Bttv - Hiába töltöm be a drivert, semmi.

Hello

Mi lehet szerintetek?

Adatok:

Debian Etch
2.6.18-5-686
xawtv-3.95.dfsg.1

Kártya:

05:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
Subsystem: Pinnacle Systems Inc. PCTV pro (TV + FM stereo receiver)
Flags: bus master, medium devsel, latency 66, IRQ 217
Memory at f8400000 (32-bit, prefetchable) [=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2

05:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
Subsystem: Pinnacle Systems Inc. PCTV pro (TV + FM stereo receiver, audio section)
Flags: medium devsel, IRQ 217
Memory at f8401000 (32-bit, prefetchable) [disabled] [=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2

Az történik, hogy hiába töltöm be a TV kártya driverjét a scantv mégis azt mondja minden esetben, minden csatornára. : “no station”

Ez van:

# modprobe bttv card=39 tuner=33

Ekkor:

Sep 1 01:34:58 tiger kernel: bttv: driver version 0.9.16 loaded
Sep 1 01:34:58 tiger kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture
Sep 1 01:34:58 tiger kernel: bttv: Bt8xx card found (0).
Sep 1 01:34:58 tiger kernel: bttv0: Bt878 (rev 17) at 0000:05:0a.0, irq: 217, latency: 66, mmio: 0xf8400000
Sep 1 01:34:58 tiger kernel: bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
Sep 1 01:34:58 tiger kernel: bttv0: using: Pinnacle PCTV Studio/Rave [card=39,insmod option]
Sep 1 01:34:58 tiger kernel: bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
Sep 1 01:34:58 tiger kernel: bttv0: i2c: checking for MSP34xx @ 0x80... not found
Sep 1 01:34:58 tiger kernel: bttv0: pinnacle/mt: id=1 info="PAL / mono" radio=no
Sep 1 01:34:58 tiger kernel: bttv0: using tuner=33
Sep 1 01:34:58 tiger kernel: bttv0: i2c: checking for MSP34xx @ 0x80... not found
Sep 1 01:34:58 tiger kernel: bttv0: i2c: checking for TDA9875 @ 0xb0... not found
Sep 1 01:34:58 tiger kernel: bttv0: i2c: checking for TDA7432 @ 0x8a... not found
Sep 1 01:34:58 tiger kernel: tuner 0-0043: chip found @ 0x86 (bt878 #0 [sw])
Sep 1 01:34:58 tiger kernel: tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner)
Sep 1 01:34:58 tiger kernel: tuner 0-0060: Chip ID is not zero. It is not a TEA5767
Sep 1 01:34:58 tiger kernel: tuner 0-0060: chip found @ 0xc0 (bt878 #0 [sw])
Sep 1 01:34:58 tiger kernel: tuner 0-0060: microtune: companycode=8e3c part=42 rev=a9
Sep 1 01:34:58 tiger kernel: tuner 0-0060: microtune MT2050 found, OK
Sep 1 01:34:58 tiger kernel: bttv0: registered device video0
Sep 1 01:34:58 tiger kernel: bttv0: registered device vbi0
Sep 1 01:34:58 tiger kernel: bttv0: PLL: 28636363 => 35468950 . ok

Enek ellenére:

S01 ( 69.25 MHz):
tiger:~# scantv -C /dev/vbi0 -c /dev/video0

please select your TV norm
0: PAL
1: NTSC
2: SECAM
3: PAL-Nc
4: PAL-M
5: PAL-N
6: NTSC-JP
7: PAL-60
nr ? 0

please select a frequency table
0: us-bcast
1: us-cable
2: us-cable-hrc
3: japan-bcast
4: japan-cable
5: europe-west
6: europe-east
7: italy
8: newzealand
9: australia
10: ireland
11: france
12: china-bcast
13: southafrica
14: argentina
15: australia-optus
16: russia
nr ? 5
[global]
freqtab = europe-west

[defaults]
input = Television
norm = PAL

scanning channel list europe-west...
E2 ( 48.25 MHz): no station
E3 ( 55.25 MHz): no station
E4 ( 62.25 MHz): no station
S01 ( 69.25 MHz): no station
S02 ( 76.25 MHz): no station
S03 ( 83.25 MHz): no station
E5 (175.25 MHz): no station
E6 (182.25 MHz): no station
E7 (189.25 MHz): no station
E8 (196.25 MHz): no station
E9 (203.25 MHz): no station
E10 (210.25 MHz): no station
E11 (217.25 MHz): no station
E12 (224.25 MHz): no station

stb stb .. :(

Megnéztem, a kábelben "van TV", windows alatt megy a kártya. :(

Van valakinek valami ötlete?

Köszönöm