Sziasztok, egy olyan gondom lenne hogy az alábbi rendszer 10-15 naponta nyom egy kernel panicot (Fatal trap 12: page fault while in kernel mode fault) sajnos egészen pontosan nem látom mert szerverterembe van.
a kernel konfig itt található: www.kiuka.hu/kernel
ha valakinek van valami ötlete szívesen várom mit tudnék tenni, memtest nem irt hibát és panic után sem volt semmi a logban
eddig csak simán ujraindult most meg is fagyott és nem indult ujra magától ekkor látszott hogy kernel panicrol van szó
uname:
FreeBSD www.xy.hu 6.2-RELEASE-p8 FreeBSD 6.2-RELEASE-p8 #4: Sun Oct 14 14:10:55 CEST 2007 root@www.xy.hu:/usr/obj/usr/src/sys/KERNEL amd64
dmesg:
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p8 #4: Sun Oct 14 14:10:55 CEST 2007
root@www.xy.hu:/usr/obj/usr/src/sys/KERNEL
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz (3000.12-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff
Features2=0x4e3bd,CX16,,,>
AMD Features=0x20000800
AMD Features2=0x1
Cores per package: 2
real memory = 7516192768 (7168 MB)
avail memory = 6202847232 (5915 MB)
ACPI APIC Table:
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
ioapic0 irqs 0-23 on motherboard
ioapic1 irqs 24-47 on motherboard
kbd1 at kbdmux0
acpi0: on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: on acpi0
acpi_throttle0: on cpu0
cpu1: on acpi0
acpi_throttle1: on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
cpu2: on acpi0
acpi_throttle2: on cpu2
acpi_throttle2: failed to attach P_CNT
device_attach: acpi_throttle2 attach returned 6
cpu3: on acpi0
acpi_throttle3: on cpu3
acpi_throttle3: failed to attach P_CNT
device_attach: acpi_throttle3 attach returned 6
pcib0: port 0xcf8-0xcff on acpi0
pci0: on pcib0
pcib1: at device 2.0 on pci0
pci1: on pcib1
pcib2: irq 16 at device 0.0 on pci1
pci2: on pcib2
pcib3: irq 16 at device 0.0 on pci2
pci3: on pcib3
pcib4: irq 18 at device 2.0 on pci2
pci4: on pcib4
em0: port 0x2000-0x201f mem 0xc8200000-0xc821ffff irq 18 at device 0.0 on pci4
em0: Ethernet address: 00:30:48:31:3c:8a
em1: port 0x2020-0x203f mem 0xc8220000-0xc823ffff irq 19 at device 0.1 on pci4
em1: Ethernet address: 00:30:48:31:3c:8b
pcib5: at device 0.3 on pci1
pci5: on pcib5
pcib6: at device 4.0 on pci0
pci6: on pcib6
pcib7: at device 0.0 on pci6
pci7: on pcib7
mfi0: mem 0xc8700000-0xc870ffff,0xc8300000-0xc831ffff irq 18 at device 14.0 on pci7
mfi0: 19127 (246909296s/0x0020/0) - Shutdown command received from host
mfi0: 19128 (4278190080s/0x0020/0) - PCI 0x041000 0x04411 0x048086 0x041001: Firmware initialization started (PCI ID 0411/1000/1001/8086)
mfi0: 19129 (4278190080s/0x0020/0) - Type 18: Firmware version 1.02.00-0105
mfi0: 19130 (4278190148s/0x0002/0) - PD 32(e0/s32) event: Inserted: PD 20(e0/s32)
mfi0: 19131 (4278190148s/0x0002/0) - Type 29: Inserted: PD 20(e0/s32) Info: enclPd=ffff, scsiType=0, portMap=02, sasAddr=50010b900016be06,0000000000000000
mfi0: 19132 (4278190148s/0x0002/0) - PD 33(e0/s33) event: Inserted: PD 21(e0/s33)
mfi0: 19133 (4278190148s/0x0002/0) - Type 29: Inserted: PD 21(e0/s33) Info: enclPd=ffff, scsiType=0, portMap=01, sasAddr=50010b900019c88a,0000000000000000
mfi0: 19134 (4278190148s/0x0002/0) - PD 35(e0/s35) event: Inserted: PD 23(e0/s35)
mfi0: 19135 (4278190148s/0x0002/0) - Type 29: Inserted: PD 23(e0/s35) Info: enclPd=ffff, scsiType=0, portMap=08, sasAddr=50010b90001aef3e,0000000000000000
mfi0: 19136 (4278190148s/0x0002/0) - PD 37(e0/s37) event: Inserted: PD 25(e0/s37)
mfi0: 19137 (4278190148s/0x0002/0) - Type 29: Inserted: PD 25(e0/s37) Info: enclPd=ffff, scsiType=0, portMap=04, sasAddr=5000c50003c5ba69,0000000000000000
mfi0: 19138 (246906851s/0x0020/0) - Adapter ticks 246906851 elapsed 69s: Time established as 10/28/07 17:14:11; (69 seconds since power on)
pcib8: at device 0.2 on pci6
pci8: on pcib8
pcib9: at device 6.0 on pci0
pci9: on pcib9
pci0: at device 8.0 (no driver attached)
pcib10: irq 17 at device 28.0 on pci0
pci10: on pcib10
pcib11: at device 0.0 on pci10
pci11: on pcib11
uhci0: port 0x1800-0x181f irq 17 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: port 0x1820-0x183f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: port 0x1840-0x185f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: port 0x1860-0x187f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: mem 0xc8000000-0xc80003ff irq 17 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib12: at device 30.0 on pci0
pci12: on pcib12
pci12: at device 1.0 (no driver attached)
isab0: at device 31.0 on pci0
isa0: on isab0
atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1880-0x188f at device 31.1 on pci0
ata0: on atapci0
ata1: on atapci0
pci0: at device 31.3 (no driver attached)
acpi_button0: on acpi0
atkbdc0: port 0x60,0x64 irq 1 on acpi0
atkbd0: irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
orm0: at iomem 0xc0000-0xcafff on isa0
sc0: at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to accept, logging limited to 5 packets/entry by default
acd0: DMA limited to UDMA33, controller found non-ATA66 cable
acd0: DVDROM at ata0-slave UDMA33
mfid0: on mfi0
mfid0: 68664MB (140623872 sectors) RAID volume '' is optimal
mfid1: on mfi0
mfid1: 570296MB (1167966208 sectors) RAID volume '' is optimal
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Trying to mount root from ufs:/dev/mfid0s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
/var: mount pending error: blocks 16 files 2
WARNING: R/W mount of /mnt denied. Filesystem is not clean - run fsck
- 1042 megtekintés