Linux 2.6.8-rc2 + NVIDIA probléma.

Kérdés: Hogyan lehet, hogy saját verziónevet adj a kernelnek? Pl. ahogy a Mandrake csinál, 2.6.3-4mdk ? Meg láttam valakinek olyant, hogy 2.6.6-love2

Köszi, fordul, mindjárt jövök az outputokkal. Még egy kérdés: Slack10-ben nem találok glxinfo-t illetve glxgears-t, melyik csomagban rejtõznek? :)

Na, jön az output:

root@darkstar303:/home/eddie303# /usr/X11/bin/xvinfo
X-Video Extension version 2.2
screen #0
Adaptor #0: "NV04 Video Overlay"
number of ports: 1
port base: 89
operations supported: PutImage
supported visuals:
depth 24, visualID 0x21
depth 24, visualID 0x23
depth 24, visualID 0x24
depth 24, visualID 0x25
depth 24, visualID 0x26
depth 24, visualID 0x27
depth 24, visualID 0x28
depth 24, visualID 0x29
depth 24, visualID 0x22
depth 24, visualID 0x2a
depth 24, visualID 0x2b
depth 24, visualID 0x2c
depth 24, visualID 0x2d
depth 24, visualID 0x2e
depth 24, visualID 0x2f
depth 24, visualID 0x30
number of attributes: 4
"XV_DOUBLE_BUFFER" (range 0 to 1)
client settable attribute
client gettable attribute (current value is 1)
"XV_COLORKEY" (range 0 to 16777215)
client settable attribute
client gettable attribute (current value is 66046)
"XV_AUTOPAINT_COLORKEY" (range 0 to 1)
client settable attribute
client gettable attribute (current value is 1)
"XV_SET_DEFAULTS" (range 0 to 0)
client settable attribute
maximum XvImage size: 2046 x 2046
Number of image formats: 4
id: 0x32595559 (YUY2)
guid: 59555932-0000-0010-8000-00aa00389b71
bits per pixel: 16
number of planes: 1
type: YUV (packed)
id: 0x32315659 (YV12)
guid: 59563132-0000-0010-8000-00aa00389b71
bits per pixel: 12
number of planes: 3
type: YUV (planar)
id: 0x59565955 (UYVY)
guid: 55595659-0000-0010-8000-00aa00389b71
bits per pixel: 16
number of planes: 1
type: YUV (packed)
id: 0x30323449 (I420)
guid: 49343230-0000-0010-8000-00aa00389b71
bits per pixel: 12
number of planes: 3
type: YUV (planar)
Adaptor #1: "NV05 Video Blitter"
number of ports: 32
port base: 90
operations supported: PutImage
supported visuals:
depth 24, visualID 0x21
depth 24, visualID 0x23
depth 24, visualID 0x24
depth 24, visualID 0x25
depth 24, visualID 0x26
depth 24, visualID 0x27
depth 24, visualID 0x28
depth 24, visualID 0x29
depth 24, visualID 0x22
depth 24, visualID 0x2a
depth 24, visualID 0x2b
depth 24, visualID 0x2c
depth 24, visualID 0x2d
depth 24, visualID 0x2e
depth 24, visualID 0x2f
depth 24, visualID 0x30
no port attributes defined
maximum XvImage size: 2046 x 2046
Number of image formats: 5
id: 0x32595559 (YUY2)
guid: 59555932-0000-0010-8000-00aa00389b71
bits per pixel: 16
number of planes: 1
type: YUV (packed)
id: 0x32315659 (YV12)
guid: 59563132-0000-0010-8000-00aa00389b71
bits per pixel: 12
number of planes: 3
type: YUV (planar)
id: 0x59565955 (UYVY)
guid: 55595659-0000-0010-8000-00aa00389b71
bits per pixel: 16
number of planes: 1
type: YUV (packed)
id: 0x30323449 (I420)
guid: 49343230-0000-0010-8000-00aa00389b71
bits per pixel: 12
number of planes: 3
type: YUV (planar)
id: 0x3
guid: 03000000-0000-0010-8000-00aa00389b71
bits per pixel: 32
number of planes: 1
type: RGB (packed)
depth: 24
red, green, blue masks: 0xff0000, 0xff00, 0xff
Adaptor #2: "NVIDIA Video Interface Port"
number of ports: 1
port base: 122
operations supported: PutVideo
supported visuals:
depth 24, visualID 0x21
depth 24, visualID 0x23
depth 24, visualID 0x24
depth 24, visualID 0x25
depth 24, visualID 0x26
depth 24, visualID 0x27
depth 24, visualID 0x28
depth 24, visualID 0x29
depth 24, visualID 0x22
depth 24, visualID 0x2a
depth 24, visualID 0x2b
depth 24, visualID 0x2c
depth 24, visualID 0x2d
depth 24, visualID 0x2e
depth 24, visualID 0x2f
depth 24, visualID 0x30
number of attributes: 4
"XV_ENCODING" (range 0 to 1)
client settable attribute
client gettable attribute (current value is 0)
"XV_COLORKEY" (range 0 to 16777215)
client settable attribute
client gettable attribute (current value is 66046)
"XV_AUTOPAINT_COLORKEY" (range 0 to 1)
client settable attribute
client gettable attribute (current value is 1)
"XV_SET_DEFAULTS" (range 0 to 0)
client settable attribute
number of encodings: 2
encoding ID #0: "ntsc"
size: 720 x 480
rate: 59.940060
encoding ID #1: "pal"
size: 720 x 576
rate: 50.000000

-----
Xorg.conf (Az elejérõl kivéve az 1 oldalas kommentet) :
Section "Module"

# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection

# This loads the Type1 and FreeType font modules
Load "type1"
Load "speedo"
Load "freetype"
# Load "xtt"

# This loads the GLX module
Load "glx"
# This loads the DRI module
# Load "dri"

EndSection

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#

FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path. The default path is shown here.

# ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

# Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.

# Option "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

# Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.

# Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

# Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

# Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

# Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

# Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

Identifier "Keyboard1"
Driver "Keyboard"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

# Option "Protocol" "Xqueue"

Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for X.Org
# Option "XkbRules" "__XKBDEFRULES__"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""

# Option "XkbDisable"

Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us_intl"

EndSection

# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "4 5 6 7"
# Mouse-speed setting for PS/2 mouse.

# Option "Resolution" "256"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

# Option "Protocol" "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

# Option "BaudRate" "9600"
# Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice

# Option "ChordMiddle"

EndSection

# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

Identifier "IBM G72"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

HorizSync 30-71

# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

VertRefresh 50-87

EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"

# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.

# Chipset "generic"

# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.

# BusID "PCI:0:10:0"

# VideoRam 256

# Clocks 25.2 28.3

EndSection

# Device configured by xf86config:

Section "Device"
Identifier "Guillemot Maxi Gamer Xentor"
Driver "nvidia"
#VideoRam 16384
# Insert Clocks lines here if appropriate
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "Guillemot Maxi Gamer Xentor"
Monitor "IBM G72"
DefaultDepth 24

Subsection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480" "640x400"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480" "640x400"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480" "640x400"
ViewPort 0 0
EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
Identifier "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.

Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"

EndSection

# Section "DRI"
# Mode 0666
# EndSection
-----

/usr/src/linux/.config:

#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y

#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
CONFIG_HPET_TIMER=y
# CONFIG_HPET_EMULATE_RTC is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
CONFIG_X86_CPUID=y

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
# CONFIG_REGPARM is not set

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_SOFTWARE_SUSPEND=y
# CONFIG_PM_DISK is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set

#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
CONFIG_APM_DISPLAY_BLANK=y
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set

#
# Plug and Play support
#

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_LBD is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
CONFIG_SCSI_AIC7XXX_OLD=m
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=y
# CONFIG_IP_NF_FTP is not set
# CONFIG_IP_NF_IRC is not set
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
CONFIG_IP_NF_QUEUE=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_LIMIT=y
CONFIG_IP_NF_MATCH_IPRANGE=y
CONFIG_IP_NF_MATCH_MAC=y
CONFIG_IP_NF_MATCH_PKTTYPE=y
CONFIG_IP_NF_MATCH_MARK=y
CONFIG_IP_NF_MATCH_MULTIPORT=y
CONFIG_IP_NF_MATCH_TOS=y
CONFIG_IP_NF_MATCH_RECENT=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_DSCP=y
CONFIG_IP_NF_MATCH_AH_ESP=y
CONFIG_IP_NF_MATCH_LENGTH=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_MATCH_TCPMSS=y
CONFIG_IP_NF_MATCH_HELPER=y
CONFIG_IP_NF_MATCH_STATE=y
CONFIG_IP_NF_MATCH_CONNTRACK=y
CONFIG_IP_NF_MATCH_OWNER=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_SAME=y
# CONFIG_IP_NF_NAT_LOCAL is not set
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_TOS=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_DSCP=y
CONFIG_IP_NF_TARGET_MARK=y
CONFIG_IP_NF_TARGET_CLASSIFY=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_IP_NF_TARGET_TCPMSS=y
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_RAW=m
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
# CONFIG_TYPHOON is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=m
# CONFIG_EEPRO100_PIO is not set
CONFIG_E100=m
# CONFIG_E100_NAPI is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
# CONFIG_QIC02_TAPE is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# I2C support
#
CONFIG_I2C=y
# CONFIG_I2C_CHARDEV is not set

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_ISA is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set

#
# Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set

#
# Other I2C Chip support
#
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=y

#
# Video For Linux
#

#
# Video Adapters
#
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set

#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m

#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_VIDEO_SELECT is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set

#
# Logo configuration
#
# CONFIG_LOGO is not set

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
CONFIG_SND_FM801=m
# CONFIG_SND_FM801_TEA575X is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_VIA82XX=m
# CONFIG_SND_VX222 is not set

#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set

#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
CONFIG_USB_EGALAX=m
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set

#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGETSERVO=m
# CONFIG_USB_TEST is not set

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-2"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_4KSTACKS is not set

#
# Security options
#
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y

-----

dmesg output:

Linux version 2.6.8-love2 (root@darkstar303) (gcc version 3.3.4) #1 Sun Jul 25 01:03:15 EEST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65520
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61424 pages, LIFO batch:14
HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI: RSDP (v000 KT266A ) @ 0x000f73f0
ACPI: RSDT (v001 KT266A AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000
ACPI: FADT (v001 KT266A AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040
ACPI: DSDT (v001 KT266A AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
Built 1 zonelists
Kernel command line: BOOT_IMAGE=Slack268 ro root=304 hdc=ide-scsi hdd=ide-scsi
ide_setup: hdc=ide-scsi
ide_setup: hdd=ide-scsi
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 1300.668 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 254892k/262080k available (2623k kernel code, 6492k reserved, 1032k data, 160k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 2555.90 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383f9ff c1c3f9ff 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff c1c3f9ff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 64K (64 bytes/line)
CPU: After all inits, caps: 0383f9ff c1c3f9ff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Duron(tm) processor stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb0d0, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:0a.1[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:11.1[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:11.2[D] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:11.3[D] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
vesafb: probe of vesafb0 failed with error -6
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.15 [Flags: R/W].
udf: registering filesystem
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Fan [FAN] (on)
ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states)
ACPI: Thermal Zone [THRM] (37 C)
lp: driver loaded but no devices found
Real Time Clock Driver v1.12
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 (0x778) [PCSPP(,...)]
parport0: irq 7 detected
lp0: using parport0 (polling).
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
Linux video capture interface: v1.00
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI interrupt 0000:00:11.1[A] -> GSI 11 (level, low) -> IRQ 11
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST360020A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: SAMSUNG CDRW/DVD SM-348B, ATAPI CD/DVD-ROM drive
hdd: 4X4X32, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: hda1 hda2 hda3 < hda5 hda6 > hda4
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:11.2[D] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:11.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:11.2: irq 11, io base 0000e000
uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:11.3[D] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:11.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:11.3: irq 11, io base 0000e400
uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
Advanced Linux Sound Architecture Driver Version 1.0.4 (Mon May 17 14:31:44 2004 UTC).
ALSA device list:
No soundcards found.
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
ip_conntrack version 2.1 (2047 buckets, 16376 max) - 296 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
ReiserFS: hda4: found reiserfs format "3.6" with standard journal
usb 1-2: new low speed USB device using address 2
drivers/usb/input/hid-core.c: ctrl urb status -32 received
input: USB HID v1.00 Gamepad [0458:1002] on usb-0000:00:11.2-2
ReiserFS: hda4: using ordered data mode
ReiserFS: hda4: journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda4: checking transaction log (hda4)
ReiserFS: hda4: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 160k freed
Adding 136512k swap on /dev/hda5. Priority:-1 extents:1
ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: SAMSUNG Model: CDRW/DVD SM-348B Rev: X506
Type: CD-ROM ANSI SCSI revision: 02
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 5
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: ATAPI Model: CD-R/RW 4X4X32 Rev: 3.IS
Type: CD-ROM ANSI SCSI revision: 02
sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr1 at scsi1, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 5
NTFS-fs warning (device hda1): ntfs_fill_super(): Atime updates are not implemented yet. Disabling them.
NTFS volume version 3.1.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS-fs warning (device hda6): ntfs_fill_super(): Atime updates are not implemented yet. Disabling them.
NTFS volume version 3.1.
ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 11 (level, low) -> IRQ 11
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 11 (level, low) -> IRQ 11
eth0: OEM i82557/i82558 10/100 Ethernet, 00:90:27:A0:C8:FE, IRQ 11.
Board assembly 734938-001, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
ACPI: PCI interrupt 0000:00:0a.1[A] -> GSI 11 (level, low) -> IRQ 11
bttv: driver version 0.9.15 loaded
bttv: using 4 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 11, latency: 32, mmio: 0xe9101000
bttv0: using: Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF [card=78,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=003fffff [init]
bttv0: using tuner=5
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tuner: chip found at addr 0xc0 i2c-bus bt878 #0 [sw]
tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) by bt878 #0 [sw]
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
nvidia: module license 'NVIDIA' taints kernel.
0: nvidia: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-5336 Wed Jan 14 18:29:26 PST 2004
Shorewall:net2all:DROP:IN=eth0 OUT= MAC=00:90:27:a0:c8:fe:00:02:44:66:0e:c8:08:00 SRC=193.227.14.33 DST=193.231.163.92 LEN=48 TOS=0x00 PREC=0x00 TTL=110 ID=23683 DF PROTO=TCP SPT=2581 DPT=1025 WINDOW=65535 RES=0x00 SYN URGP=0
Shorewall:net2all:DROP:IN=eth0 OUT= MAC=00:90:27:a0:c8:fe:00:02:44:66:0e:c8:08:00 SRC=193.227.14.33 DST=193.231.163.92 LEN=48 TOS=0x00 PREC=0x00 TTL=109 ID=24349 DF PROTO=TCP SPT=2581 DPT=1025 WINDOW=65535 RES=0x00 SYN URGP=0

-----

/var/log/Xorg.0.log:

Release Date: 18 December 2003
X Protocol Version 11, Revision 0, Release 6.7
Build Operating System: Linux 2.4.26 i686 [ELF]
Current Operating System: Linux darkstar303 2.6.8-love2 #1 Sun Jul 25 01:03:15 EEST 2004 i686
Build Date: 05 June 2004
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 25 01:17:41 2004
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "IBM G72"
(**) | |-->Device "Guillemot Maxi Gamer Xentor"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) XKB: rules: "xorg"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "us_intl"
(**) XKB: layout: "us_intl"
(==) Keyboard: CustomKeycode disabled
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/local/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local/").
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/100dpi/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/100dpi/").
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/cyrillic/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/cyrillic/").
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/100dpi/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/100dpi/").
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/75dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(++) using VT number 7

(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80010044, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3099 card 1019,0996 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b099 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0a:0: chip 109e,036e card 0000,0000 rev 11 class 04,00,00 hdr 80
(II) PCI: 00:0a:1: chip 109e,0878 card 0000,0000 rev 11 class 04,80,00 hdr 80
(II) PCI: 00:0b:0: chip 8086,1229 card 8086,000e rev 08 class 02,00,00 hdr 00
(II) PCI: 00:0c:0: chip 1319,0801 card 1489,7008 rev b2 class 04,01,00 hdr 80
(II) PCI: 00:0c:1: chip 1319,0802 card 1489,7009 rev b2 class 09,80,00 hdr 80
(II) PCI: 00:11:0: chip 1106,3147 card 1019,0997 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:11:2: chip 1106,3038 card 0925,1234 rev 23 class 0c,03,00 hdr 00
(II) PCI: 00:11:3: chip 1106,3038 card 0925,1234 rev 23 class 0c,03,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0028 card 14af,5810 rev 11 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe6000000 - 0xe7ffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe4000000 - 0xe5ffffff (0x2000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI: (0:10:0) Brooktree Corporation Bt878 Video Capture rev 17, Mem @ 0xe9101000/12
(--) PCI:*(1:0:0) nVidia Corporation NV5 [RIVA TNT2/TNT2 Pro] rev 17, Mem @ 0xe6000000/24, 0xe4000000/25
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000

[quote:50301fe38e="selli"]Tippek:
Xorg.conf-ba

Section "Module" ba ird be:

Load "extmod"

ez betolti a xvideo ext-et ( amit nem ertek, mert az xvinfo alapjan be van toltve)

A kernel config honnan van ? 2.4 bol masoltad at ?

Van benne egy csomo felesleges dolog:
pl minek ACPI es APM egyszerre ?
esetleg probald ki az kerneles apggart-ot ( kernelbe beleforgatni +

Section "monitor"-ba:
Option "NvAGP" "2"

Frame buffer szedd ki !

Es szertintem dobalj ki minden folosleges dolgot a kernelbol. !!!

Köszi, ma megprobe.
ACPI-vel meg lehet csinálni, hogy suspend-eljen a monitor? Framebuffer az most bele van fordítva, de csak svga, s nincs használva, ergo vga=normal-al indul a kernel, nincs fb. konzol. A konfigot én csináltam, nem másoltam sehonnan. Asszem éjjelfele lesz inkább idõm.

[quote:7fc615c6ca="vmiklos"]ne csináld ész nélkül. csak ott módosíts, ahol kell
btw leg1xűbb, ha újraindulsz miután módosítottad a configot, hiszen azt az udev az eszközfájl létrehozásánál olvassa be

Rosszul fejeztem ki magam, oda tettem 0666-ot, ahová kellett, pl. /dev/nvidia*, /dev/video*, /dev/mixer0

[quote:194e68d788="doc"][quote:194e68d788="kubi"]Az xavtv-t grabdisplay-ra kell allitanom, hogy legyen kepe

nekem az xorg.conf-ba egy Load "v4l" oldotta meg

A v4l nálam bele van fordítva a kernelbe. Az lehet a ludas?

Megtörtént, tvtuner probléma kilõve, megy, köszi.
Másik probléma:
eddie303@darkstar303:~$ supertux
Datadir: /usr/local/bin/../share/supertux
Error: Could not open /dev/nvidiactl because the permissions
are too resticitive. Please see the FREQUENTLY ASKED QUESTIONS
section of /usr/share/doc/NVIDIA_GLX-1.0/README for steps
to correct.
eddie303@darkstar303:~$ ls -l /dev/nvidia*
crw-rw---- 1 root video 195, 0 2004-07-27 12:32 /dev/nvidia0
crw-rw---- 1 root video 195, 1 2004-07-27 12:32 /dev/nvidia1
crw-rw---- 1 root video 195, 255 2004-07-27 12:32 /dev/nvidiactl

...
/etc/udev/permissions.d/udev.permissions

# dri devices
nvidia*:root:video:0666
nvidiactl:root:video:0666

Ez mitõl lehet?
Az 1. 0-s mit jelent az engedélynél?

Van még egy problémám: Mióta lefordítottam a 2.6.8-rc2-t, nem enged felhasználóként hozzáférni a /dev/video0 stb. -hez, csak rootként chmod a+rw után. Ujraindítás után hallgat el. Valami megoldás, hogy megmaradjanak a beállítások?

[quote:2f0bd0af11="lacipac"][quote:2f0bd0af11="eddie303"]Van még egy problémám: Mióta lefordítottam a 2.6.8-rc2-t, nem enged felhasználóként hozzáférni a /dev/video0 stb. -hez, csak rootként chmod a+rw után. Ujraindítás után hallgat el. Valami megoldás, hogy megmaradjanak a beállítások?

Gondolom devfs-t használsz, ha ujraindulásnál visszaállnak a jogosultságok.
Két lehetőség van:
1. Ne használj devfs-t
2. a /etc/devfsd.conf állomány végére írj be egy ilyet:
[code:1:2f0bd0af11]CHANGE ^video* PERMISSIONS root.video 660[/code:1:2f0bd0af11]

majd reportold nekünk ha működik/nem_működik

Nem devfs, udev. Ez Slackware, nem hiszem, hogy el lenne ragadtatva a devfs-tõl :)

[quote:e09d2bd7d1="vmiklos"]az udev.permissions módosítása után újraindulál?

Igen, nem is egyszer. Itt az egész perm. file:

# console devices
console:root:tty:0600
tty:root:tty:0666
tty[0-9][0-9]*:root:tty:0660
vc/[0-9]*:root:tty:0660

# pty devices
# Set this to 0660 if you only want users belonging to tty group
# to be able to allocate PTYs
ptmx:root:tty:0666
pty[p-za-e][0-9a-f]*:root:tty:0660
tty[p-za-e][0-9a-f]*:root:tty:0660
pty/m*:root:tty:0660
vc/s*:root:tty:0660

# serial+dialup devices
ttyS*:root:uucp:0660
tts/[0-9]*:root:uucp:0660
ttyUSB*:root:uucp:0660
tts/USB[0-9]*:root:uucp:0660
ppp:root:uucp:0660
ippp*:root:tty:0660
isdn*:root:tty:0660
isdnctrl*:root:tty:0660
capi*:root:tty:0660
dcbri*:root:tty:0660
ircomm*:root:tty:0660

# vc devices
vcs:root:tty:0620
vcs[0-9]*:root:tty:0620
vcsa:root:tty:0620
vcsa[0-9]*:root:tty:0620
vcc/*:root:tty:0620

# memory devices
random:root:root:0644
urandom:root:root:0644
mem:root:kmem:0640
kmem:root:kmem:0640
port:root:kmem:0640
full:root:root:0666
null:root:root:0666
zero:root:root:0666

# misc devices
misc/nvram:root:root:0660
misc/rtc:root:root:0664
misc/psaux:root:sys:0660

# floppy devices
floppy/[0-3]:root:floppy:0660

# audio devices
dsp*:root:audio:0666
audio*:root:audio:0666
midi*:root:audio:0666
mixer*:root:audio:0666
sequencer*:root:audio:0666
sound/*:root:audio:0666
snd/control*:root:audio:0666
snd/midi*:root:audio:0666
snd/pcm*p:root:audio:0666
snd/seq:root:audio:0666
snd/timer:root:audio:0666
snd/hw*:root:audio:0666
snd/pcm*c:root:audio:0666
beep:root:audio:0666
admm*:root:audio:0666
adsp*:root:audio:0666
aload*:root:audio:0666
amidi*:root:audio:0666
dmfm*:root:audio:0666
dmmidi*:root:audio:0666
sndstat:root:audio:0666

# optical devices
sr*:root:cdrom:666
scd*:root:cdrom:666
pcd*:root:cdrom:0660
cdrom*:root:cdrom:0666
dvd:root:cdrom:0660
rdvd:root:cdrom:0660
cdroms/*:root:cdrom:0660

# pilot/palm devices
pilot:root:uucp:0660

# jaz devices
jaz*:root:disk:0660

# zip devices
pocketzip*:root:disk:0660
zip*:root:disk:0660

# ls120 devices
ls120:root:disk:0660
ls120*:root:disk:0660

# lp devices
lp*:root:lp:0660
parport*:root:lp:0660
irlpt*:root:lp:0660
usblp*:root:lp:0660
usb/lp*:root:lp:0660

# scanner devices
scanner:root:root:0600
usb/scanner*:root:root:0600

# camera devices
camera*:root:root:0600
usb/dc2xx*:root:root:0600
usb/mdc800*:root:root:0600

# raw devices
ram*:root:disk:660
raw/*:root:disk:660

# disk devices
hd*:root:disk:660
sd*:root:disk:660
dasd*:root:disk:660
ataraid*:root:disk:660
loop*:root:disk:660
md*:root:disk:660
ide/*/*/*/*/*:root:disk:660
discs/*/*:root:disk:660
loop/*:root:disk:660
md/*:root:disk:660

# tape devices
ht*:root:sys:0660
nht*:root:sys:0660
pt[0-9]*:root:sys:0660
npt*:root:sys:0660
st*:root:sys:0660
nst*:root:sys:0660

# dm devices
dm-*:root:root:0640

# memstick devices
memstick*:root:root:0600

# flash devices
flash*:root:root:0600

# diskonkey devices
diskonkey*:root:disk:0660

# rem_ide devices
microdrive*:root:disk:0660

# fb devices
fb:root:root:0600
fb[0-9]*:root:root:0600
fb/*:root:root:0600

# kbd devices
kbd:root:root:0644

# joystick devices
js[0-9]*:root:root:0666
djs[0-9]*:root:root:0644

# video4linux devices
video*:root:video:0666
radio*:root:video:0666
winradio*:root:video:0666
vtx*:root:video:0666
vbi*:root:video:0666
video/*:root:video:0666
vttuner:root:video:0666
v4l/*:root:video:0666

# input devices
input/*:root:root:644

# gpm devices
gpmctl:root:root:0700

# dri devices
nvidia*:root:video:0666
nvidiactl:root:video:0666
3dfx*:root:video:0666
dri/*:root:video:0666

# mainboard devices
apm_bios:root:root:0600

# scsi devices
sr*:root:disk:0666
sg*:root:disk:0666
pg*:root:disk:0660
cdwriter:root:disk:0660

# usb devices
usb/dabusb*:root:sys:0660
usb/mdc800*:root:sys:0660
usb/rio500:root:sys:0660

sgi_fetchop:root:root:666
iseries/vcd*:root:disk:660
iseries/vd*:root:disk:660

[quote:9b86872bcb="vmiklos"]ez a /etc/udev/permissions.d/udev.permissions fájl?
mert nagyon úgy néz ki, h nem azt a fájlt módosítod, amit ő megnéz a jogok miatt 8O

Az a fájl...
Cifra, mert akkor nem tudom, honnan derítsem ki.

/var/log/messages | greep udev : innen kivettem mindent, ami nem mára vonatkozik, de nem sokat látok így se:

Jul 27 09:33:03 darkstar303 udev[2707]: configured rule in '/etc/udev/rules.d/udev.rules' at line 24 applied, 'sr0' becomes '%k'
Jul 27 09:33:03 darkstar303 udev[2707]: creating device node '/dev/sr0'
Jul 27 09:33:03 darkstar303 udev[2709]: configured rule in '/etc/udev/rules.d/udev.rules' at line 24 applied, 'sg0' becomes '%k'
Jul 27 09:33:03 darkstar303 udev[2709]: creating device node '/dev/sg0'
Jul 27 09:33:04 darkstar303 udev[2712]: configured rule in '/etc/udev/rules.d/udev.rules' at line 24 applied, 'sr1' becomes '%k'
Jul 27 09:33:04 darkstar303 udev[2712]: creating device node '/dev/sr1'
Jul 27 09:33:04 darkstar303 udev[2715]: configured rule in '/etc/udev/rules.d/udev.rules' at line 31 applied, 'hwC0D0' becomes 'snd/%k'
Jul 27 09:33:04 darkstar303 udev[2715]: creating device node '/dev/snd/hwC0D0'
Jul 27 09:33:04 darkstar303 udev[2717]: configured rule in '/etc/udev/rules.d/udev.rules' at line 33 applied, 'midiC0D0' becomes 'snd/%k'
Jul 27 09:33:04 darkstar303 udev[2717]: creating device node '/dev/snd/midiC0D0'
Jul 27 09:33:04 darkstar303 udev[2714]: configured rule in '/etc/udev/rules.d/udev.rules' at line 24 applied, 'sg1' becomes '%k'
Jul 27 09:33:04 darkstar303 udev[2714]: creating device node '/dev/sg1'
Jul 27 09:33:04 darkstar303 udev[2720]: configured rule in '/etc/udev/rules.d/udev.rules' at line 32 applied, 'pcmC0D0p' becomes 'snd/%k'
Jul 27 09:33:04 darkstar303 udev[2720]: creating device node '/dev/snd/pcmC0D0p'
Jul 27 09:33:04 darkstar303 udev[2721]: configured rule in '/etc/udev/rules.d/udev.rules' at line 32 applied, 'pcmC0D0c' becomes 'snd/%k'
Jul 27 09:33:04 darkstar303 udev[2721]: creating device node '/dev/snd/pcmC0D0c'
Jul 27 09:33:04 darkstar303 udev[2703]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, added symlink '%k'
Jul 27 09:33:04 darkstar303 udev[2703]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, 'vcs1' becomes 'vcc/%n'
Jul 27 09:33:04 darkstar303 udev[2703]: creating device node '/dev/vcc/1'
Jul 27 09:33:04 darkstar303 udev[2704]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, added symlink '%k'
Jul 27 09:33:04 darkstar303 udev[2704]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, 'vcsa1' becomes 'vcc/a%n'
Jul 27 09:33:04 darkstar303 udev[2704]: creating device node '/dev/vcc/a1'
Jul 27 09:33:04 darkstar303 udev[2729]: configured rule in '/etc/udev/rules.d/udev.rules' at line 32 applied, 'pcmC1D0c' becomes 'snd/%k'
Jul 27 09:33:04 darkstar303 udev[2729]: creating device node '/dev/snd/pcmC1D0c'
Jul 27 09:33:04 darkstar303 udev[2740]: removing device node '/dev/vcc/1'
Jul 27 09:33:04 darkstar303 udev[2741]: removing device node '/dev/vcc/a1'
Jul 27 09:33:04 darkstar303 udev[2716]: creating device node '/dev/dmfm'
Jul 27 09:33:04 darkstar303 udev[2727]: configured rule in '/etc/udev/rules.d/udev.rules' at line 32 applied, 'pcmC1D1c' becomes 'snd/%k'
Jul 27 09:33:04 darkstar303 udev[2727]: creating device node '/dev/snd/pcmC1D1c'
Jul 27 09:33:04 darkstar303 udev[2737]: configured rule in '/etc/udev/rules.d/udev.rules' at line 103 applied, added symlink '%k'
Jul 27 09:33:04 darkstar303 udev[2737]: configured rule in '/etc/udev/rules.d/udev.rules' at line 103 applied, 'video0' becomes 'v4l/video%n'
Jul 27 09:33:04 darkstar303 udev[2737]: creating device node '/dev/v4l/video0'
Jul 27 09:33:04 darkstar303 udev[2718]: creating device node '/dev/midi'
Jul 27 09:33:04 darkstar303 udev[2719]: creating device node '/dev/dmmidi'
Jul 27 09:33:04 darkstar303 udev[2723]: configured rule in '/etc/udev/rules.d/udev.rules' at line 82 applied, added symlink '%k'
Jul 27 09:33:04 darkstar303 udev[2723]: configured rule in '/etc/udev/rules.d/udev.rules' at line 82 applied, 'audio' becomes 'sound/%k'
Jul 27 09:33:04 darkstar303 udev[2723]: creating device node '/dev/sound/audio'
Jul 27 09:33:04 darkstar303 udev[2724]: configured rule in '/etc/udev/rules.d/udev.rules' at line 86 applied, added symlink '%k'
Jul 27 09:33:04 darkstar303 udev[2724]: configured rule in '/etc/udev/rules.d/udev.rules' at line 86 applied, 'mixer' becomes 'sound/%k'
Jul 27 09:33:04 darkstar303 udev[2724]: creating device node '/dev/sound/mixer'
Jul 27 09:33:04 darkstar303 udev[2726]: configured rule in '/etc/udev/rules.d/udev.rules' at line 30 applied, 'controlC1' becomes 'snd/%k'
Jul 27 09:33:04 darkstar303 udev[2726]: creating device node '/dev/snd/controlC1'
Jul 27 09:33:04 darkstar303 udev[2738]: configured rule in '/etc/udev/rules.d/udev.rules' at line 105 applied, added symlink '%k'
Jul 27 09:33:04 darkstar303 udev[2738]: configured rule in '/etc/udev/rules.d/udev.rules' at line 105 applied, 'vbi0' becomes 'v4l/vbi%n'
Jul 27 09:33:04 darkstar303 udev[2738]: creating device node '/dev/v4l/vbi0'
Jul 27 09:33:04 darkstar303 udev[2739]: configured rule in '/etc/udev/rules.d/udev.rules' at line 104 applied, added symlink '%k'
Jul 27 09:33:04 darkstar303 udev[2739]: configured rule in '/etc/udev/rules.d/udev.rules' at line 104 applied, 'radio0' becomes 'v4l/radio%n'
Jul 27 09:33:04 darkstar303 udev[2739]: creating device node '/dev/v4l/radio0'
Jul 27 09:33:04 darkstar303 udev[2728]: configured rule in '/etc/udev/rules.d/udev.rules' at line 81 applied, added symlink '%k'
Jul 27 09:33:04 darkstar303 udev[2728]: configured rule in '/etc/udev/rules.d/udev.rules' at line 81 applied, 'adsp1' becomes 'sound/%k'
Jul 27 09:33:04 darkstar303 udev[2728]: creating device node '/dev/sound/adsp1'
Jul 27 09:33:04 darkstar303 udev[2733]: configured rule in '/etc/udev/rules.d/udev.rules' at line 83 applied, added symlink '%k'
Jul 27 09:33:04 darkstar303 udev[2733]: configured rule in '/etc/udev/rules.d/udev.rules' at line 83 applied, 'audio1' becomes 'sound/%k'
Jul 27 09:33:04 darkstar303 udev[2733]: creating device node '/dev/sound/audio1'
Jul 27 09:33:04 darkstar303 udev[2734]: configured rule in '/etc/udev/rules.d/udev.rules' at line 87 applied, added symlink '%k'
Jul 27 09:33:04 darkstar303 udev[2734]: configured rule in '/etc/udev/rules.d/udev.rules' at line 87 applied, 'mixer1' becomes 'sound/%k'
Jul 27 09:33:04 darkstar303 udev[2734]: creating device node '/dev/sound/mixer1'
Jul 27 09:33:04 darkstar303 udev[2742]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, added symlink '%k'
Jul 27 09:33:04 darkstar303 udev[2742]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, 'vcs1' becomes 'vcc/%n'
Jul 27 09:33:04 darkstar303 udev[2742]: creating device node '/dev/vcc/1'
Jul 27 09:33:04 darkstar303 udev[2743]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, added symlink '%k'
Jul 27 09:33:04 darkstar303 udev[2743]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, 'vcsa1' becomes 'vcc/a%n'
Jul 27 09:33:04 darkstar303 udev[2743]: creating device node '/dev/vcc/a1'
Jul 27 09:33:04 darkstar303 udev[2722]: configured rule in '/etc/udev/rules.d/udev.rules' at line 84 applied, added symlink '%k'
Jul 27 09:33:04 darkstar303 udev[2722]: configured rule in '/etc/udev/rules.d/udev.rules' at line 84 applied, 'dsp' becomes 'sound/%k'
Jul 27 09:33:04 darkstar303 udev[2722]: creating device node '/dev/sound/dsp'
Jul 27 09:33:04 darkstar303 udev[2755]: removing device node '/dev/vcc/1'
Jul 27 09:33:04 darkstar303 udev[2756]: removing device node '/dev/vcc/a1'
Jul 27 09:33:04 darkstar303 udev[2730]: configured rule in '/etc/udev/rules.d/udev.rules' at line 85 applied, added symlink '%k'
Jul 27 09:33:04 darkstar303 udev[2730]: configured rule in '/etc/udev/rules.d/udev.rules' at line 85 applied, 'dsp1' becomes 'sound/%k'
Jul 27 09:33:04 darkstar303 udev[2730]: creating device node '/dev/sound/dsp1'
Jul 27 09:33:04 darkstar303 udev[2757]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, added symlink '%k'
Jul 27 09:33:04 darkstar303 udev[2757]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, 'vcs1' becomes 'vcc/%n'
Jul 27 09:33:04 darkstar303 udev[2757]: creating device node '/dev/vcc/1'
Jul 27 09:33:04 darkstar303 udev[2759]: removing device node '/dev/vcc/1'
Jul 27 09:33:04 darkstar303 udev[2758]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, added symlink '%k'
Jul 27 09:33:04 darkstar303 udev[2758]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, 'vcsa1' becomes 'vcc/a%n'
Jul 27 09:33:04 darkstar303 udev[2758]: creating device node '/dev/vcc/a1'
Jul 27 09:33:04 darkstar303 udev[2761]: removing device node '/dev/vcc/a1'
Jul 27 09:33:04 darkstar303 udev[2760]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, added symlink '%k'
Jul 27 09:33:04 darkstar303 udev[2760]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, 'vcs1' becomes 'vcc/%n'
Jul 27 09:33:04 darkstar303 udev[2760]: creating device node '/dev/vcc/1'
Jul 27 09:33:04 darkstar303 udev[2763]: removing device node '/dev/vcc/1'
Jul 27 09:33:04 darkstar303 udev[2762]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, added symlink '%k'
Jul 27 09:33:04 darkstar303 udev[2762]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, 'vcsa1' becomes 'vcc/a%n'
Jul 27 09:33:04 darkstar303 udev[2762]: creating device node '/dev/vcc/a1'
Jul 27 09:33:04 darkstar303 udev[2765]: removing device node '/dev/vcc/a1'
Jul 27 09:33:04 darkstar303 udev[2764]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, added symlink '%k'
Jul 27 09:33:04 darkstar303 udev[2764]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, 'vcs1' becomes 'vcc/%n'
Jul 27 09:33:04 darkstar303 udev[2764]: creating device node '/dev/vcc/1'
Jul 27 09:33:04 darkstar303 udev[2767]: removing device node '/dev/vcc/1'
Jul 27 09:33:04 darkstar303 udev[2766]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, added symlink '%k'
Jul 27 09:33:04 darkstar303 udev[2766]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, 'vcsa1' becomes 'vcc/a%n'
Jul 27 09:33:04 darkstar303 udev[2766]: creating device node '/dev/vcc/a1'
Jul 27 09:33:04 darkstar303 udev[2769]: removing device node '/dev/vcc/a1'
Jul 27 09:33:04 darkstar303 udev[2768]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, added symlink '%k'
Jul 27 09:33:04 darkstar303 udev[2768]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, 'vcs1' becomes 'vcc/%n'
Jul 27 09:33:04 darkstar303 udev[2768]: creating device node '/dev/vcc/1'
Jul 27 09:33:04 darkstar303 udev[2771]: removing device node '/dev/vcc/1'
Jul 27 09:33:04 darkstar303 udev[2770]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, added symlink '%k'
Jul 27 09:33:04 darkstar303 udev[2770]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, 'vcsa1' becomes 'vcc/a%n'
Jul 27 09:33:04 darkstar303 udev[2770]: creating device node '/dev/vcc/a1'
Jul 27 09:33:04 darkstar303 udev[2773]: removing device node '/dev/vcc/a1'
Jul 27 09:33:04 darkstar303 udev[2772]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, added symlink '%k'
Jul 27 09:33:04 darkstar303 udev[2772]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, 'vcs1' becomes 'vcc/%n'
Jul 27 09:33:04 darkstar303 udev[2772]: creating device node '/dev/vcc/1'
Jul 27 09:33:04 darkstar303 udev[2775]: removing device node '/dev/vcc/1'
Jul 27 09:33:04 darkstar303 udev[2774]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, added symlink '%k'
Jul 27 09:33:04 darkstar303 udev[2774]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, 'vcsa1' becomes 'vcc/a%n'
Jul 27 09:33:04 darkstar303 udev[2774]: creating device node '/dev/vcc/a1'
Jul 27 09:33:04 darkstar303 udev[2777]: removing device node '/dev/vcc/a1'
Jul 27 09:33:05 darkstar303 udev[2776]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, added symlink '%k'
Jul 27 09:33:05 darkstar303 udev[2776]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, 'vcs1' becomes 'vcc/%n'
Jul 27 09:33:05 darkstar303 udev[2776]: creating device node '/dev/vcc/1'
Jul 27 09:33:05 darkstar303 udev[2779]: removing device node '/dev/vcc/1'
Jul 27 09:33:05 darkstar303 udev[2778]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, added symlink '%k'
Jul 27 09:33:05 darkstar303 udev[2778]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, 'vcsa1' becomes 'vcc/a%n'
Jul 27 09:33:05 darkstar303 udev[2778]: creating device node '/dev/vcc/a1'
Jul 27 09:33:05 darkstar303 udev[2781]: removing device node '/dev/vcc/a1'
Jul 27 09:33:05 darkstar303 udev[2780]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, added symlink '%k'
Jul 27 09:33:05 darkstar303 udev[2780]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, 'vcs1' becomes 'vcc/%n'
Jul 27 09:33:05 darkstar303 udev[2780]: creating device node '/dev/vcc/1'
Jul 27 09:33:05 darkstar303 udev[2783]: removing device node '/dev/vcc/1'
Jul 27 09:33:05 darkstar303 udev[2782]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, added symlink '%k'
Jul 27 09:33:05 darkstar303 udev[2782]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, 'vcsa1' becomes 'vcc/a%n'
Jul 27 09:33:05 darkstar303 udev[2782]: creating device node '/dev/vcc/a1'
Jul 27 09:33:05 darkstar303 udev[2785]: removing device node '/dev/vcc/a1'
Jul 27 09:33:05 darkstar303 udev[2784]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, added symlink '%k'
Jul 27 09:33:05 darkstar303 udev[2784]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, 'vcs1' becomes 'vcc/%n'
Jul 27 09:33:05 darkstar303 udev[2784]: creating device node '/dev/vcc/1'
Jul 27 09:33:05 darkstar303 udev[2787]: removing device node '/dev/vcc/1'
Jul 27 09:33:05 darkstar303 udev[2786]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, added symlink '%k'
Jul 27 09:33:05 darkstar303 udev[2786]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, 'vcsa1' becomes 'vcc/a%n'
Jul 27 09:33:05 darkstar303 udev[2786]: creating device node '/dev/vcc/a1'
Jul 27 09:33:05 darkstar303 udev[2789]: removing device node '/dev/vcc/a1'
Jul 27 09:33:05 darkstar303 udev[2788]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, added symlink '%k'
Jul 27 09:33:05 darkstar303 udev[2788]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, 'vcs1' becomes 'vcc/%n'
Jul 27 09:33:05 darkstar303 udev[2788]: creating device node '/dev/vcc/1'
Jul 27 09:33:05 darkstar303 udev[2791]: removing device node '/dev/vcc/1'
Jul 27 09:33:05 darkstar303 udev[2790]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, added symlink '%k'
Jul 27 09:33:05 darkstar303 udev[2790]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, 'vcsa1' becomes 'vcc/a%n'
Jul 27 09:33:05 darkstar303 udev[2790]: creating device node '/dev/vcc/a1'
Jul 27 09:33:05 darkstar303 udev[2793]: removing device node '/dev/vcc/a1'
Jul 27 09:33:05 darkstar303 udev[2792]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, added symlink '%k'
Jul 27 09:33:05 darkstar303 udev[2792]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, 'vcs1' becomes 'vcc/%n'
Jul 27 09:33:05 darkstar303 udev[2792]: creating device node '/dev/vcc/1'
Jul 27 09:33:05 darkstar303 udev[2794]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, added symlink '%k'
Jul 27 09:33:05 darkstar303 udev[2794]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, 'vcsa1' becomes 'vcc/a%n'
Jul 27 09:33:05 darkstar303 udev[2794]: creating device node '/dev/vcc/a1'
Jul 27 09:33:31 darkstar303 udev[2989]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, added symlink '%k'
Jul 27 09:33:31 darkstar303 udev[2989]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, 'vcsa3' becomes 'vcc/a%n'
Jul 27 09:33:31 darkstar303 udev[2989]: creating device node '/dev/vcc/a3'
Jul 27 09:33:31 darkstar303 udev[2913]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, added symlink '%k'
Jul 27 09:33:31 darkstar303 udev[2913]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, 'vcs2' becomes 'vcc/%n'
Jul 27 09:33:31 darkstar303 udev[2913]: creating device node '/dev/vcc/2'
Jul 27 09:33:31 darkstar303 udev[2921]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, added symlink '%k'
Jul 27 09:33:31 darkstar303 udev[2921]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, 'vcsa2' becomes 'vcc/a%n'
Jul 27 09:33:31 darkstar303 udev[2921]: creating device node '/dev/vcc/a2'
Jul 27 09:33:31 darkstar303 udev[2929]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, added symlink '%k'
Jul 27 09:33:31 darkstar303 udev[2929]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, 'vcs4' becomes 'vcc/%n'
Jul 27 09:33:31 darkstar303 udev[2929]: creating device node '/dev/vcc/4'
Jul 27 09:33:31 darkstar303 udev[2937]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, added symlink '%k'
Jul 27 09:33:31 darkstar303 udev[2937]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, 'vcs5' becomes 'vcc/%n'
Jul 27 09:33:31 darkstar303 udev[2937]: creating device node '/dev/vcc/5'
Jul 27 09:33:31 darkstar303 udev[2945]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, added symlink '%k'
Jul 27 09:33:31 darkstar303 udev[2945]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, 'vcsa4' becomes 'vcc/a%n'
Jul 27 09:33:31 darkstar303 udev[2945]: creating device node '/dev/vcc/a4'
Jul 27 09:33:31 darkstar303 udev[2953]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, added symlink '%k'
Jul 27 09:33:31 darkstar303 udev[2953]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, 'vcs6' becomes 'vcc/%n'
Jul 27 09:33:31 darkstar303 udev[2953]: creating device node '/dev/vcc/6'
Jul 27 09:33:31 darkstar303 udev[2961]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, added symlink '%k'
Jul 27 09:33:31 darkstar303 udev[2961]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, 'vcsa5' becomes 'vcc/a%n'
Jul 27 09:33:31 darkstar303 udev[2961]: creating device node '/dev/vcc/a5'
Jul 27 09:33:31 darkstar303 udev[2969]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, added symlink '%k'
Jul 27 09:33:31 darkstar303 udev[2969]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, 'vcsa6' becomes 'vcc/a%n'
Jul 27 09:33:31 darkstar303 udev[2969]: creating device node '/dev/vcc/a6'
Jul 27 09:33:32 darkstar303 udev[2977]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, added symlink '%k'
Jul 27 09:33:32 darkstar303 udev[2977]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, 'vcs3' becomes 'vcc/%n'
Jul 27 09:33:32 darkstar303 udev[2977]: creating device node '/dev/vcc/3'
Jul 27 09:33:32 darkstar303 udev[3006]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, added symlink '%k'
Jul 27 09:33:32 darkstar303 udev[3006]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, 'vcs7' becomes 'vcc/%n'
Jul 27 09:33:32 darkstar303 udev[3006]: creating device node '/dev/vcc/7'
Jul 27 09:33:32 darkstar303 udev[3044]: removing device node '/dev/vcc/7'
Jul 27 09:33:32 darkstar303 udev[3014]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, added symlink '%k'
Jul 27 09:33:32 darkstar303 udev[3014]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, 'vcsa7' becomes 'vcc/a%n'
Jul 27 09:33:32 darkstar303 udev[3014]: creating device node '/dev/vcc/a7'
Jul 27 09:33:32 darkstar303 udev[3046]: removing device node '/dev/vcc/a7'
Jul 27 09:33:32 darkstar303 udev[3045]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, added symlink '%k'
Jul 27 09:33:32 darkstar303 udev[3045]: configured rule in '/etc/udev/rules.d/udev.rules' at line 98 applied, 'vcs7' becomes 'vcc/%n'
Jul 27 09:33:32 darkstar303 udev[3045]: creating device node '/dev/vcc/7'
Jul 27 09:33:32 darkstar303 udev[3047]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, added symlink '%k'
Jul 27 09:33:32 darkstar303 udev[3047]: configured rule in '/etc/udev/rules.d/udev.rules' at line 100 applied, 'vcsa7' becomes 'vcc/a%n'
Jul 27 09:33:32 darkstar303 udev[3047]: creating device node '/dev/vcc/a7'
root@darkstar303:/home/eddie303#

Most nézem, hogy /etc/udev/udev.conf-ban az udev_permissions="/etc/udev/permissions.d"
Elvileg jó kéne legyen, nem?

[quote:ba0cb733b9="vmiklos"]mivel az 1 könyvtár, azt azt jelenti, h sorba értelmezi e benne lévő cuccokat. de mivel csak 1 config van benne, gyak olyan, mintha megadtad volna a file nevét.
viszont az, h miért nem állítja be a jogokat... gőzöm sincs :oops:
addig is workaroundolni lehet azzal, h a chmod 666 /dev/nvidia* parancsot beteszed a /etc/rc.d/rc.local fájlba :wink:

Hehe, megvan :)
/etc/udev/scripts/make_extra_nodes.sh :

...
# nVidia modules don't know about udev, so a little bit more clutter is in order.
mknod -m 666 /dev/nvidiactl c 195 255
mknod -m 666 /dev/nvidia0 c 195 0
mknod -m 666 /dev/nvidia1 c 195 1
...

Ez lehet, valami slackes különítmény :)

Még egy probléma: ugyancsak SuperTux: Az SDL-nek nem tetszik a joy-om, lehet ezzel tenni valamit?

eddie303@darkstar303:~$ supertux
Datadir: /usr/local/bin/../share/supertux
Warning: Could not open joystick -1.
The Simple DirectMedia error that occured was:
There are 1 joysticks available

Próbáltam root-ként is indítani, úgy se megy :( Az ominózus joy egy USB-s Genius Maxfire G08 pad.

Mivel elsõ hozzászólásom, szeretnék üdvözölni mindenkit, aki a fórumot olvasgatja, és elõre is köszönöm a segítséget, remélem, hogy majd más esetekben én is tudok segíteni másoknak. Mivel újonc vagyok Linuxban, de már nem annyira, hogy Mandrake-et/Suse-t/Fedora/illessze mindenki ide kedvenc agyonautomatizált disztróját - használok, hanem jelenleg Slackware-et, lenne egy gondom.
Lefordítottam a 2.6.8-rc2-es kernelt. Elõtte a slack-es 2.4.26 kernel volt (Slackware 10.0). Már mindent kivettem, amit gondoltam, hogy zavarhatja a videokártyát, kezdve rivafb-tõl, és egyáltalán fb-tõl Preemptible-ig, az a problémám, hogy 1.0.5336-os nvidia driverrel akadozik a tvtime, régebben 2.6.7-es kernellel még katasztrofálisabb volt, ott minden lassú volt. A 6106-os driverrel még rosszabb. A 2.4.26-os eredeti Slack kernellel megy rendesen, de izgatja a fantáziámat, hogy nem megy rendesen a 2.6 ráadásul ment MDK10 alatt a 2.6.3-al. A konfig egy Duron 1300-as, Guillemot Maxi Gamer Xentor 16 MB-os TNT2, Matsonic 8139 KT266 chipsetes alaplap. Ötletek?

Ez valami agyrém :) Elolvastam a válaszaidat (köszi), s bebootoltam a 2.6.8-rc2-vel, hogy tudjam átküldeni az outputot. Paranormális jelenség: Nem jött le a hup.hu, csak a felsõ és a bal frame :) Ez halálkomoly, Konqueror/Netscape, egyik se hozta le. Visszajöttem 2.4.26-al, most megy, pattan. Ilyent nem ettem. Holnap újrafordítom from scratch a 2.6-ost, akkor meg küldom az outputokat.

Up, tanácstalan vagyok :(

[quote:92eeb658f2="vmiklos"]udevnél a /dev egy ramdisk, tehát nyilván elveszik a jog-módosításod, ha újraindulsz :wink:
/etc/udev/udev.permissions/ könyvtárban lesz 1 file, abban kell beállítanod a jogokat. ha vmi nem világos, írj :wink:

Köszi. Nem igazán világos, próbáltam mindenhová 0660 helyett 0666-ot írni, s nem megy, sztem a probléma a szék s a billentyüzet között van (Magyarán bennem), szal kérlek szépen, világosíts fel, ha nem gond Neked.