Elado SGI Altix 350 Server + Kulso Vault SCSI tarolo.

Elado egy SGI Altix 350 Server

2 x Itanium 2 (Madison) @ 1300 MHz
8G RAM
2 x 18G Ultra 320 SCSI disk (Seagate Cheetah 15K.3 ST318453LC)
2 x Gigabit Ethernet:
- Intel(R) PRO/1000
- Broadcom Tigon3

A gep melle jar 2db kulso SCSI tarolo:
Egyenkent 6db disket tud befogadni, de sajnos
osszesen csak 10 db keret van hozza.

Linux cpuinfo es dmesg:

processor  : 0
vendor     : GenuineIntel
arch       : IA-64
family     : 31
model      : 1
model name : Madison
revision   : 5
archrev    : 0
features   : branchlong
cpu number : 0
cpu regs   : 4
cpu MHz    : 1300.000
itc MHz    : 1300.000000
BogoMIPS   : 1945.60
siblings   : 1
 
processor  : 1
vendor     : GenuineIntel
arch       : IA-64
family     : 31
model      : 1
model name : Madison
revision   : 5
archrev    : 0
features   : branchlong
cpu number : 0
cpu regs   : 4
cpu MHz    : 1300.000
itc MHz    : 1300.000000
BogoMIPS   : 1945.60
siblings   : 1
 
EFI v1.10 by INTEL: SALsystab=0x3002a08b00 ACPI 2.0=0x3002a092f0
ACPI: RSDP 3002A092F0, 0024 (r2    SGI)
ACPI: XSDT 3002A0C620, 0044 (r1    SGI  XSDTSN2    10001           6C)
ACPI: APIC 3002A09390, 0044 (r1    SGI  APICSN2    10001            1)
ACPI: SRAT 3002A093F0, 0078 (r1    SGI  SRATSN2    10001            1)
ACPI: SLIT 3002A09480, 002D (r1    SGI  SLITSN2    10001            1)
ACPI: FACP 3002A09510, 00F4 (r3    SGI  FACPSN2    30001            1)
ACPI: DSDT 3002A0C110, 0024 (r2    SGI  DSDTSN2    20001          39E)
ACPI: FACS 3002A094C0, 0040
Number of logical nodes in system = 1
Number of memory chunks in system = 1
Entering add_active_range(0, 12585984, 12709888) 0 entries of 12800 used
Entering add_active_range(0, 13631488, 13758464) 1 entries of 12800 used
Entering add_active_range(0, 14680064, 14932479) 2 entries of 12800 used
Entering add_active_range(0, 14933504, 14933846) 3 entries of 12800 used
Entering add_active_range(0, 14933861, 14933892) 4 entries of 12800 used
Entering add_active_range(0, 14933920, 14933926) 5 entries of 12800 used
SAL 2.9: SGI SN2 version 4.84
SAL Platform features: ITC_Drift
SAL: AP wakeup using external interrupt vector 0x12
No logical to physical processor mapping available
ACPI: Local APIC address c0000000fee00000
ACPI: Error parsing MADT - no IOSAPIC entries
register_intr: No IOSAPIC for GSI 52
2 CPUs available, 2 CPUs total
Increasing MCA rendezvous timeout from 20000 to 49000 milliseconds
MCA related initialization done
ACPI: RSDP 3002A092F0, 0024 (r2    SGI)
ACPI: XSDT 3002A0C620, 006C (r1    SGI  XSDTSN2    10001           6C)
ACPI: APIC 3002A09390, 0044 (r1    SGI  APICSN2    10001            1)
ACPI: SRAT 3002A093F0, 0078 (r1    SGI  SRATSN2    10001            1)
ACPI: SLIT 3002A09480, 002D (r1    SGI  SLITSN2    10001            1)
ACPI: FACP 3002A09510, 00F4 (r3    SGI  FACPSN2    30001            1)
ACPI: DSDT 3002A0C110, 039E (r2    SGI  DSDTSN2    20101          39E)
ACPI: FACS 3002A094C0, 0040
ACPI: SSDT 3002A0B5E0, 0095 (r2    SGI  SSDTSN2    20101           95)
ACPI: SSDT 3002A0B6F0, 0095 (r2    SGI  SSDTSN2    20101           95)
ACPI: SSDT 3002A0C4C0, 0095 (r2    SGI  SSDTSN2    20101           95)
ACPI: SSDT 3002A0B7A0, 0095 (r2    SGI  SSDTSN2    20101           95)
ACPI: SSDT 3002A0C570, 0095 (r2    SGI  SSDTSN2    20101           95)
SGI SAL version 4.84
Virtual mem_map starts at 0xa0007fffce200000
Zone PFN ranges:
  Normal   12585984 -> 14934016
early_node_map[6] active PFN ranges
    0: 12585984 -> 12709888
    0: 13631488 -> 13758464
    0: 14680064 -> 14932479
    0: 14933504 -> 14933846
    0: 14933861 -> 14933892
    0: 14933920 -> 14933926
On node 0 totalpages: 503674
  Normal zone: 8025 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 495649 pages, LIFO batch:7
Built 1 zonelists.  Total pages: 495649
Kernel command line: BOOT_IMAGE=scsi0:/EFI/debian/boot/vmlinux.gz root=/dev/sda4 ro
PID hash table entries: 4096 (order: 12, 32768 bytes)
CPU 0: base freq=200.000MHz, ITC ratio=13/2, ITC freq=1300.000MHz
Console: colour dummy device 80x25
Memory: 8013648k/8050336k available (5506k code, 45136k reserved, 2453k data, 656k init)
McKinley Errata 9 workaround not needed; disabling it
Calibrating delay loop... 1945.60 BogoMIPS (lpj=3891200)
Dentry cache hash table entries: 1048576 (order: 9, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 8, 4194304 bytes)
Mount-cache hash table entries: 1024
ACPI: Core revision 20070126
Boot processor id 0x0/0x0
CPU 1: base freq=200.000MHz, ITC ratio=13/2, ITC freq=1300.000MHz
Brought up 2 CPUs
Total of 2 processors activated (3891.20 BogoMIPS).
migration_cost=3874
DMI not present or invalid.
NET: Registered protocol family 16
No dock devices found.
ACPI  DSDT OEM Rev 0x20101
ACPI: bus type pci registered
ACPI: SCI (ACPI GSI 52) not registered
ACPI: Interpreter enabled
ACPI: Using platform specific model for interrupt routing
ACPI: PCI Root Bridge [P000] (0001:00)
ACPI: PCI Interrupt Routing Table [\_SB_.H000.P000.D010._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.H000.P000.D030._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.H000.P000.D040._PRT]
ACPI: PCI Root Bridge [P001] (0002:00)
ACPI: PCI Interrupt Routing Table [\_SB_.H000.P001.D010._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.H000.P001.D020._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 2 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 7, 2097152 bytes)
TCP established hash table entries: 1048576 (order: 10, 25165824 bytes)
TCP bind hash table entries: 65536 (order: 6, 1048576 bytes)
TCP: Hash tables configured (established 1048576 bind 65536)
TCP reno registered
perfmon: version 2.0 IRQ 238
perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits)
PAL Information Facility v0.5
perfmon: added sampling format default_format
perfmon_default_smpl: default_format v2.0 registered
Total HugeTLB memory allocated, 0
io scheduler noop registered
io scheduler cfq registered (default)
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (FF) as /class/input/input1
ACPI: Sleep Button (FF) [SLPF]
EFI Time Services Driver v0.4
sn_console: Console driver init
ttySG0 at I/O 0x0 (irq = 0) is a SGI SN L1
ACPI: PCI Interrupt 0001:00:01.0[A] -> GSI 60 (level, low) -> IRQ 60
IOC4 0001:00:01.0: IO9 card detected.
IOC4 0001:00:01.0: PCI clock is 15 ns.
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt 0002:00:02.0[A] -> GSI 64 (level, low) -> IRQ 64
e1000: 0002:00:02.0: e1000_probe: (PCI:66MHz:64-bit) 00:04:23:ca:aa:da
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
tg3.c:v3.77 (May 31, 2007)
ACPI: PCI Interrupt 0001:00:04.0[A] -> GSI 62 (level, low) -> IRQ 62
eth1: Tigon3 [partno(030-1771-000) rev 0105 PHY(5701)] (PCI:66MHz:64-bit) 10/100/1000Base-T Ethernet 08:00:69:13:f0:87
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[0]
eth1: dma_rwctrl[76ff3f0f] dma_mask[64-bit]
Linux video capture interface: v2.00
Loading iSCSI transport class v2.0-724.
qla1280: QLA12160 found on PCI bus 0, dev 3
ACPI: PCI Interrupt 0001:00:03.0[A] -> GSI 61 (level, low) -> IRQ 61
scsi(0): Enabling SN2 PCI DMA dual channel lockup workaround
scsi(0): Enabling SN2 PCI DMA workaround
scsi(0:0): Resetting SCSI BUS
scsi(0:1): Resetting SCSI BUS
scsi0 : QLogic QLA12160 PCI to SCSI Host Adapter
       Firmware version: 10.04.42, Driver version 3.26
scsi 0:0:1:0: Direct-Access     SEAGATE  ST318453LC       0002 PQ: 0 ANSI: 3
scsi(0:0:1:0): Sync: period 9, offset 14, Wide, DT
qla1280: QLA12160 found on PCI bus 0, dev 1
ACPI: PCI Interrupt 0002:00:01.0[A] -> GSI 63 (level, low) -> IRQ 63
scsi(1): Enabling SN2 PCI DMA dual channel lockup workaround
scsi(1): Enabling SN2 PCI DMA workaround
scsi(1:0): Resetting SCSI BUS
scsi(1:1): Resetting SCSI BUS
scsi1 : QLogic QLA12160 PCI to SCSI Host Adapter
       Firmware version: 10.04.42, Driver version 3.26
sd 0:0:1:0: [sda] 35843686 512-byte hardware sectors (18352 MB)
sd 0:0:1:0: [sda] Write Protect is off
sd 0:0:1:0: [sda] Mode Sense: ab 00 10 08
sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:1:0: [sda] 35843686 512-byte hardware sectors (18352 MB)
sd 0:0:1:0: [sda] Write Protect is off
sd 0:0:1:0: [sda] Mode Sense: ab 00 10 08
sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:1:0: [sda] Attached SCSI disk
mice: PS/2 mouse device common for all mice
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
IOC4 firmware revision 79
0001:00:01.0: ttyIOC0 at I/O 0x0 (irq = 60) is a SGI IOC4 Serial [rs232]
0001:00:01.0: ttyIOC1 at I/O 0x1 (irq = 60) is a SGI IOC4 Serial [rs232]
0001:00:01.0: ttyIOC2 at I/O 0x2 (irq = 60) is a SGI IOC4 Serial [rs232]
0001:00:01.0: ttyIOC3 at I/O 0x3 (irq = 60) is a SGI IOC4 Serial [rs232]
0001:00:01.0: ttyAIOC0 at I/O 0x0 (irq = 60) is a SGI IOC4 Serial [rs422]
0001:00:01.0: ttyAIOC1 at I/O 0x1 (irq = 60) is a SGI IOC4 Serial [rs422]
0001:00:01.0: ttyAIOC2 at I/O 0x2 (irq = 60) is a SGI IOC4 Serial [rs422]
0001:00:01.0: ttyAIOC3 at I/O 0x3 (irq = 60) is a SGI IOC4 Serial [rs422]
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 656kB freed
EXT3 FS on sda4, internal journal
PM: Writing back config space on device 0001:00:04.0 at offset b (was 164514e4, writing 801010a9)
PM: Writing back config space on device 0001:00:04.0 at offset 3 (was 0, writing 4000)
PM: Writing back config space on device 0001:00:04.0 at offset 2 (was 2000000, writing 2000015)
PM: Writing back config space on device 0001:00:04.0 at offset 1 (was 2b00000, writing 2b00006)
tg3: eth1: Link is up at 1000 Mbps, full duplex.
tg3: eth1: Flow control is on for TX and on for RX.

Ar: 950000 HUF + AFA

Erdeklodni a +36703341583 es a +36702018006 -os telefonszamon lehet.