1.318181] io scheduler cfq registered (default)
[ 1.318206] pci 0000:00:02.0: Boot video device
[ 1.318276] pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling
[ 1.322522] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.322541] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.322780] ACPI: AC Adapter [ADP1] (on-line)
[ 1.323565] ACPI Warning (nspredef-0858): \_SB_.BAT1._BIF: Return Package type mismatch at index 12 - found Integer, expected String/Buffer [20080926]
[ 1.324100] ACPI: Battery Slot [BAT1] (battery present)
[ 1.324244] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.324249] ACPI: Power Button (FF) [PWRF]
[ 1.324369] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.324454] ACPI: Lid Switch [LID]
[ 1.324562] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 1.324571] ACPI: Power Button (CM) [PWRB]
[ 1.325161] fan PNP0C0B:00: registered as cooling_device0
[ 1.325174] ACPI: Fan [FAN] (off)
[ 1.325442] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 1.325480] processor ACPI_CPU:00: registered as cooling_device1
[ 1.328440] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.329107] ACPI: Thermal Zone [THRM] (53 C)
[ 1.329233] isapnp: Scanning for PnP cards...
[ 1.681861] isapnp: No Plug & Play device found
[ 1.684673] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.685299] serial 0000:00:1f.6: power state changed by ACPI to D0
[ 1.685311] serial 0000:00:1f.6: enabling device (0000 -> 0001)
[ 1.685327] serial 0000:00:1f.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.685334] serial 0000:00:1f.6: PCI INT B disabled
[ 1.686742] brd: module loaded
[ 1.687526] loop: module loaded
[ 1.687732] Fixed MDIO Bus: probed
[ 1.687742] PPP generic driver version 2.4.2
[ 1.687873] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 1.687939] Driver 'sd' needs updating - please use bus_type methods
[ 1.687956] Driver 'sr' needs updating - please use bus_type methods
[ 1.688130] ata_piix 0000:00:1f.1: version 2.12
[ 1.688151] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.688226] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.688421] scsi0 : ata_piix
[ 1.688664] scsi1 : ata_piix
[ 1.689670] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[ 1.689674] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[ 1.852493] ata1.00: ATA-6: TOSHIBA MK8032GAX, AD001A, max UDMA/100
[ 1.852497] ata1.00: 156301488 sectors, multi 16: LBA48
[ 1.860448] ata1.00: configured for UDMA/100
[ 2.024386] ata2.00: ATAPI: TOSHIBA DVD-ROM SD-R2412, 1431, max UDMA/33
[ 2.040336] ata2.00: configured for UDMA/33
[ 2.042905] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8032GA AD00 PQ: 0 ANSI: 5
[ 2.043172] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[ 2.043241] sd 0:0:0:0: [sda] Write Protect is off
[ 2.043245] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.043356] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.043583] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[ 2.043649] sd 0:0:0:0: [sda] Write Protect is off
[ 2.043653] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.043765] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.043775] sda: sda1 sda2 < sda5 sda6 sda7 >
[ 2.109390] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.109517] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.114943] scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-R2412 1431 PQ: 0 ANSI: 5
[ 2.122788] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 2.122797] Uniform CD-ROM driver Revision: 3.20
[ 2.123011] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.123121] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.124262] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.124311] ehci_hcd 0000:00:1d.7: enabling device (0000 -> 0002)
[ 2.124328] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 2.124371] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.124377] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.124568] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.128513] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.128522] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 2.128545] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x2c080000
[ 2.144018] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.144171] usb usb1: configuration #1 chosen from 1 choice
[ 2.144229] hub 1-0:1.0: USB hub found
[ 2.144255] hub 1-0:1.0: 6 ports detected
[ 2.144539] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.144586] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.144681] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.144696] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.144700] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.144832] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.144876] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
[ 2.145041] usb usb2: configuration #1 chosen from 1 choice
[ 2.145107] hub 2-0:1.0: USB hub found
[ 2.145129] hub 2-0:1.0: 2 ports detected
[ 2.145353] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.145366] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.145371] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.145519] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.145565] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018e0
[ 2.145727] usb usb3: configuration #1 chosen from 1 choice
[ 2.145779] hub 3-0:1.0: USB hub found
[ 2.145800] hub 3-0:1.0: 2 ports detected
[ 2.146109] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.159617] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.159631] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.159974] mice: PS/2 mouse device common for all mice
[ 2.160523] rtc_cmos 00:07: RTC can wake from S4
[ 2.160618] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 2.160653] rtc0: alarms up to one year, 114 bytes nvram
[ 2.160801] device-mapper: uevent: version 1.0.3
[ 2.161108] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 2.161301] device-mapper: multipath: version 1.0.5 loaded
[ 2.161307] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.161576] EISA: Probing bus 0 at eisa.0
[ 2.161588] Cannot allocate resource for EISA slot 1
[ 2.161607] EISA: Detected 0 cards.
[ 2.161775] cpuidle: using governor ladder
[ 2.161851] cpuidle: using governor menu
[ 2.162615] TCP cubic registered
[ 2.162803] NET: Registered protocol family 10
[ 2.163504] lo: Disabled Privacy Extensions
[ 2.163970] NET: Registered protocol family 17
[ 2.164074] Bluetooth: L2CAP ver 2.11
[ 2.164077] Bluetooth: L2CAP socket layer initialized
[ 2.164081] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.164083] Bluetooth: SCO socket layer initialized
[ 2.164183] Bluetooth: RFCOMM socket layer initialized
[ 2.164203] Bluetooth: RFCOMM TTY layer initialized
[ 2.164207] Bluetooth: RFCOMM ver 1.10
[ 2.164416] Using IPI No-Shortcut mode
[ 2.164642] registered taskstats version 1
[ 2.164799] Magic number: 1:760:349
[ 2.164915] rtc_cmos 00:07: setting system clock to 2009-07-02 22:18:21 UTC (1246573101)
[ 2.164919] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.164921] EDD information not available.
[ 2.165698] Freeing unused kernel memory: 532k freed
[ 2.165893] Write protecting the kernel text: 4112k
[ 2.165933] Write protecting the kernel read-only data: 1524k
[ 2.204565] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.644075] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 2.822004] usb 2-1: configuration #1 chosen from 1 choice
[ 2.922670] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
[ 2.922675] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.922758] e100 0000:01:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.946038] e100 0000:01:08.0: PME# disabled
[ 2.959029] e100: eth0: e100_probe: addr 0xcffff000, irq 20, MAC addr 00:08:0d:a3:e2:ca
[ 3.368081] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 3.533147] usb 3-1: configuration #1 chosen from 1 choice
[ 3.655541] usbcore: registered new interface driver hiddev
[ 3.669361] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input5
[ 3.674440] Initializing USB Mass Storage driver...
[ 3.679838] usb-storage: probe of 3-1:1.0 failed with error -5
[ 3.685065] usb-storage: probe of 3-1:1.1 failed with error -5
[ 3.685234] usb-storage: probe of 3-1:1.2 failed with error -5
[ 3.689473] usb-storage: probe of 3-1:1.3 failed with error -1
[ 3.689526] usbcore: registered new interface driver usb-storage
[ 3.689534] USB Mass Storage support registered.
[ 3.700301] generic-usb 0003:046D:C019.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1/input0
[ 3.700344] usbcore: registered new interface driver usbhid
[ 3.700350] usbhid: v2.6:USB HID core driver
[ 3.729744] Marking TSC unstable due to TSC halts in idle
[ 3.847053] PM: Starting manual resume from disk
[ 3.847061] PM: Resume from partition 8:7
[ 3.847063] PM: Checking hibernation image.
[ 3.847358] PM: Resume from disk failed.
[ 3.875179] kjournald starting. Commit interval 5 seconds
[ 3.875208] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.426922] udev: starting version 141
[ 10.613950] Linux agpgart interface v0.103
[ 10.619266] agpgart-intel 0000:00:00.0: Intel 855GM Chipset
[ 10.619486] agpgart-intel 0000:00:00.0: detected 16252K stolen memory
[ 10.621353] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xd8000000
[ 10.684782] parport_pc 00:09: activated
[ 10.684791] parport_pc 00:09: reported by Plug and Play ACPI
[ 10.684842] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 10.717905] acpi device:0f: registered as cooling_device2
[ 10.718898] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0e/input/input6
[ 10.748341] ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no)
[ 10.808940] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19-dev-acpikeys
[ 10.808947] toshiba_acpi: HCI method: \_SB_.VALZ.GHCI
[ 10.810162] toshiba_acpi: Toshiba hotkeys are sent as ACPI events
[ 10.810169] toshiba_acpi: ktoshkeyd will check 2 times per second
[ 10.811051] toshiba_acpi: Dropped 0 keys from the queue on startup
[ 10.929634] usbcore: registered new interface driver usbserial
[ 10.929789] USB Serial support registered for generic
[ 10.929974] usbcore: registered new interface driver usbserial_generic
[ 10.929979] usbserial: USB Serial Driver core
[ 10.938807] USB Serial support registered for GSM modem (1-port)
[ 10.938958] option 3-1:1.0: GSM modem (1-port) converter detected
[ 10.939399] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
[ 10.939436] option 3-1:1.1: GSM modem (1-port) converter detected
[ 10.939840] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
[ 10.939877] option 3-1:1.2: GSM modem (1-port) converter detected
[ 10.940318] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
[ 10.940389] usbcore: registered new interface driver option
[ 10.940395] option: v0.7.2:USB Driver for GSM modems
[ 11.005744] intel_rng: FWH not detected
[ 11.029434] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.185140] iTCO_vendor_support: vendor-support=0
[ 11.378503] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 11.399319] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 11.399667] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0xd860)
[ 11.399894] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.509554] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 11.706991] yenta_cardbus 0000:01:0b.0: CardBus bridge found [1179:0001]
[ 11.833763] yenta_cardbus 0000:01:0b.0: ISA IRQ mask 0x0c38, PCI irq 18
[ 11.833770] yenta_cardbus 0000:01:0b.0: Socket status: 30000020
[ 11.833780] yenta_cardbus 0000:01:0b.0: pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff
[ 11.833785] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc000-0xcfff: clean.
[ 11.834005] yenta_cardbus 0000:01:0b.0: pcmcia: parent PCI bridge Memory window: 0xcff00000 - 0xcfffffff
[ 11.834009] yenta_cardbus 0000:01:0b.0: pcmcia: parent PCI bridge Memory window: 0x28000000 - 0x2bffffff
[ 12.175802] Intel ICH 0000:00:1f.5: power state changed by ACPI to D0
[ 12.175816] Intel ICH 0000:00:1f.5: enabling device (0000 -> 0003)
[ 12.175825] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 12.176077] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 12.250850] ppdev: user-space parallel port driver
[ 12.318487] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input8
[ 12.399455] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input9
[ 12.484365] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 12.484417] pci 0000:02:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
[ 12.643832] cfg80211: Calling CRDA to update world regulatory domain
[ 12.730253] cfg80211: World regulatory domain updated:
[ 12.730262] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.730266] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.730268] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.730271] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.730274] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.730277] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.819882] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 12.821039] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 12.821541] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 12.821991] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 12.822925] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 12.928870] ath5k_pci 0000:02:00.0: enabling device (0000 -> 0002)
[ 12.928883] ath5k_pci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 12.929073] ath5k_pci 0000:02:00.0: registered as 'phy0'
[ 13.019074] phy0: Selected rate control algorithm 'pid'
[ 13.078392] ath5k phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45)
[ 13.100062] intel8x0_measure_ac97_clock: measured 55250 usecs
[ 13.100067] intel8x0: clocking to 48000
[ 13.367144] lp0: using parport0 (interrupt-driven).
[ 13.623589] Adding 176672k swap on /dev/sda7. Priority:-1 extents:1 across:176672k
[ 14.303216] EXT3 FS on sda6, internal journal
[ 15.852576] type=1505 audit(1246562315.187:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2065
[ 15.928096] type=1505 audit(1246562315.263:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2069
[ 15.928427] type=1505 audit(1246562315.263:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2069
[ 15.928617] type=1505 audit(1246562315.263:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2069
[ 15.928784] type=1505 audit(1246562315.263:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2069
[ 16.119675] type=1505 audit(1246562315.451:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2074
[ 16.120213] type=1505 audit(1246562315.455:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2074
[ 16.181687] type=1505 audit(1246562315.515:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2078
[ 21.105289] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.105294] Bluetooth: BNEP filters: protocol multicast
[ 21.129810] Bridge firewalling registered
[ 24.635289] [drm] Initialized drm 1.1.0 20060810
[ 24.646114] pci 0000:00:02.0: power state changed by ACPI to D0
[ 24.646130] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 24.646137] pci 0000:00:02.0: setting latency timer to 64
[ 24.646491] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 24.757098] [drm:i915_setparam] *ERROR* unknown parameter 4
[ 24.757182] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 26.407937] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 26.685826] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.717534] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 38.172665] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 46.193854] CPU0 attaching NULL sched-domain.
[ 46.208192] CPU0 attaching NULL sched-domain.
[ 116.520684] PPP BSD Compression module registered
[ 116.558736] PPP Deflate Compression module registered

Amennyire én tudom, az a helyzet, hogy a régebbi típusoknál volt a modemben egy kis tárhely, ezen volt/van a modem meghajtója, és a szolgáltató elérési adatai, - persze csak window$hoz, kitudja miert:)) - meg ilyesmi. De elég gány, a linux általában valami cdrom-nak látta, nyilván az olvasásával is baj volt.

ezért aztán az eszközt automatikusan modem módba kapcsolja a modulja - option.ko -, az sd kártyáját meg valahol az udev.d valamelyik rules-e ignorálja. Amúgy egyszerre nem lehet modemként, és sd-kent is használni. - de mondom ez egy régebbi típus volt -

Vagyis valahol a /udev/rules.d könyvtárban van, vagy volt legutoljára amit keresel.

mount | grep VMC
/dev/scd0 on /media/VMC LITE 9.3.2.1 type iso9660 (ro,nosuid,nodev,uhelper=hal,uid=1000)

nekem egy k3715-ös van, úgy tud egyszerre modemként működni, hogy közben símán írok/olvasok a külön belepakolt 2 GByte-os microSD kártyára

de viszont igen, van egy kis tárhelye, amiből win alól ennyit látni:
ls -lh | awk '{print $5" "$8}'
113 Autorun.inf
37M helper.exe
320K setup_vmc_lite.exe

ui.: és még mindig nem javították ki a vodafone oldalán a rossz APN-t, és a Pannon-nál is milyen szép a "Windows 2000/XP/Vista and Mac OS támogatás" felirat [and - és - ctrl+c?]

jaj, most nézem nem VMC néven van nálam a külön belecsúsztatott microSD kártya, hanem:

/dev/sdb1 on /media/disk type ext3 (rw,nosuid,nodev,uhelper=hal)

-ként:

fdisk -l /dev/sdb1

Disk /dev/sdb1: 1974 MB, 1974034944 bytes
255 heads, 63 sectors/track, 239 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000

de nekem k3715 van!!, csak erre válaszoltam mármint pontosabban:

"Amúgy egyszerre nem lehet modemként, és sd-kent is használni. - de mondom ez egy régebbi típus volt -"

csak válaszként adtam, hogy másik típusokon már lehet használni a modem funkciót, és az sd kártya mountolást/írást a egyszerre.

remélem nem az lesz a topic vége, mint a digitális diktafonoknál Linux alatt, hogy vigyázni kell vásárláskor, mert egyszerűen jelenleg nem olyan jó a "szedjük le a felvételeket a diktafon tárolójáról Linux alatt" dolog.

Hello,

Nekem van egy k3715 modemem is, de az alol se ismeri fel a Micro SD-t. Azaz az E169 es a k3715 is jol megy modemkent, de a microSD-t nem latja az Ubuntu.

gbor,
neked, hogy sikerult elerned, hogy lassa a microSD-t? Esetleg neked automatikusan felismerte? (btw nekem is 2GBos:)

A linket, amit kuldtel koszonom. De sajnos nem sokat ertek belole, marmint a reverse the "regression code" nekem kinaiul van, nem tudom, hogyan kell csinalni.

tnx

Egy síma alap Debian Lenny telepítés után ezt használom, tehát felrakom a scripttel a wvdialt, vodafone-mobile-connect-et, és utána, ahogy csatlakoztatom az usb-s modemet, pár másodperc, és már felcsatolódik a microSD kártya + ALT+F2-őt nyomok, beírom, hogy wvdial, és már net is van. Lehet, hogy az említett vodafone-mobile-connect program telepítésekor felkerülő usb-modeswitch, és ozerocdoff csomagok eredményezik ezt.
Hasznos dolog különben, az ember felrakja az SD kártyára a pl.: OFFLINE telepítéshez szükséges deb filéket, hogy egy net nélküli Linuxos gépen is lehessen gyorsan mobilnetezni:P [utóbbiról a blogon az "ui3."-ban]. Amúgy tegnap este megpróbálkoztam egy másik fórumon, hátha ott volt már valakinek ezzel dolga. A GUI-s vodafone-mobile-connect-et próbáld meg esetleg feltelepíteni, hátha említetten hoz valami változást az usb-modeswitch, és ozerocdoff.

update: kép
felraktam egy jauntyt, semmi..
felraktam egy Lenny-t, a microSD látszik símán.

ahogy elsőre néztem VirtualBox-ban plusz szórakozás lenne az usb-s pöcköt teljes "egészében átrakni", natívan kéne kipróbálnih - hogy a vodafone-mobile-connect felrakása után vajon ubuntu alatt is elérhető a modem modemként+mass storage-ként

update2.: de még akkor se biztos, hogy a mobile connect nem csak vodafone-only program

A dolog szepseghibaja, hogy az E169 Tele2 szolgaltatonal van (kulfold), most onnan jon a net, a k3715 tenyleg vodas, de azon a netet csak akkor fogom tudni megnezni, ha ujra otthon leszek.
De gondolom a logikat kovetve Tele2vel is mennie kellene, csak a tele2os programot kell hozza megtalalnom Linux ala (szoljon ha valaki esetleg talakozott vele, nekem a google 2 talalatot adott ki, egyik sem jo :(