Huawei E220 + openSuse 10.3

Tiszteletem!

Frissen telepített DVD-s openSuse 10.3-mal szeretném használni a Vodafonos Huawei E220-as GPRS modememet. A probléma, hogy szerintem nem modemnek ismeri fel a rendszer.

Az lsusb-vel ezt látom:

Bus 004 Device 001: ID 0000:0000
Bus 003 Device 002: ID 12d1:1003
Bus 003 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000

A rendszer információ a következőket írja róla:

15: udi = '/org/freedesktop/Hal/devices/storage_serial_HUAWEI_Mass_Storage_0_0'
block.minor = 1 (0x1)
storage.requires_eject = true
info.capabilities = { 'storage', 'block', 'storage.cdrom' }
storage.bus = 'usb'
storage.cdrom.support_media_changed = true
storage.cdrom.support_multisession = true
storage.removable.media_available = true
storage.cdrom.hddvdr = false
storage.cdrom.mrw_w = false
org.freedesktop.Hal.Device.resmgr.method_names = { 'Grant', 'Revoke' }
info.category = 'storage'
info.product = 'Mass Storage'
storage.drive_type = 'cdrom'
storage.hotpluggable = true
storage.physical_device = '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0'
storage.cdrom.mrw = false
storage.vendor = 'HUAWEI'
storage.media_check_enabled = true
org.freedesktop.Hal.Device.Storage.method_names = { 'Eject', 'CloseTray' }
storage.cdrom.dvd = false
storage.removable.media_size = 33554432ull (0x2000000ull)
block.is_volume = false
storage.firmware_version = '2.31'
storage.cdrom.bdre = false
storage.cdrom.mo = false
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_HUAWEI_Mass_Storage_0_0'
info.addons = { 'hald-addon-storage' }
storage.serial = 'HUAWEI_Mass_Storage-0:0'
info.parent = '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0_scsi_host_scsi_device_lun0'
storage.cdrom.dvdplusr = false
org.freedesktop.Hal.Device.resmgr.method_signatures = { '', '' }
storage.size = 0ull (0x0ull)
org.freedesktop.Hal.Device.Storage.method_signatures = { 'as', 'as' }
block.device = '/dev/sr1'
info.callouts.add = { 'hal-resmgr' }
org.freedesktop.Hal.Device.Storage.method_argnames = { 'extra_options', 'extra_options' }
storage.cdrom.cdr = false
storage.no_partitions_hint = true
storage.cdrom.bdr = false
storage.removable = true
storage.lun = 0 (0x0)
info.vendor = 'HUAWEI'
storage.cdrom.dvdram = false
storage.cdrom.dvdplusrwdl = false
storage.cdrom.dvdr = false
info.interfaces = { 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.resmgr' }
org.freedesktop.Hal.Device.Storage.method_execpaths = { 'hal-storage-eject', 'hal-storage-closetray' }
storage.originating_device = '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0'
storage.model = 'Mass Storage'
info.udi = '/org/freedesktop/Hal/devices/storage_serial_HUAWEI_Mass_Storage_0_0'
storage.cdrom.dvdplusrdl = false
storage.cdrom.bd = false
storage.cdrom.hddvdrw = false
block.major = 11 (0xb)
storage.removable.support_async_notification = false
resmgr.class = 'cdrom'
linux.hotplug_type = 3 (0x3)
storage.cdrom.cdrw = false
storage.cdrom.dvdplusrw = false
org.freedesktop.Hal.Device.resmgr.method_argnames = { '', '' }
linux.sysfs_path = '/sys/block/sr1'
storage.cdrom.dvdrw = false
storage.automount_enabled_hint = true
storage.cdrom.hddvd = false
org.freedesktop.Hal.Device.resmgr.method_execpaths = { 'hal-resmgr-grant', 'hal-resmgr-revoke' }

------

65: udi = '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0_scsi_host_scsi_device_lun0'
scsi.vendor = 'HUAWEI'
scsi.bus = 0 (0x0)
info.bus = 'scsi'
scsi.target = 0 (0x0)
scsi.lun = 0 (0x0)
info.udi = '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0_scsi_host_scsi_device_lun0'
linux.subsystem = 'scsi'
info.subsystem = 'scsi'
info.product = 'SCSI Device'
scsi.model = 'Mass Storage'
linux.hotplug_type = 2 (0x2)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.1/usb3/3-2/3-2:1.0/host2/target2:0:0/2:0:0:0'
scsi.host = 2 (0x2)
scsi.type = 'cdrom'
info.parent = '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0_scsi_host'
info.linux.driver = 'sr'

---

68: udi = '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial'
linux.subsystem = 'usb'
info.product = 'HUAWEI Mobile'
usb_device.device_revision_bcd = 0 (0x0)
usb_device.product = 'HUAWEI Mobile'
usb_device.product_id = 4099 (0x1003)
usb_device.speed = 12.0000
usb_device.vendor = 'HUAWEI Technologies'
usb_device.can_wake_up = true
usb_device.configuration_value = 1 (0x1)
usb_device.linux.device_number = 2 (0x2)
info.linux.driver = 'usb'
usb_device.device_class = 0 (0x0)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_1'
usb_device.bus_number = 3 (0x3)
usb_device.device_protocol = 0 (0x0)
usb_device.is_self_powered = false
info.subsystem = 'usb_device'
info.vendor = 'HUAWEI Technologies'
usb_device.version = 1.10000
usb_device.num_interfaces = 1 (0x1)
usb_device.vendor_id = 4817 (0x12d1)
usb_device.speed_bcd = 4608 (0x1200)
usb_device.version_bcd = 272 (0x110)
info.udi = '/org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial'
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.1/usb3/3-2'
usb_device.num_configurations = 1 (0x1)
info.bus = 'usb_device'
linux.device_file = '/dev/bus/usb/003/002'
usb_device.num_ports = 0 (0x0)
usb_device.max_power = 500 (0x1f4)
linux.hotplug_type = 2 (0x2)
usb_device.device_subclass = 0 (0x0)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.1/usb3/3-2'

---

P: /block/sr1
N: sr1
S: scd1
S: disk/by-id/usb-HUAWEI_Mass_Storage-0:0
S: disk/by-path/pci-0000:00:03.1-usb-0:2:1.0-scsi-0:0:0:0
S: cdrom1
E: ID_CDROM=1
E: DEVTYPE=disk
E: ID_VENDOR=HUAWEI
E: ID_MODEL=Mass_Storage
E: ID_REVISION=2.31
E: ID_SERIAL=HUAWEI_Mass_Storage-0:0
E: ID_TYPE=cd
E: ID_INSTANCE=0:0
E: ID_BUS=usb
E: ID_PATH=pci-0000:00:03.1-usb-0:2:1.0-scsi-0:0:0:0

---

links: /dev/scd1, /dev/disk/by-id/usb-HUAWEI_Mass_Storage-0:0, /dev/disk/by-path/pci-0000:00:03.1-usb-0:2:1.0-scsi-0:0:0:0, /dev/cdrom1

---

Hogyan tudnám elmagyarázni neki, hogy kicsoda is valójában?

Minden jót!

novi

u.i.: Elolvastam a fórumon az idevágó részeket, de nem találtam meg a megoldást.