A helyzet az.hogy a compat-wireless 2.6-ot telepítettem fel. Ahogy az lsusb kilistázta, látja a modemet:
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0cf3:1006 Atheros Communications, Inc. TP-Link TL-WN322G v3 / TL-WN422G v2 802.11g [Atheros AR9271]
A probléma az ar9271.fw-vel van.Először azért reklamált, hogy "ar9271 not found". Aztán rootként bemásoltam a /lib/firmware mappába először a htc_9271.fw-t, ezzel nem indult el, aztán egy "sima" ar9271.fw-t, de azzal sem. De közbeeső lépésként még csináltam, - lásd fentebb - egy harlinket a firmware-n belül a htc_9271-re is ar9271 néven, merthogy így keresi, de ez sem jött be. Ezeket szépen egymás után, egymástól elkülönítve csináltam meg. Most ott tartok, hogy a modem, és vele az internet egyik fw-fájllal sem működik, és itt vagyok meglőve, nem tudom hogyan lépjek tovább.
A dmesg2 eredménye a htc-9271 bemásolása után:
[ 0.398011] pnp: PnP ACPI init
[ 0.398135] ACPI: bus type pnp registered
[ 0.414903] pnp 00:00: [bus 00-ff]
[ 0.414918] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.414930] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.414941] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.414954] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.414965] pnp 00:00: [mem 0x14000000-0xfff7ffff window]
[ 0.414977] pnp 00:00: [mem 0x000d4000-0x000effff window]
[ 0.415488] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.417775] pnp 00:01: [io 0x03f8-0x03ff]
[ 0.417786] ERROR: Unable to locate IOAPIC for GSI 4
[ 0.417852] pnp 00:01: [irq 4]
[ 0.418279] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[ 0.420891] pnp 00:02: [io 0x03f0-0x03f5]
[ 0.420902] pnp 00:02: [io 0x03f7]
[ 0.420911] ERROR: Unable to locate IOAPIC for GSI 6
[ 0.420968] pnp 00:02: [irq 6]
[ 0.420979] pnp 00:02: [dma 2]
[ 0.421312] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.425316] pnp 00:03: [io 0x03e8-0x03ef]
[ 0.425329] pnp 00:03: [io 0x0100-0x0107]
[ 0.425338] ERROR: Unable to locate IOAPIC for GSI 3
[ 0.425395] pnp 00:03: [irq 3]
[ 0.425406] pnp 00:03: [dma 5]
[ 0.425999] pnp 00:03: Plug and Play ACPI device, IDs SMCf010 PNP0510 (active)
[ 0.428805] pnp 00:04: [io 0x0378-0x037f]
[ 0.428817] pnp 00:04: [io 0x0778-0x077a]
[ 0.428826] ERROR: Unable to locate IOAPIC for GSI 7
[ 0.428882] pnp 00:04: [irq 7]
[ 0.428893] pnp 00:04: [dma 3]
[ 0.429439] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.429575] pnp 00:05: [io 0x0010-0x001f]
[ 0.429586] pnp 00:05: [io 0x0024-0x003d]
[ 0.429596] pnp 00:05: [io 0x0050-0x0053]
[ 0.429606] pnp 00:05: [io 0x0063]
[ 0.429615] pnp 00:05: [io 0x0065]
[ 0.429625] pnp 00:05: [io 0x0067]
[ 0.429634] pnp 00:05: [io 0x0074-0x0077]
[ 0.429644] pnp 00:05: [io 0x0090-0x0091]
[ 0.429653] pnp 00:05: [io 0x0092]
[ 0.429663] pnp 00:05: [io 0x0093-0x009f]
[ 0.429673] pnp 00:05: [io 0x00a4-0x00bd]
[ 0.429683] pnp 00:05: [io 0x00e0-0x00e3]
[ 0.430020] pnp 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.430075] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.430085] ERROR: Unable to locate IOAPIC for GSI 13
[ 0.430142] pnp 00:06: [irq 13]
[ 0.430363] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.430432] pnp 00:07: [io 0x0000-0x000f]
[ 0.430443] pnp 00:07: [io 0x0080-0x008f]
[ 0.430453] pnp 00:07: [io 0x00c0-0x00df]
[ 0.430464] pnp 00:07: [dma 4]
[ 0.430690] pnp 00:07: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.430783] pnp 00:08: [io 0x0061]
[ 0.431010] pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.431080] pnp 00:09: [io 0x0070-0x0071]
[ 0.431091] pnp 00:09: [io 0x0072-0x0073]
[ 0.431100] ERROR: Unable to locate IOAPIC for GSI 8
[ 0.431156] pnp 00:09: [irq 8]
[ 0.431380] pnp 00:09: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.431432] pnp 00:0a: [io 0x0060]
[ 0.431442] pnp 00:0a: [io 0x0064]
[ 0.431450] ERROR: Unable to locate IOAPIC for GSI 1
[ 0.431505] pnp 00:0a: [irq 1]
[ 0.431737] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.431841] ERROR: Unable to locate IOAPIC for GSI 12
[ 0.431897] pnp 00:0b: [irq 12]
[ 0.432138] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
[ 0.432266] pnp 00:0c: [io 0x04d0-0x04d1]
[ 0.432277] pnp 00:0c: [io 0x0800-0x087f]
[ 0.432287] pnp 00:0c: [io 0x4000-0x400f]
[ 0.432297] pnp 00:0c: [io 0x5000-0x5063]
[ 0.432307] pnp 00:0c: [io 0x6004-0x6005]
[ 0.432317] pnp 00:0c: [io 0xf000-0xf0cf]
[ 0.432610] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.435694] pnp 00:0d: [mem 0x000d1800-0x000d3fff]
[ 0.435707] pnp 00:0d: [mem 0xfff80000-0xffffffff]
[ 0.435797] pnp 00:0d: disabling [mem 0x000d1800-0x000d3fff] because it overlaps 0000:00:09.0 BAR 6 [mem 0x00000000-0x000fffff pref]
[ 0.436140] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.437308] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[ 0.437321] pnp 00:0e: [mem 0x000f0000-0x000fffff]
[ 0.437332] pnp 00:0e: [mem 0x00100000-0x13ffffff]
[ 0.437382] pnp 00:0e: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:09.0 BAR 6 [mem 0x00000000-0x000fffff pref]
[ 0.437400] pnp 00:0e: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:00:09.0 BAR 6 [mem 0x00000000-0x000fffff pref]
[ 0.437798] pnp 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.439097] pnp: PnP ACPI: found 15 devices
[ 0.439107] ACPI: ACPI bus type pnp unregistered
[ 0.439183] system 00:0c: [io 0x04d0-0x04d1] has been reserved
[ 0.439197] system 00:0c: [io 0x0800-0x087f] has been reserved
[ 0.439211] system 00:0c: [io 0x4000-0x400f] has been reserved
[ 0.439224] system 00:0c: [io 0x5000-0x5063] could not be reserved
[ 0.439237] system 00:0c: [io 0x6004-0x6005] has been reserved
[ 0.439250] system 00:0c: [io 0xf000-0xf0cf] has been reserved
[ 0.439278] system 00:0d: [mem 0xfff80000-0xffffffff] has been reserved
[ 0.439303] system 00:0e: [mem 0x00100000-0x13ffffff] could not be reserved
[ 0.491342] pci 0000:00:04.0: BAR 9: assigned [mem 0x14000000-0x17ffffff pref]
[ 0.491363] pci 0000:00:04.0: BAR 10: assigned [mem 0x18000000-0x1bffffff]
[ 0.491380] pci 0000:00:04.1: BAR 9: assigned [mem 0x1c000000-0x1fffffff pref]
[ 0.491397] pci 0000:00:04.1: BAR 10: assigned [mem 0x20000000-0x23ffffff]
[ 0.491414] pci 0000:00:01.0: BAR 9: assigned [mem 0x24000000-0x240fffff pref]
[ 0.491431] pci 0000:00:09.0: BAR 6: assigned [mem 0x24100000-0x241fffff pref]
[ 0.491449] pci 0000:00:04.0: BAR 7: assigned [io 0x1000-0x10ff]
[ 0.491463] pci 0000:00:04.0: BAR 8: assigned [io 0x1400-0x14ff]
[ 0.491476] pci 0000:00:04.1: BAR 7: assigned [io 0x1800-0x18ff]
[ 0.491490] pci 0000:00:04.1: BAR 8: assigned [io 0x1c00-0x1cff]
[ 0.491505] pci 0000:01:00.0: BAR 6: assigned [mem 0x24000000-0x2401ffff pref]
[ 0.491517] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.491530] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.491547] pci 0000:00:01.0: bridge window [mem 0x40000000-0x410fffff]
[ 0.491560] pci 0000:00:01.0: bridge window [mem 0x24000000-0x240fffff pref]
[ 0.491576] pci 0000:00:04.0: CardBus bridge to [bus 02-05]
[ 0.491587] pci 0000:00:04.0: bridge window [io 0x1000-0x10ff]
[ 0.491601] pci 0000:00:04.0: bridge window [io 0x1400-0x14ff]
[ 0.491615] pci 0000:00:04.0: bridge window [mem 0x14000000-0x17ffffff pref]
[ 0.491629] pci 0000:00:04.0: bridge window [mem 0x18000000-0x1bffffff]
[ 0.491643] pci 0000:00:04.1: CardBus bridge to [bus 06-09]
[ 0.491654] pci 0000:00:04.1: bridge window [io 0x1800-0x18ff]
[ 0.491667] pci 0000:00:04.1: bridge window [io 0x1c00-0x1cff]
[ 0.491680] pci 0000:00:04.1: bridge window [mem 0x1c000000-0x1fffffff pref]
[ 0.491695] pci 0000:00:04.1: bridge window [mem 0x20000000-0x23ffffff]
[ 0.492547] ACPI: PCI Interrupt Link [C142] enabled at IRQ 11
[ 0.492559] PCI: setting IRQ 11 as level-triggered
[ 0.492575] pci 0000:00:04.0: PCI INT A -> Link[C142] -> GSI 11 (level, low) -> IRQ 11
[ 0.492604] pci 0000:00:04.1: PCI INT A -> Link[C142] -> GSI 11 (level, low) -> IRQ 11
[ 0.492624] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.492636] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.492648] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.492660] pci_bus 0000:01: resource 1 [mem 0x40000000-0x410fffff]
[ 0.492672] pci_bus 0000:01: resource 2 [mem 0x24000000-0x240fffff pref]
[ 0.492684] pci_bus 0000:02: resource 0 [io 0x1000-0x10ff]
[ 0.492695] pci_bus 0000:02: resource 1 [io 0x1400-0x14ff]
[ 0.492706] pci_bus 0000:02: resource 2 [mem 0x14000000-0x17ffffff pref]
[ 0.492718] pci_bus 0000:02: resource 3 [mem 0x18000000-0x1bffffff]
[ 0.492730] pci_bus 0000:06: resource 0 [io 0x1800-0x18ff]
[ 0.492761] pci_bus 0000:06: resource 1 [io 0x1c00-0x1cff]
[ 0.492774] pci_bus 0000:06: resource 2 [mem 0x1c000000-0x1fffffff pref]
[ 0.492786] pci_bus 0000:06: resource 3 [mem 0x20000000-0x23ffffff]
[ 0.492908] NET: Registered protocol family 2
[ 0.493052] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.493381] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.493825] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.494301] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.494314] TCP reno registered
[ 0.494333] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.494382] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.494861] NET: Registered protocol family 1
[ 0.495268] RPC: Registered udp transport module.
[ 0.495283] RPC: Registered tcp transport module.
[ 0.495291] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.495322] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.495442] pci 0000:00:09.0: Firmware left e100 interrupts enabled; disabling
[ 0.495473] pci 0000:01:00.0: Boot video device
[ 0.495485] PCI: CLS 32 bytes, default 32
[ 0.498399] audit: initializing netlink socket (disabled)
[ 0.498442] type=2000 audit(1380881896.496:1): initialized
[ 0.514467] VFS: Disk quotas dquot_6.5.2
[ 0.514832] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.516200] DLM (built Apr 9 2011 23:32:52) installed
[ 0.521867] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.523025] NTFS driver 2.1.29 [Flags: R/W].
[ 0.523850] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.524854] JFS: nTxBlock = 2403, nTxLock = 19225
[ 0.529560] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[ 0.532279] SGI XFS Quota Management subsystem
[ 0.532315] OCFS2 1.5.0
[ 0.533242] ocfs2: Registered cluster interface o2cb
[ 0.533563] ocfs2: Registered cluster interface user
[ 0.533573] OCFS2 DLMFS 1.5.0
[ 0.534036] OCFS2 User DLM kernel interface loaded
[ 0.534048] OCFS2 Node Manager 1.5.0
[ 0.534634] OCFS2 DLM 1.5.0
[ 0.536390] Btrfs loaded
[ 0.538698] GFS2 (built Apr 9 2011 23:33:12) installed
[ 0.538791] msgmni has been set to 600
[ 0.542616] async_tx: api initialized (async)
[ 0.543100] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.543207] io scheduler noop registered
[ 0.543216] io scheduler deadline registered
[ 0.543355] io scheduler cfq registered (default)
[ 0.544377] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.545415] ERST: Table is not found!
[ 0.545485] isapnp: Scanning for PnP cards...
[ 0.901264] isapnp: No Plug & Play device found
[ 0.917562] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.164425] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.430425] serial8250: ttyS2 at I/O 0x3e8 (irq = 3) is a 16550A
[ 1.452223] 00:01: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.454241] ACPI: PCI Interrupt Link [C149] enabled at IRQ 11
[ 1.454265] serial 0000:00:09.1: PCI INT A -> Link[C149] -> GSI 11 (level, low) -> IRQ 11
[ 1.455997] Floppy drive(s): fd0 is 1.44M
[ 1.469140] FDC 0 is a post-1991 82077
[ 1.480157] brd: module loaded
[ 1.484962] loop: module loaded
[ 1.484975] Compaq SMART2 Driver (v 2.6.0)
[ 1.485326] HP CISS Driver (v 3.6.26)
[ 1.488413] Loading iSCSI transport class v2.0-870.
[ 1.490412] fnic: Cisco FCoE HBA Driver, ver 1.4.0.145
[ 1.497304] Adaptec aacraid driver 1.1-5[26400]-ms
[ 1.497699] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 1.498626] scsi: Detection failed (no card)
[ 1.498649] sym53c416.c: Version 1.0.0-ac
[ 1.498696] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options
[ 1.498996] QLogic Fibre Channel HBA Driver: 8.03.05-k0
[ 1.499515] iscsi: registered transport (qla4xxx)
[ 1.499669] QLogic iSCSI HBA Driver
[ 1.499678] Emulex LightPulse Fibre Channel SCSI driver 8.3.18
[ 1.499686] Copyright(c) 2004-2009 Emulex. All rights reserved.
[ 1.499876] Brocade BFA FC/FCOE SCSI driver - version: 2.3.2.0
[ 1.522059] Failed initialization of WD-7000 SCSI card!
[ 1.554999] DC390: clustering now enabled by default. If you get problems load
[ 1.555037] with "disable_clustering=1" and report to maintainers
[ 1.555369] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 1.555688] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 1.555845] megasas: 00.00.04.31-rc1 Mon. May 3, 11:41:51 PST 2010
[ 1.556074] mpt2sas version 06.100.00.00 loaded
[ 1.556689] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 1.557201] 3ware Storage Controller device driver for Linux v1.26.02.003.
[ 1.557347] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 1.557503] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[ 1.557668] ipr: IBM Power RAID SCSI Device Driver version: 2.5.1 (August 10, 2010)
[ 1.557825] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
[ 1.557976] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
[ 1.558644] st: Version 20100829, fixed bufsize 32768, s/g segs 256
[ 1.560760] ata_piix 0000:00:07.1: version 2.13
[ 1.563546] scsi2 : ata_piix
[ 1.564340] scsi3 : ata_piix
[ 1.565090] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x3420 irq 14
[ 1.565104] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x3428 irq 15
[ 1.565510] ata2: port disabled. ignoring.
[ 1.574840] I2O subsystem v1.325
[ 1.574852] i2o: max drivers = 8
[ 1.575466] I2O Configuration OSM v1.323
[ 1.575585] I2O Bus Adapter OSM v1.317
[ 1.575705] I2O Block Device OSM v1.325
[ 1.576469] I2O SCSI Peripheral OSM v1.316
[ 1.576593] I2O ProcFS OSM v1.316
[ 1.576751] Fusion MPT base driver 3.04.17
[ 1.576760] Copyright (c) 1999-2008 LSI Corporation
[ 1.576783] Fusion MPT SPI Host driver 3.04.17
[ 1.576984] Fusion MPT FC Host driver 3.04.17
[ 1.577271] Fusion MPT SAS Host driver 3.04.17
[ 1.577466] Fusion MPT misc device (ioctl) driver 3.04.17
[ 1.577795] mptctl: Registered with Fusion MPT base driver
[ 1.577808] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 1.577819] Fusion MPT LAN driver 3.04.17
[ 1.578376] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.578715] 116x: driver isp116x-hcd, 03 Nov 2005
[ 1.578841] driver isp1362-hcd, 2005-04-04
[ 1.578967] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.579223] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.580307] ACPI: PCI Interrupt Link [C14A] enabled at IRQ 11
[ 1.580328] uhci_hcd 0000:00:07.2: PCI INT D -> Link[C14A] -> GSI 11 (level, low) -> IRQ 11
[ 1.580357] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 1.580848] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 1.580917] uhci_hcd 0000:00:07.2: irq 11, io base 0x00003400
[ 1.581140] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.581153] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.581165] usb usb1: Product: UHCI Host Controller
[ 1.581174] usb usb1: Manufacturer: Linux 2.6.37.6-smp uhci_hcd
[ 1.581184] usb usb1: SerialNumber: 0000:00:07.2
[ 1.581903] hub 1-0:1.0: USB hub found
[ 1.581928] hub 1-0:1.0: 2 ports detected
[ 1.582829] sl811: driver sl811-hcd, 19 May 2005
[ 1.582966] r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
[ 1.583767] Initializing USB Mass Storage driver...
[ 1.583968] usbcore: registered new interface driver usb-storage
[ 1.583977] USB Mass Storage support registered.
[ 1.584203] usbcore: registered new interface driver ums-alauda
[ 1.584345] usbcore: registered new interface driver ums-cypress
[ 1.584486] usbcore: registered new interface driver ums-datafab
[ 1.584629] usbcore: registered new interface driver ums-freecom
[ 1.584775] usbcore: registered new interface driver ums-isd200
[ 1.584918] usbcore: registered new interface driver ums-jumpshot
[ 1.585129] usbcore: registered new interface driver ums-karma
[ 1.585279] usbcore: registered new interface driver ums-onetouch
[ 1.585426] usbcore: registered new interface driver ums-sddr09
[ 1.585575] usbcore: registered new interface driver ums-sddr55
[ 1.585722] usbcore: registered new interface driver ums-usbat
[ 1.586267] PNP: PS/2 Controller [PNP0303:C0D8,PNP0f0e:C0D9] at 0x60,0x64 irq 1,12
[ 1.588474] i8042.c: Detected active multiplexing controller, rev 1.0.
[ 1.589561] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.589583] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.589766] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.589781] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.589794] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.591183] mice: PS/2 mouse device common for all mice
[ 1.591553] md: linear personality registered for level -1
[ 1.591564] md: raid0 personality registered for level 0
[ 1.591573] md: raid1 personality registered for level 1
[ 1.591582] md: raid10 personality registered for level 10
[ 1.591591] md: raid6 personality registered for level 6
[ 1.591599] md: raid5 personality registered for level 5
[ 1.591607] md: raid4 personality registered for level 4
[ 1.591616] md: multipath personality registered for level -4
[ 1.592500] device-mapper: uevent: version 1.0.3
[ 1.593381] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
[ 1.593814] cpuidle: using governor ladder
[ 1.593824] cpuidle: using governor menu
[ 1.594182] input: Speakup as /devices/virtual/input/input0
[ 1.594338] speakup 3.1.6: initialized
[ 1.594367] synth name on entry is: (null)
[ 1.594663] initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
[ 1.595132] TCP cubic registered
[ 1.595141] Initializing XFRM netlink socket
[ 1.595189] NET: Registered protocol family 17
[ 1.595273] Registering the dns_resolver key type
[ 1.595344] Using IPI No-Shortcut mode
[ 1.619451] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.722579] ata1.00: ATA-6: IC25N030ATMR04-0, MOAOAD4A, max UDMA/100
[ 1.722594] ata1.00: 58605120 sectors, multi 16: LBA
[ 1.722617] ata1.01: ATAPI: Compaq DVD-ROM SD-C2402, 1A05, max MWDMA2
[ 1.728437] ata1.00: configured for UDMA/33
[ 1.734289] ata1.01: configured for MWDMA2
[ 1.735332] scsi 2:0:0:0: Direct-Access ATA IC25N030ATMR04-0 MOAO PQ: 0 ANSI: 5
[ 1.736465] sd 2:0:0:0: [sda] 58605120 512-byte logical blocks: (30.0 GB/27.9 GiB)
[ 1.736705] sd 2:0:0:0: [sda] Write Protect is off
[ 1.736718] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.736819] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.780098] sda: sda1 sda2 sda3
[ 1.780905] scsi 2:0:1:0: CD-ROM Compaq DVD-ROM SD-C2402 1A05 PQ: 0 ANSI: 5
[ 1.789417] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 1.789431] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.789877] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.790474] sr 2:0:1:0: Attached scsi CD-ROM sr0
[ 1.791099] registered taskstats version 1
[ 1.791772] md: Waiting for all devices to be available before autodetect
[ 1.791783] md: If you don't use raid, use raid=noautodetect
[ 1.792701] md: Autodetecting RAID arrays.
[ 1.792712] md: Scanned 0 and added 0 devices.
[ 1.792719] md: autorun ...
[ 1.792725] md: ... autorun DONE.
[ 1.809325] EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
[ 1.809812] EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
[ 1.838007] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.838100] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
[ 1.851006] devtmpfs: mounted
[ 1.851107] Freeing unused kernel memory: 612k freed
[ 1.853965] Write protecting the kernel text: 10108k
[ 1.854239] Write protecting the kernel read-only data: 2540k
[ 1.883099] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 2.066048] usb 1-1: New USB device found, idVendor=0cf3, idProduct=1006
[ 2.066064] usb 1-1: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 2.066076] usb 1-1: Product: USB2.0 WLAN
[ 2.066085] usb 1-1: Manufacturer: ATHEROS
[ 2.066093] usb 1-1: SerialNumber: 12345
[ 4.057849] udev[1159]: starting version 165
[ 5.481764] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.588749] ACPI: AC Adapter [C0F6] (on-line)
[ 5.651776] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 5.652006] ACPI: Sleep Button [C057]
[ 5.671663] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 5.672165] ACPI: Lid Switch [C16B]
[ 5.672375] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.672536] ACPI: Power Button [PWRF]
[ 5.687453] Linux agpgart interface v0.103
[ 5.756647] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 5.756833] sr 2:0:1:0: Attached scsi generic sg1 type 5
[ 5.857177] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 5.857194] e100: Copyright(c) 1999-2006 Intel Corporation
[ 5.857408] e100 0000:00:09.0: PCI INT A -> Link[C149] -> GSI 11 (level, low) -> IRQ 11
[ 6.000536] e100 0000:00:09.0: PME# disabled
[ 6.001109] e100 0000:00:09.0: eth0: addr 0x41280000, irq 11, MAC addr 00:d0:59:9d:a1:6d
[ 6.328653] ACPI: Battery Slot [C0FE] (battery present)
[ 6.328975] ACPI: Battery Slot [C0FF] (battery absent)
[ 6.329225] ACPI: Battery Slot [C100] (battery absent)
[ 6.364530] piix4_smbus 0000:00:07.3: SMBus Host Controller at 0x4000, revision 0
[ 6.549461] yenta_cardbus 0000:00:04.0: CardBus bridge found [0e11:b121]
[ 6.549493] yenta_cardbus 0000:00:04.0: Enabling burst memory read transactions
[ 6.549508] yenta_cardbus 0000:00:04.0: Using CSCINT to route CSC interrupts to PCI
[ 6.549519] yenta_cardbus 0000:00:04.0: Routing CardBus interrupts to PCI
[ 6.549533] yenta_cardbus 0000:00:04.0: TI: mfunc 0x01001c72, devctl 0x64
[ 6.671855] ACPI: Fan [C15D] (off)
[ 6.682522] Linux video capture interface: v2.00
[ 6.689728] ACPI: Fan [C160] (off)
[ 6.706698] ACPI: Fan [C162] (off)
[ 6.777168] yenta_cardbus 0000:00:04.0: ISA IRQ mask 0x04b8, PCI irq 11
[ 6.777185] yenta_cardbus 0000:00:04.0: Socket status: 30000006
[ 6.777533] ACPI: acpi_idle registered with cpuidle
[ 6.777697] Marking TSC unstable due to TSC halts in idle
[ 6.785253] Switching to clocksource acpi_pm
[ 6.788212] yenta_cardbus 0000:00:04.1: CardBus bridge found [0e11:b121]
[ 6.788245] yenta_cardbus 0000:00:04.1: Using CSCINT to route CSC interrupts to PCI
[ 6.788257] yenta_cardbus 0000:00:04.1: Routing CardBus interrupts to PCI
[ 6.788271] yenta_cardbus 0000:00:04.1: TI: mfunc 0x01001c72, devctl 0x64
[ 6.790986] cfg80211: Calling CRDA to update world regulatory domain
[ 6.851610] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 6.961807] NET: Registered protocol family 23
[ 6.963604] rtc_cmos 00:09: RTC can wake from S4
[ 6.966181] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[ 6.966230] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 7.012427] yenta_cardbus 0000:00:04.1: ISA IRQ mask 0x04b8, PCI irq 11
[ 7.012442] yenta_cardbus 0000:00:04.1: Socket status: 30000006
[ 7.063671] maestro_radio 0000:00:08.0: PCI INT A -> Link[C149] -> GSI 11 (level, low) -> IRQ 11
[ 7.190361] maestro_radio: probe of 0000:00:08.0 failed with error -5
[ 7.190645] agpgart-intel 0000:00:00.0: Intel 440BX Chipset
[ 7.199225] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0x50000000
[ 7.484938] thermal LNXTHERM:00: registered as thermal_zone0
[ 7.484954] ACPI: Thermal Zone [C15E] (52 C)
[ 7.663447] found SMC SuperIO Chip (devid=0x0a rev=00 base=0x00e0): FDC37N971
[ 7.663479] smsc_ircc_present: can't get sir_base of 0x3e8
[ 7.741607] Synaptics Touchpad, model: 1, fw: 5.6, id: 0x165eb1, caps: 0x804713/0x0/0x0
[ 7.828569] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[ 8.048843] parport_pc 00:04: reported by Plug and Play ACPI
[ 8.056275] parport_pc 00:04: disabled
[ 8.120001] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
[ 8.120570] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x3e8-0x3ff 0x4d0-0x4d7
[ 8.121556] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
[ 8.122105] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3e8-0x3ff 0x4d0-0x4d7
[ 8.122611] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x100-0x107 0x170-0x177 0x1f0-0x1f7 0x320-0x327 0x350-0x357 0x370-0x377
[ 8.123637] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xf0000-0xfffff
[ 8.123833] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
[ 8.124124] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x100-0x107 0x170-0x177 0x1f0-0x1f7 0x320-0x327 0x350-0x357 0x370-0x377
[ 8.125164] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xf0000-0xfffff
[ 8.125359] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: clean.
[ 8.125553] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 8.125759] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff:
[ 8.126219] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 8.126453] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 8.131545] clean.
[ 8.246196] ppdev: user-space parallel port driver
[ 8.443185] usb 1-1: ath9k_htc: Firmware - ar9271.fw not found
[ 8.443282] ath9k_hif_usb: probe of 1-1:1.0 failed with error -22
[ 8.443352] usbcore: registered new interface driver ath9k_hif_usb
[ 9.499772] input: ES1978 as /devices/pci0000:00/0000:00:08.0/input/input7
[ 9.551087] es1968: clocking to 48000
[ 10.033257] Adding 1028156k swap on /dev/sda2. Priority:-1 extents:1 across:1028156k
[ 10.169891] fuse init (API version 7.15)
[ 10.709749] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 10.799082] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 11.564075] lp: driver loaded but no devices found
[ 11.727698] powernow: This module only works with AMD K7 CPUs
[ 11.869760] cpufreq-nforce2: No nForce2 chipset.
[ 15.352676] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 24.107160] NET: Registered protocol family 10
[ 24.108000] lo: Disabled Privacy Extensions
[ 38.215392] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 59.053575] ata1.00: configured for UDMA/33
[ 59.059396] ata1.01: configured for MWDMA2
[ 59.059418] ata1: EH complete
[ 60.089496] EXT4-fs (sda1): re-mounted. Opts: commit=0
[ 60.530063] EXT4-fs (sda3): re-mounted. Opts: commit=0
root[bartucz]#
A dmesg3 az átlinkelés, illetve az ar9271 bemásolása után:
[ 0.397136] ACPI: bus type pnp registered
[ 0.413936] pnp 00:00: [bus 00-ff]
[ 0.413952] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.413963] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.413975] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.413987] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.413999] pnp 00:00: [mem 0x14000000-0xfff7ffff window]
[ 0.414010] pnp 00:00: [mem 0x000d4000-0x000effff window]
[ 0.414551] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.416820] pnp 00:01: [io 0x03f8-0x03ff]
[ 0.416832] ERROR: Unable to locate IOAPIC for GSI 4
[ 0.416897] pnp 00:01: [irq 4]
[ 0.417362] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[ 0.419944] pnp 00:02: [io 0x03f0-0x03f5]
[ 0.419956] pnp 00:02: [io 0x03f7]
[ 0.419965] ERROR: Unable to locate IOAPIC for GSI 6
[ 0.420023] pnp 00:02: [irq 6]
[ 0.420034] pnp 00:02: [dma 2]
[ 0.420403] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.424400] pnp 00:03: [io 0x03e8-0x03ef]
[ 0.424413] pnp 00:03: [io 0x0100-0x0107]
[ 0.424423] ERROR: Unable to locate IOAPIC for GSI 3
[ 0.424479] pnp 00:03: [irq 3]
[ 0.424490] pnp 00:03: [dma 5]
[ 0.425064] pnp 00:03: Plug and Play ACPI device, IDs SMCf010 PNP0510 (active)
[ 0.427872] pnp 00:04: [io 0x0378-0x037f]
[ 0.427884] pnp 00:04: [io 0x0778-0x077a]
[ 0.427894] ERROR: Unable to locate IOAPIC for GSI 7
[ 0.427949] pnp 00:04: [irq 7]
[ 0.427960] pnp 00:04: [dma 3]
[ 0.428526] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.428667] pnp 00:05: [io 0x0010-0x001f]
[ 0.428679] pnp 00:05: [io 0x0024-0x003d]
[ 0.428689] pnp 00:05: [io 0x0050-0x0053]
[ 0.428699] pnp 00:05: [io 0x0063]
[ 0.428708] pnp 00:05: [io 0x0065]
[ 0.428718] pnp 00:05: [io 0x0067]
[ 0.428727] pnp 00:05: [io 0x0074-0x0077]
[ 0.428737] pnp 00:05: [io 0x0090-0x0091]
[ 0.428746] pnp 00:05: [io 0x0092]
[ 0.428756] pnp 00:05: [io 0x0093-0x009f]
[ 0.428766] pnp 00:05: [io 0x00a4-0x00bd]
[ 0.428775] pnp 00:05: [io 0x00e0-0x00e3]
[ 0.429074] pnp 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.429129] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.429139] ERROR: Unable to locate IOAPIC for GSI 13
[ 0.429198] pnp 00:06: [irq 13]
[ 0.429454] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.429525] pnp 00:07: [io 0x0000-0x000f]
[ 0.429536] pnp 00:07: [io 0x0080-0x008f]
[ 0.429547] pnp 00:07: [io 0x00c0-0x00df]
[ 0.429557] pnp 00:07: [dma 4]
[ 0.429785] pnp 00:07: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.429836] pnp 00:08: [io 0x0061]
[ 0.430051] pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.430103] pnp 00:09: [io 0x0070-0x0071]
[ 0.430114] pnp 00:09: [io 0x0072-0x0073]
[ 0.430123] ERROR: Unable to locate IOAPIC for GSI 8
[ 0.430178] pnp 00:09: [irq 8]
[ 0.430472] pnp 00:09: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.430527] pnp 00:0a: [io 0x0060]
[ 0.430537] pnp 00:0a: [io 0x0064]
[ 0.430545] ERROR: Unable to locate IOAPIC for GSI 1
[ 0.430599] pnp 00:0a: [irq 1]
[ 0.430818] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.430866] ERROR: Unable to locate IOAPIC for GSI 12
[ 0.430921] pnp 00:0b: [irq 12]
[ 0.431160] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
[ 0.431337] pnp 00:0c: [io 0x04d0-0x04d1]
[ 0.431348] pnp 00:0c: [io 0x0800-0x087f]
[ 0.431359] pnp 00:0c: [io 0x4000-0x400f]
[ 0.431369] pnp 00:0c: [io 0x5000-0x5063]
[ 0.431379] pnp 00:0c: [io 0x6004-0x6005]
[ 0.431388] pnp 00:0c: [io 0xf000-0xf0cf]
[ 0.431703] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.434795] pnp 00:0d: [mem 0x000d1800-0x000d3fff]
[ 0.434808] pnp 00:0d: [mem 0xfff80000-0xffffffff]
[ 0.434861] pnp 00:0d: disabling [mem 0x000d1800-0x000d3fff] because it overlaps 0000:00:09.0 BAR 6 [mem 0x00000000-0x000fffff pref]
[ 0.435230] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.436405] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[ 0.436418] pnp 00:0e: [mem 0x000f0000-0x000fffff]
[ 0.436429] pnp 00:0e: [mem 0x00100000-0x13ffffff]
[ 0.436480] pnp 00:0e: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:09.0 BAR 6 [mem 0x00000000-0x000fffff pref]
[ 0.436498] pnp 00:0e: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:00:09.0 BAR 6 [mem 0x00000000-0x000fffff pref]
[ 0.436861] pnp 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.438177] pnp: PnP ACPI: found 15 devices
[ 0.438187] ACPI: ACPI bus type pnp unregistered
[ 0.438282] system 00:0c: [io 0x04d0-0x04d1] has been reserved
[ 0.438296] system 00:0c: [io 0x0800-0x087f] has been reserved
[ 0.438309] system 00:0c: [io 0x4000-0x400f] has been reserved
[ 0.438323] system 00:0c: [io 0x5000-0x5063] could not be reserved
[ 0.438336] system 00:0c: [io 0x6004-0x6005] has been reserved
[ 0.438349] system 00:0c: [io 0xf000-0xf0cf] has been reserved
[ 0.438378] system 00:0d: [mem 0xfff80000-0xffffffff] has been reserved
[ 0.438404] system 00:0e: [mem 0x00100000-0x13ffffff] could not be reserved
[ 0.490428] pci 0000:00:04.0: BAR 9: assigned [mem 0x14000000-0x17ffffff pref]
[ 0.490450] pci 0000:00:04.0: BAR 10: assigned [mem 0x18000000-0x1bffffff]
[ 0.490467] pci 0000:00:04.1: BAR 9: assigned [mem 0x1c000000-0x1fffffff pref]
[ 0.490483] pci 0000:00:04.1: BAR 10: assigned [mem 0x20000000-0x23ffffff]
[ 0.490500] pci 0000:00:01.0: BAR 9: assigned [mem 0x24000000-0x240fffff pref]
[ 0.490517] pci 0000:00:09.0: BAR 6: assigned [mem 0x24100000-0x241fffff pref]
[ 0.490535] pci 0000:00:04.0: BAR 7: assigned [io 0x1000-0x10ff]
[ 0.490549] pci 0000:00:04.0: BAR 8: assigned [io 0x1400-0x14ff]
[ 0.490563] pci 0000:00:04.1: BAR 7: assigned [io 0x1800-0x18ff]
[ 0.490577] pci 0000:00:04.1: BAR 8: assigned [io 0x1c00-0x1cff]
[ 0.490591] pci 0000:01:00.0: BAR 6: assigned [mem 0x24000000-0x2401ffff pref]
[ 0.490604] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.490617] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.490633] pci 0000:00:01.0: bridge window [mem 0x40000000-0x410fffff]
[ 0.490647] pci 0000:00:01.0: bridge window [mem 0x24000000-0x240fffff pref]
[ 0.490663] pci 0000:00:04.0: CardBus bridge to [bus 02-05]
[ 0.490674] pci 0000:00:04.0: bridge window [io 0x1000-0x10ff]
[ 0.490687] pci 0000:00:04.0: bridge window [io 0x1400-0x14ff]
[ 0.490701] pci 0000:00:04.0: bridge window [mem 0x14000000-0x17ffffff pref]
[ 0.490715] pci 0000:00:04.0: bridge window [mem 0x18000000-0x1bffffff]
[ 0.490729] pci 0000:00:04.1: CardBus bridge to [bus 06-09]
[ 0.490740] pci 0000:00:04.1: bridge window [io 0x1800-0x18ff]
[ 0.490753] pci 0000:00:04.1: bridge window [io 0x1c00-0x1cff]
[ 0.490767] pci 0000:00:04.1: bridge window [mem 0x1c000000-0x1fffffff pref]
[ 0.490781] pci 0000:00:04.1: bridge window [mem 0x20000000-0x23ffffff]
[ 0.491646] ACPI: PCI Interrupt Link [C142] enabled at IRQ 11
[ 0.491658] PCI: setting IRQ 11 as level-triggered
[ 0.491674] pci 0000:00:04.0: PCI INT A -> Link[C142] -> GSI 11 (level, low) -> IRQ 11
[ 0.491703] pci 0000:00:04.1: PCI INT A -> Link[C142] -> GSI 11 (level, low) -> IRQ 11
[ 0.491723] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.491735] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.491748] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.491759] pci_bus 0000:01: resource 1 [mem 0x40000000-0x410fffff]
[ 0.491771] pci_bus 0000:01: resource 2 [mem 0x24000000-0x240fffff pref]
[ 0.491783] pci_bus 0000:02: resource 0 [io 0x1000-0x10ff]
[ 0.491794] pci_bus 0000:02: resource 1 [io 0x1400-0x14ff]
[ 0.491806] pci_bus 0000:02: resource 2 [mem 0x14000000-0x17ffffff pref]
[ 0.491818] pci_bus 0000:02: resource 3 [mem 0x18000000-0x1bffffff]
[ 0.491830] pci_bus 0000:06: resource 0 [io 0x1800-0x18ff]
[ 0.491841] pci_bus 0000:06: resource 1 [io 0x1c00-0x1cff]
[ 0.491852] pci_bus 0000:06: resource 2 [mem 0x1c000000-0x1fffffff pref]
[ 0.491864] pci_bus 0000:06: resource 3 [mem 0x20000000-0x23ffffff]
[ 0.491984] NET: Registered protocol family 2
[ 0.492123] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.492488] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.492885] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.493423] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.493438] TCP reno registered
[ 0.493465] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.493514] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.493914] NET: Registered protocol family 1
[ 0.494412] RPC: Registered udp transport module.
[ 0.494426] RPC: Registered tcp transport module.
[ 0.494435] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.494466] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.494600] pci 0000:00:09.0: Firmware left e100 interrupts enabled; disabling
[ 0.494632] pci 0000:01:00.0: Boot video device
[ 0.494644] PCI: CLS 32 bytes, default 32
[ 0.497509] audit: initializing netlink socket (disabled)
[ 0.497553] type=2000 audit(1380895287.496:1): initialized
[ 0.513401] VFS: Disk quotas dquot_6.5.2
[ 0.513721] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.515062] DLM (built Apr 9 2011 23:32:52) installed
[ 0.520701] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.521847] NTFS driver 2.1.29 [Flags: R/W].
[ 0.522665] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.523677] JFS: nTxBlock = 2403, nTxLock = 19225
[ 0.528473] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[ 0.531071] SGI XFS Quota Management subsystem
[ 0.531107] OCFS2 1.5.0
[ 0.532033] ocfs2: Registered cluster interface o2cb
[ 0.532398] ocfs2: Registered cluster interface user
[ 0.532409] OCFS2 DLMFS 1.5.0
[ 0.532822] OCFS2 User DLM kernel interface loaded
[ 0.532832] OCFS2 Node Manager 1.5.0
[ 0.533502] OCFS2 DLM 1.5.0
[ 0.535153] Btrfs loaded
[ 0.537500] GFS2 (built Apr 9 2011 23:33:12) installed
[ 0.537543] msgmni has been set to 600
[ 0.541413] async_tx: api initialized (async)
[ 0.541791] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.541893] io scheduler noop registered
[ 0.541902] io scheduler deadline registered
[ 0.542043] io scheduler cfq registered (default)
[ 0.543094] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.544154] ERST: Table is not found!
[ 0.544296] isapnp: Scanning for PnP cards...
[ 0.900113] isapnp: No Plug & Play device found
[ 0.916759] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.163424] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.429422] serial8250: ttyS2 at I/O 0x3e8 (irq = 3) is a 16550A
[ 1.451221] 00:01: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.453229] ACPI: PCI Interrupt Link [C149] enabled at IRQ 11
[ 1.453252] serial 0000:00:09.1: PCI INT A -> Link[C149] -> GSI 11 (level, low) -> IRQ 11
[ 1.455074] Floppy drive(s): fd0 is 1.44M
[ 1.468133] FDC 0 is a post-1991 82077
[ 1.479186] brd: module loaded
[ 1.484004] loop: module loaded
[ 1.484087] Compaq SMART2 Driver (v 2.6.0)
[ 1.484394] HP CISS Driver (v 3.6.26)
[ 1.487459] Loading iSCSI transport class v2.0-870.
[ 1.489463] fnic: Cisco FCoE HBA Driver, ver 1.4.0.145
[ 1.496332] Adaptec aacraid driver 1.1-5[26400]-ms
[ 1.496740] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 1.497678] scsi: Detection failed (no card)
[ 1.497702] sym53c416.c: Version 1.0.0-ac
[ 1.497748] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options
[ 1.498098] QLogic Fibre Channel HBA Driver: 8.03.05-k0
[ 1.498577] iscsi: registered transport (qla4xxx)
[ 1.498730] QLogic iSCSI HBA Driver
[ 1.498740] Emulex LightPulse Fibre Channel SCSI driver 8.3.18
[ 1.498748] Copyright(c) 2004-2009 Emulex. All rights reserved.
[ 1.498928] Brocade BFA FC/FCOE SCSI driver - version: 2.3.2.0
[ 1.521058] Failed initialization of WD-7000 SCSI card!
[ 1.553990] DC390: clustering now enabled by default. If you get problems load
[ 1.554002] with "disable_clustering=1" and report to maintainers
[ 1.554366] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 1.554687] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 1.554839] megasas: 00.00.04.31-rc1 Mon. May 3, 11:41:51 PST 2010
[ 1.555055] mpt2sas version 06.100.00.00 loaded
[ 1.555668] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 1.556179] 3ware Storage Controller device driver for Linux v1.26.02.003.
[ 1.556327] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 1.556481] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[ 1.556636] ipr: IBM Power RAID SCSI Device Driver version: 2.5.1 (August 10, 2010)
[ 1.556798] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
[ 1.556960] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
[ 1.557633] st: Version 20100829, fixed bufsize 32768, s/g segs 256
[ 1.559736] ata_piix 0000:00:07.1: version 2.13
[ 1.562518] scsi2 : ata_piix
[ 1.563318] scsi3 : ata_piix
[ 1.564081] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x3420 irq 14
[ 1.564096] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x3428 irq 15
[ 1.564503] ata2: port disabled. ignoring.
[ 1.573699] I2O subsystem v1.325
[ 1.573712] i2o: max drivers = 8
[ 1.574319] I2O Configuration OSM v1.323
[ 1.574441] I2O Bus Adapter OSM v1.317
[ 1.574558] I2O Block Device OSM v1.325
[ 1.575294] I2O SCSI Peripheral OSM v1.316
[ 1.575419] I2O ProcFS OSM v1.316
[ 1.575585] Fusion MPT base driver 3.04.17
[ 1.575593] Copyright (c) 1999-2008 LSI Corporation
[ 1.575617] Fusion MPT SPI Host driver 3.04.17
[ 1.575816] Fusion MPT FC Host driver 3.04.17
[ 1.576002] Fusion MPT SAS Host driver 3.04.17
[ 1.576287] Fusion MPT misc device (ioctl) driver 3.04.17
[ 1.576616] mptctl: Registered with Fusion MPT base driver
[ 1.576628] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 1.576639] Fusion MPT LAN driver 3.04.17
[ 1.577174] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.577493] 116x: driver isp116x-hcd, 03 Nov 2005
[ 1.577617] driver isp1362-hcd, 2005-04-04
[ 1.577739] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.577920] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.578986] ACPI: PCI Interrupt Link [C14A] enabled at IRQ 11
[ 1.579007] uhci_hcd 0000:00:07.2: PCI INT D -> Link[C14A] -> GSI 11 (level, low) -> IRQ 11
[ 1.579066] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 1.579570] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 1.579638] uhci_hcd 0000:00:07.2: irq 11, io base 0x00003400
[ 1.579796] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.579809] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.579821] usb usb1: Product: UHCI Host Controller
[ 1.579831] usb usb1: Manufacturer: Linux 2.6.37.6-smp uhci_hcd
[ 1.579840] usb usb1: SerialNumber: 0000:00:07.2
[ 1.580651] hub 1-0:1.0: USB hub found
[ 1.580676] hub 1-0:1.0: 2 ports detected
[ 1.581570] sl811: driver sl811-hcd, 19 May 2005
[ 1.581708] r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
[ 1.582509] Initializing USB Mass Storage driver...
[ 1.582729] usbcore: registered new interface driver usb-storage
[ 1.582738] USB Mass Storage support registered.
[ 1.582878] usbcore: registered new interface driver ums-alauda
[ 1.583086] usbcore: registered new interface driver ums-cypress
[ 1.583232] usbcore: registered new interface driver ums-datafab
[ 1.583383] usbcore: registered new interface driver ums-freecom
[ 1.583526] usbcore: registered new interface driver ums-isd200
[ 1.583670] usbcore: registered new interface driver ums-jumpshot
[ 1.583814] usbcore: registered new interface driver ums-karma
[ 1.583960] usbcore: registered new interface driver ums-onetouch
[ 1.584182] usbcore: registered new interface driver ums-sddr09
[ 1.584332] usbcore: registered new interface driver ums-sddr55
[ 1.584477] usbcore: registered new interface driver ums-usbat
[ 1.584925] PNP: PS/2 Controller [PNP0303:C0D8,PNP0f0e:C0D9] at 0x60,0x64 irq 1,12
[ 1.587191] i8042.c: Detected active multiplexing controller, rev 1.0.
[ 1.588171] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.588193] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.588373] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.588387] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.588401] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.589750] mice: PS/2 mouse device common for all mice
[ 1.590198] md: linear personality registered for level -1
[ 1.590209] md: raid0 personality registered for level 0
[ 1.590218] md: raid1 personality registered for level 1
[ 1.590227] md: raid10 personality registered for level 10
[ 1.590236] md: raid6 personality registered for level 6
[ 1.590244] md: raid5 personality registered for level 5
[ 1.590253] md: raid4 personality registered for level 4
[ 1.590262] md: multipath personality registered for level -4
[ 1.591128] device-mapper: uevent: version 1.0.3
[ 1.591946] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
[ 1.592444] cpuidle: using governor ladder
[ 1.592454] cpuidle: using governor menu
[ 1.592741] input: Speakup as /devices/virtual/input/input0
[ 1.592885] speakup 3.1.6: initialized
[ 1.592914] synth name on entry is: (null)
[ 1.593303] initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
[ 1.593705] TCP cubic registered
[ 1.593714] Initializing XFRM netlink socket
[ 1.593765] NET: Registered protocol family 17
[ 1.593849] Registering the dns_resolver key type
[ 1.593920] Using IPI No-Shortcut mode
[ 1.618159] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.721577] ata1.00: ATA-6: IC25N030ATMR04-0, MOAOAD4A, max UDMA/100
[ 1.721591] ata1.00: 58605120 sectors, multi 16: LBA
[ 1.721614] ata1.01: ATAPI: Compaq DVD-ROM SD-C2402, 1A05, max MWDMA2
[ 1.727437] ata1.00: configured for UDMA/33
[ 1.733288] ata1.01: configured for MWDMA2
[ 1.734336] scsi 2:0:0:0: Direct-Access ATA IC25N030ATMR04-0 MOAO PQ: 0 ANSI: 5
[ 1.735468] sd 2:0:0:0: [sda] 58605120 512-byte logical blocks: (30.0 GB/27.9 GiB)
[ 1.735700] sd 2:0:0:0: [sda] Write Protect is off
[ 1.735714] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.735814] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.787396] sda: sda1 sda2 sda3
[ 1.788891] scsi 2:0:1:0: CD-ROM Compaq DVD-ROM SD-C2402 1A05 PQ: 0 ANSI: 5
[ 1.789517] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.797136] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 1.797150] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.797845] sr 2:0:1:0: Attached scsi CD-ROM sr0
[ 1.798472] registered taskstats version 1
[ 1.799204] md: Waiting for all devices to be available before autodetect
[ 1.799216] md: If you don't use raid, use raid=noautodetect
[ 1.800130] md: Autodetecting RAID arrays.
[ 1.800142] md: Scanned 0 and added 0 devices.
[ 1.800149] md: autorun ...
[ 1.800155] md: ... autorun DONE.
[ 1.816600] EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
[ 1.817092] EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
[ 1.845342] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.845392] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
[ 1.858306] devtmpfs: mounted
[ 1.858376] Freeing unused kernel memory: 612k freed
[ 1.861311] Write protecting the kernel text: 10108k
[ 1.861482] Write protecting the kernel read-only data: 2540k
[ 1.882099] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 2.062640] usb 1-1: New USB device found, idVendor=0cf3, idProduct=1006
[ 2.062655] usb 1-1: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 2.062667] usb 1-1: Product: USB2.0 WLAN
[ 2.062676] usb 1-1: Manufacturer: ATHEROS
[ 2.062684] usb 1-1: SerialNumber: 12345
[ 4.080710] udev[1159]: starting version 165
[ 5.362390] ACPI: AC Adapter [C0F6] (on-line)
[ 5.487803] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 5.532139] ACPI: Sleep Button [C057]
[ 5.532426] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 5.532867] ACPI: Lid Switch [C16B]
[ 5.578191] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.578449] ACPI: Power Button [PWRF]
[ 5.646805] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.705784] Linux agpgart interface v0.103
[ 5.736895] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 5.750187] sr 2:0:1:0: Attached scsi generic sg1 type 5
[ 5.976634] ACPI: Battery Slot [C0FE] (battery present)
[ 5.999614] ACPI: Battery Slot [C0FF] (battery absent)
[ 5.999949] ACPI: Battery Slot [C100] (battery absent)
[ 6.019425] ACPI: Fan [C15D] (off)
[ 6.098483] ACPI: Fan [C160] (off)
[ 6.149710] piix4_smbus 0000:00:07.3: SMBus Host Controller at 0x4000, revision 0
[ 6.303241] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 6.303254] e100: Copyright(c) 1999-2006 Intel Corporation
[ 6.303581] e100 0000:00:09.0: PCI INT A -> Link[C149] -> GSI 11 (level, low) -> IRQ 11
[ 6.575560] thermal LNXTHERM:00: registered as thermal_zone0
[ 6.575575] ACPI: Thermal Zone [C15E] (46 C)
[ 6.603424] ACPI: Fan [C162] (off)
[ 6.670166] e100 0000:00:09.0: PME# disabled
[ 6.670942] e100 0000:00:09.0: eth0: addr 0x41280000, irq 11, MAC addr 00:d0:59:9d:a1:6d
[ 6.671128] yenta_cardbus 0000:00:04.0: CardBus bridge found [0e11:b121]
[ 6.671158] yenta_cardbus 0000:00:04.0: Using CSCINT to route CSC interrupts to PCI
[ 6.671170] yenta_cardbus 0000:00:04.0: Routing CardBus interrupts to PCI
[ 6.671185] yenta_cardbus 0000:00:04.0: TI: mfunc 0x01001c72, devctl 0x64
[ 6.693337] Linux video capture interface: v2.00
[ 6.704138] ACPI: acpi_idle registered with cpuidle
[ 6.704300] Marking TSC unstable due to TSC halts in idle
[ 6.728414] Switching to clocksource acpi_pm
[ 6.884610] rtc_cmos 00:09: RTC can wake from S4
[ 6.887291] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[ 6.887342] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 6.895407] yenta_cardbus 0000:00:04.0: ISA IRQ mask 0x04b8, PCI irq 11
[ 6.895424] yenta_cardbus 0000:00:04.0: Socket status: 30000006
[ 6.897327] yenta_cardbus 0000:00:04.1: CardBus bridge found [0e11:b121]
[ 6.897359] yenta_cardbus 0000:00:04.1: Using CSCINT to route CSC interrupts to PCI
[ 6.897371] yenta_cardbus 0000:00:04.1: Routing CardBus interrupts to PCI
[ 6.897385] yenta_cardbus 0000:00:04.1: TI: mfunc 0x01001c72, devctl 0x64
[ 6.946187] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 7.022342] parport_pc 00:04: reported by Plug and Play ACPI
[ 7.028949] parport_pc 00:04: disabled
[ 7.122419] yenta_cardbus 0000:00:04.1: ISA IRQ mask 0x04b8, PCI irq 11
[ 7.122435] yenta_cardbus 0000:00:04.1: Socket status: 30000006
[ 7.126856] agpgart-intel 0000:00:00.0: Intel 440BX Chipset
[ 7.146077] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0x50000000
[ 7.255702] ppdev: user-space parallel port driver
[ 7.468674] maestro_radio 0000:00:08.0: PCI INT A -> Link[C149] -> GSI 11 (level, low) -> IRQ 11
[ 7.620895] maestro_radio: probe of 0000:00:08.0 failed with error -5
[ 7.627671] cfg80211: Calling CRDA to update world regulatory domain
[ 7.670726] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
[ 7.671290] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x3e8-0x3ff 0x4d0-0x4d7
[ 7.671796] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x100-0x107 0x170-0x177 0x1f0-0x1f7
[ 7.673132] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
[ 7.673633] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3e8-0x3ff 0x4d0-0x4d7
[ 7.674175] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x100-0x107 0x170-0x177 0x1f0-0x1f7 0x320-0x327 0x350-0x357 0x370-0x377
[ 7.676391] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xf0000-0xfffff
[ 7.676590] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
[ 7.676788] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 7.676997] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: 0x320-0x327 0x350-0x357 0x370-0x377
[ 7.677550] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xf0000-0xfffff
[ 7.677748] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: clean.
[ 7.677944] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 7.678194] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[ 7.679684] clean.
[ 7.750906] NET: Registered protocol family 23
[ 7.848702] Synaptics Touchpad, model: 1, fw: 5.6, id: 0x165eb1, caps: 0x804713/0x0/0x0
[ 7.901387] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[ 8.551198] found SMC SuperIO Chip (devid=0x0a rev=00 base=0x00e0): FDC37N971
[ 8.551230] smsc_ircc_present: can't get sir_base of 0x3e8
[ 9.670435] usb 1-1: ath9k_htc: Transferred FW: ar9271.fw, size: 51272
[ 9.914318] usb 1-1: ath9k_htc: HTC initialized with 33 credits
[ 10.018911] input: ES1978 as /devices/pci0000:00/0000:00:08.0/input/input7
[ 10.070090] es1968: clocking to 48000
[ 20.029360] Failed to initialize the device
[ 20.038631] ath9k_hif_usb: probe of 1-1:1.0 failed with error -22
[ 20.040182] usbcore: registered new interface driver ath9k_hif_usb
[ 20.179805] Adding 1028156k swap on /dev/sda2. Priority:-1 extents:1 across:1028156k
[ 20.316507] fuse init (API version 7.15)
[ 20.870729] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 20.975153] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 21.811135] lp: driver loaded but no devices found
[ 21.973839] powernow: This module only works with AMD K7 CPUs
[ 22.115764] cpufreq-nforce2: No nForce2 chipset.
[ 25.585179] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 34.406228] NET: Registered protocol family 10
[ 34.407561] lo: Disabled Privacy Extensions
[ 48.249346] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 68.625585] ata1.00: configured for UDMA/33
[ 68.647370] ata1.01: configured for MWDMA2
[ 68.647393] ata1: EH complete
[ 69.659651] EXT4-fs (sda1): re-mounted. Opts: commit=0
[ 70.261194] EXT4-fs (sda3): re-mounted. Opts: commit=0
root[bartucz]#
Mivel enm vagyok linuxguru, nem tudom hol a hiba, és mit kéne még megpróbálnom, hogy menjen a net.
Köszönök minden segítséget. Sok kaptam már eddig is, nélkülük nem jutottam volna idáig, de elkéne még a további segítség. Hátha valaki, aki salixot (vagy slackwaret) használ,és ismeri ezt az usb-s modemet, tud segíteni, vagy rájön a hiba okára.