Na ezzel mindig szívok.
RAID bus controller: 3ware Inc 9650SE SATA-II RAID PCIe (rev 01)
Ott így működik:
smartctl -a -d 3ware,1 /dev/twa0
Anno ezt az eszközfájlt ajánlották. Gond nélkül megy. Máshol nincs is ilyen eszközfájlom.
Ha sdc-t használnék, akkor:
Read Device Identity failed: Input/output error
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.-T permissive kapcsolóval:
Read Device Identity failed: Input/output error
=== START OF INFORMATION SECTION ===
Device Model: [No Information Found]
Serial Number: [No Information Found]
Firmware Version: [No Information Found]
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: [No Information Found]
Local Time is: Tue Feb 28 21:28:33 2017 CET
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled.
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
Így nem is erőltettem megaraiddes szerverben, mert ott szintén nem megy:
# smartctl -a -d megaraid,1 /dev/sdc
Smartctl open device: /dev/sdc [megaraid_disk_02] failed: INQUIRY failed