Köszönöm (spymorass-nak is) a segítséget.
Telepítettem a megacli csomagot és az alábbi parancsot futtattam le:
# megacli -LDInfo -Lall -aALL
Adapter 0 -- Virtual Drive Information:
Virtual Disk: 0 (Target Id: 0)
Name:
RAID Level: Primary-5, Secondary-0, RAID Level Qualifier-3
Size:1.362 TB
State: Optimal
Stripe Size: 64 KB
Number Of Drives:4
Span Depth:1
Default Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU
Current Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU
Access Policy: Read/Write
Disk Cache Policy: Disk's Default
Encryption Type: None
Exit Code: 0x00
A State: Optimal-t én úgy értelmezem, hogy minden rendben van.
Telepítettem a megaclisas-status csomagot is, majd futtattam, az eredmény a http://hup.hu/node/109211#comment-1380005 válaszban olvasható.
És ebből a státusz kimenetből is azt olvasom ki, hogy minden rendben van.
De akkor miért jelez???