Alpha DS20-as eladó

Bakker srácok, tegnap írtuk alá az adásvételit :(
Eddig senki hozzá sem szólt, most meg felkapott lett. Pedig a cég akivel viszavetettem ennyiért igencsak húzta a száját.

[quote:87008a4165="RoLi"]Meg lehetne esetleg tudni a ceg nevet?

PUment
szerk: vagy fog menni, csak megtaláljam a címet :D

Na akkor eljött a kiselejtezés ideje egyik gépemre:
DS20-as Compaq/Digital/HP Alpha
Dual 667, EV6-os busz.
9GB SCA HDD
1 GB RAM
12/24 DDS3-as SCSI tape.
Van hozzá egy FC kis külső RAID, benne 4db 9GB-s SCA HDD
Hot plug HDD, power meg minden :) Jó kis gép, semmi baja, csak a mostani oracle adatmennyiségünkhöz már lassú.
Az árban biztos megegyezünk. ;)
meg itt a dmesg:
[code:1:1de4783020]
Linux version 2.4.9-32.5smp (bhcompile@george.devel.redhat.com) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-102)) #1 SMP Tue Jun 25 04:03:46 EDT 2002
Booting GENERIC on Tsunami variation Catamaran using machine vector DP264 from SRM
Command line: root=/dev/sda1 console=tty0
memcluster 0, usage 1, start 0, end 256
memcluster 1, usage 0, start 256, end 130989
memcluster 2, usage 1, start 130989, end 131072
freeing pages 256:1024
freeing pages 1689:130989
reserving pages 1689:1691
Initial ramdisk at: 0xfffffc003fd02000 (1063322 bytes)
SMP: 2 CPUs probed -- cpu_present_mask = 3
On node 0 totalpages: 130989
zone(0): 130989 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/sda1 console=tty0
Using epoch = 1952
Console: colour VGA+ 80x25
Calibrating delay loop... 1204.44 BogoMIPS
Memory: 1017664k/1047912k available (2228k kernel code, 24104k reserved, 2044k data, 368k init)
Dentry-cache hash table entries: 131072 (order: 8, 2097152 bytes)
Inode-cache hash table entries: 65536 (order: 7, 1048576 bytes)
Mount-cache hash table entries: 16384 (order: 5, 262144 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 524288 bytes)
Page-cache hash table entries: 131072 (order: 8, 2097152 bytes)
POSIX conformance testing by UNIFIX
SMP starting up secondaries.
Calibrating delay loop... 1326.92 BogoMIPS
Truly bogus BogoMIPS, using boot CPU value.
SMP: Total of 2 processors activated (2414.13 BogoMIPS).
SMC37c669 Super I/O Controller found @ 0x3f0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd v1.8
VFS: Diskquotas version dquot_6.5.0 initialized
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
block: queued sectors max/low 674304kB/543232kB, 1984 slots per queue
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz PCI bus speed for PIO modes; override with idebus=xx
CY82C693: IDE controller on PCI bus 00 dev 29
CY82C693: chipset revision 0
CY82C693: not 100% native mode: will probe irqs later
CY82C693U driver v0.34 99-13-12 Andreas S. Krebs (akrebs@altavista.net)
ide0: BM-DMA at 0x8800-0x8807, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x8808-0x880f, BIOS settings: hdc:pio, hdd:pio
hda: CD-224E, ATAPI CD/DVD-ROM drive
ide: Assuming 33MHz PCI bus speed for PIO modes; override with idebus=xx
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Floppy drive(s): fd0 is 2.88M
FDC 0 is a post-1991 82077
SCSI subsystem driver Revision: 1.00
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 128Kbytes
TCP: Hash tables configured (established 65536 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 1038k freed
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<Adaptec aic7895 Ultra SCSI adapter>
aic7895C: Ultra Wide Channel A, SCSI Id=7, 32/253 SCBs

scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<Adaptec aic7895 Ultra SCSI adapter>
aic7895C: Ultra Wide Channel B, SCSI Id=7, 32/253 SCBs

sym53c8xx: at PCI bus 1, device 0, function 0
sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
sym53c8xx: 53c875 detected with Symbios NVRAM
sym53c8xx: at PCI bus 1, device 1, function 0
sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
sym53c8xx: 53c875 detected with Symbios NVRAM
sym53c8xx: at PCI bus 2, device 7, function 0
sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
sym53c8xx: 53c895 detected with Symbios NVRAM
sym53c875-0: rev 0x4 on pci bus 1 device 0 function 0 irq 27
sym53c875-0: Symbios format NVRAM, ID 7, Fast-20, Parity Checking
sym53c875-0: on-chip RAM at 0x18060000
sym53c875-0: restart (scsi reset).
sym53c875-0: Downloading SCSI SCRIPTS.
sym53c875-1: rev 0x4 on pci bus 1 device 1 function 0 irq 26
sym53c875-1: Symbios format NVRAM, ID 7, Fast-20, Parity Checking
sym53c875-1: on-chip RAM at 0x18061000
sym53c875-1: restart (scsi reset).
sym53c875-1: Downloading SCSI SCRIPTS.
sym53c895-2: rev 0x2 on pci bus 2 device 7 function 0 irq 47
sym53c895-2: Symbios format NVRAM, ID 7, Fast-40, Parity Checking
sym53c895-2: on-chip RAM at 0x9230000
sym53c895-2: restart (scsi reset).
sym53c895-2: Downloading SCSI SCRIPTS.
scsi2 : sym53c8xx-1.7.3c-20010512
scsi3 : sym53c8xx-1.7.3c-20010512
scsi4 : sym53c8xx-1.7.3c-20010512
Vendor: COMPAQ Model: SDT-9000 Rev: 4.05
Type: Sequential-Access ANSI SCSI revision: 02
Vendor: COMPAQ Model: BD009122C6 Rev: B016
Type: Direct-Access ANSI SCSI revision: 02
sym53c895-2-<0,0>: tagged command queue depth set to 8
Attached scsi disk sda at scsi4, channel 0, id 0, lun 0
sym53c895-2-<0,*>: FAST-40 WIDE SCSI 80.0 MB/s (25.0 ns, offset 31)
SCSI device sda: 17773524 512-byte hdwr sectors (9100 MB)
Partition check:
sda: sda1 sda2
ISP SCSI and Fibre Channel Host Adapter Driver
Linux Platform Version 2.1
Common Core Code Version 2.6
Built on Jun 25 2002, 04:11:16
isp0: Differential Mode
isp0: Ultra Mode Capable
isp0: Board Type 1040B, Chip Revision 0x5, loaded F/W Revision 4.66.0
isp0: Last F/W revision was 5.57.1
scsi5 : Driver for a Qlogic ISP 1020/1040 Host Adapter
Vendor: DEC Model: HSZ22 (C) DEC Rev: D11W
Type: Direct-Access ANSI SCSI revision: 02
scsi: unknown type 31
Vendor: DEC Model: HSZ22 (C) DEC Rev: D11W
Type: Unknown ANSI SCSI revision: 02
Attached scsi disk sdb at scsi5, channel 0, id 0, lun 0
resize_dma_pool: unknown device type 31
SCSI device sdb: 35524608 512-byte hdwr sectors (18189 MB)
sdb: sdb1
ncr53c8xx: at PCI bus 1, device 0, function 0
ncr53c8xx: IO region 0x9000[0..127] is in use
ncr53c8xx: at PCI bus 1, device 1, function 0
ncr53c8xx: IO region 0x9400[0..127] is in use
ncr53c8xx: at PCI bus 2, device 7, function 0
ncr53c8xx: IO region 0x200008000[0..127] is in use
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 368k freed
rtc: Digital UNIX epoch (1952) detected
Real Time Clock Driver v1.10e
Adding Swap: 1201624k swap-space (priority -1)
EXT3 FS 2.4-0.9.11, 3 Oct 2001 on sd(8,1), internal journal
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: checktime reached, running e2fsck is recommended
EXT3 FS 2.4-0.9.11, 3 Oct 2001 on sd(8,17), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
st: Version 20010812, bufsize 32768, wrt 30720, max init. bufs 4, s/g segs 16
Attached scsi tape st0 at scsi3, channel 0, id 4, lun 0
resize_dma_pool: unknown device type 31
[/code:1:1de4783020]

70+fa, de most láttam egy linket, ahol refubrished-ként ugyanez $8000 ;)