Twonky 6.0.39 Install

1) In your web browser go to your WD My Book Live Local Network Interface at: YOUR MYBOOK LIVE IP ADDRESS/UI (ie:http://192.168.0.xxx/UI)

2) Go to "Settings"

3) Go to "Utilities"

4) Go to "Import/Export Current Configuration", then click "Save Config File".

5) Open saved file with a text editor ie: notepad.

6) In the text file look for "ssh_enable="disabled" and change to "ssh_enable="enabled" and save.

7) Go back to the Import/Export Current Configuration and import the file you just edited. This now enables SSH on your drive for the Putty program to work.

8) To to Setting->Media and turn off TWONKY Service (uncheck enable)

9) Download free Putty SSH software at: Http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html

10) Enter the My Book Live IP address (ie:192.168.0.xxx) in the Host Name box in Putty.

11) The username is: root password is: welc0me (the O in welcome is the number ZERO)

12) Just copy and paste the following commands in the terminal:

cd /usr/local/
mv twonkymedia-5 twonky5old
mkdir twonkymedia-5
cd twonkymedia-5
wget http://www.twonkyforum.com/downloads/6.0.39/twonkymedia-powerpc-glibc-2…
unzip twonkymedia-powerpc-glibc-2.2.5-6.0.39.zip
mv /usr/local/sbin/writeTwonkyContentDir.sh /usr/local/sbin/writeTwonkyContentDir.sh.old
reboot

13) After reboot enable the TWONKY service from Settings->Media. You can also configure TWONKY with LIVE IP ADDRESS:9000 i.e.. Http://192.168.0.xxx:9000/

14) If you have a license then put it there to register the 30 day trial version. I can verify that V serial works.

15) Enjoy !

16 Optional) If you have a Samsung TV you may need to set "SAMSUNG TV" on config twonky (http://yourip:9000/config) for media receiver. The problem is that for each media receiver the access to the server can be restricted, and the Twonky can't detect Samsung TV automatically sometimes.

Hozzászólások

Köszi, az ssh-s trükköt kipróbálom.

Frissítettem kettőt a WD TV Live Hub-on, azóta nem mutat SMB share-t, megnézném miért.