Keresek régebbi Thinkpad-et


00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
02:00.0 CardBus bridge: Texas Instruments PCI4520 PC card Cardbus Controller (rev 01)
02:00.1 CardBus bridge: Texas Instruments PCI4520 PC card Cardbus Controller (rev 01)
02:01.0 Ethernet controller: Intel Corporation 82540EP Gigabit Ethernet Controller (Mobile) (rev 03)
02:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)



[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-19-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Aug 20 22:56:21 UTC 2008 (Ubuntu 2.6.24-19.41-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000002ff50000 (usable)
[ 0.000000] BIOS-e820: 000000002ff50000 - 000000002ff67000 (ACPI data)
[ 0.000000] BIOS-e820: 000000002ff67000 - 000000002ff79000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000002ff80000 - 0000000030000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 767MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 196432) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 196432
[ 0.000000] HighMem 196432 -> 196432
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 196432
[ 0.000000] On node 0 totalpages: 196432
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1502 pages used for memmap
[ 0.000000] Normal zone: 190834 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6D70 checksum 0
[ 0.000000] ACPI: RSDP 000F6D70, 0024 (r2 IBM )
[ 0.000000] ACPI: XSDT 2FF5A6BD, 004C (r1 IBM TP-1R 3210 LTP 0)
[ 0.000000] ACPI: FACP 2FF5A800, 00F4 (r3 IBM TP-1R 3210 IBM 1)
[ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126]
[ 0.000000] ACPI: DSDT 2FF5A9E7, C4E5 (r1 IBM TP-1R 3210 MSFT 100000E)
[ 0.000000] ACPI: FACS 2FF78000, 0040
[ 0.000000] ACPI: SSDT 2FF5A9B4, 0033 (r1 IBM TP-1R 3210 MSFT 100000E)
[ 0.000000] ACPI: ECDT 2FF66ECC, 0052 (r1 IBM TP-1R 3210 IBM 1)
[ 0.000000] ACPI: TCPA 2FF66F1E, 0032 (r1 IBM TP-1R 3210 PTL 1)
[ 0.000000] ACPI: BOOT 2FF66FD8, 0028 (r1 IBM TP-1R 3210 LTP 1)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 30000000:cf800000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194898
[ 0.000000] Kernel command line: root=UUID=595ce525-c5b6-42f1-8c9c-071f7e885edb ro quiet splash
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffb000 (0160e000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1698.663 MHz processor.
[ 3.868032] Console: colour VGA+ 80x25
[ 3.868038] console [tty0] enabled
[ 3.868623] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 3.869190] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 3.889540] Memory: 766596k/785728k available (2177k kernel code, 18528k reserved, 1006k data, 368k init, 0k highmem)
[ 3.889548] virtual kernel memory layout:
[ 3.889549] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 3.889551] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 3.889552] vmalloc : 0xf0800000 - 0xff7fe000 ( 239 MB)
[ 3.889553] lowmem : 0xc0000000 - 0xeff50000 ( 767 MB)
[ 3.889554] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 3.889556] .data : 0xc03204c4 - 0xc041bdc4 (1006 kB)
[ 3.889557] .text : 0xc0100000 - 0xc03204c4 (2177 kB)
[ 3.889560] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 3.889599] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 3.969508] Calibrating delay using timer specific routine.. 3399.66 BogoMIPS (lpj=6799324)
[ 3.969535] Security Framework initialized
[ 3.969542] SELinux: Disabled at boot.
[ 3.969557] AppArmor: AppArmor initialized
[ 3.969561] Failure registering capabilities with primary security module.
[ 3.969569] Mount-cache hash table entries: 512
[ 3.969692] Initializing cgroup subsys ns
[ 3.969697] Initializing cgroup subsys cpuacct
[ 3.969708] CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 00000000
[ 3.969719] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 3.969721] CPU: L2 cache: 2048K
[ 3.969724] CPU: After all inits, caps: afe9f9bf 00000000 00000000 00002040 00000180 00000000 00000000 00000000
[ 3.969734] Compat vDSO mapped to ffffe000.
[ 3.969746] Checking 'hlt' instruction... OK.
[ 3.985872] SMP alternatives: switching to UP code
[ 3.987752] Freeing SMP alternatives: 11k freed
[ 3.987856] Early unpacking initramfs... done
[ 4.349936] ACPI: Core revision 20070126
[ 4.350046] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 4.354201] ACPI: setting ELCR to 0200 (from 0800)
[ 4.364263] CPU0: Intel(R) Pentium(R) M processor 1.70GHz stepping 06
[ 4.364269] SMP motherboard not detected.
[ 4.364271] Local APIC not detected. Using dummy APIC emulation.
[ 4.364314] Brought up 1 CPUs
[ 4.364334] CPU0 attaching sched-domain:
[ 4.364337] domain 0: span 01
[ 4.364338] groups: 01
[ 4.364513] net_namespace: 64 bytes
[ 4.364520] Booting paravirtualized kernel on bare hardware
[ 4.364972] Time: 11:21:46 Date: 03/24/09
[ 4.364997] NET: Registered protocol family 16
[ 4.365182] EISA bus registered
[ 4.365194] ACPI: bus type pci registered
[ 4.365411] PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8
[ 4.365413] PCI: Using configuration type 1
[ 4.365420] Setting up standard PCI resources
[ 4.367743] ACPI: EC: EC description table is found, configuring boot EC
[ 4.372845] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 4.375523] ACPI: Interpreter enabled
[ 4.375526] ACPI: (supports S0 S3 S4 S5)
[ 4.375539] ACPI: Using PIC for interrupt routing
[ 4.381770] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 4.381773] ACPI: EC: driver started in poll mode
[ 4.381905] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 4.382279] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 4.382283] PCI quirk: region 1180-11bf claimed by ICH4 GPIO
[ 4.382784] PCI: Transparent bridge - 0000:00:1e.0
[ 4.382880] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 4.382934] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 4.382957] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 4.386421] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 4.386604] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 4.386784] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 4.386963] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 4.387128] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 4.387298] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 4.387463] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 4.387644] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 4.387785] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 4.387867] ACPI: Power Resource [PUBS] (on)
[ 4.387910] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 4.387941] pnp: PnP ACPI init
[ 4.387949] ACPI: bus type pnp registered
[ 4.388969] pnpacpi: exceeded the max number of mem resources: 12
[ 4.391051] pnp: PnP ACPI: found 12 devices
[ 4.391053] ACPI: ACPI bus type pnp unregistered
[ 4.391057] PnPBIOS: Disabled by ACPI PNP
[ 4.391263] PCI: Using ACPI for IRQ routing
[ 4.391265] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 4.408932] NET: Registered protocol family 8
[ 4.408934] NET: Registered protocol family 20
[ 4.408991] AppArmor: AppArmor Filesystem Enabled
[ 4.412895] Time: tsc clocksource has been installed.
[ 4.420918] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 4.420922] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
[ 4.420925] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
[ 4.420927] system 00:00: iomem range 0xc8000-0xcbfff could not be reserved
[ 4.420930] system 00:00: iomem range 0xcc000-0xcffff could not be reserved
[ 4.420933] system 00:00: iomem range 0x0-0x0 could not be reserved
[ 4.420936] system 00:00: iomem range 0x0-0x0 could not be reserved
[ 4.420939] system 00:00: iomem range 0x0-0x0 could not be reserved
[ 4.420942] system 00:00: iomem range 0xdc000-0xdffff has been reserved
[ 4.420945] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
[ 4.420948] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
[ 4.420951] system 00:00: iomem range 0xe8000-0xebfff could not be reserved
[ 4.420957] system 00:02: ioport range 0x1000-0x107f has been reserved
[ 4.420960] system 00:02: ioport range 0x1180-0x11bf has been reserved
[ 4.420963] system 00:02: ioport range 0x15e0-0x15ef has been reserved
[ 4.420965] system 00:02: ioport range 0x1600-0x162f has been reserved
[ 4.420968] system 00:02: ioport range 0x1632-0x167f has been reserved
[ 4.420971] system 00:02: ioport range 0x1630-0x1631 has been reserved
[ 4.451320] PCI: Bridge: 0000:00:01.0
[ 4.451323] IO window: 3000-3fff
[ 4.451326] MEM window: c0100000-c01fffff
[ 4.451330] PREFETCH window: e0000000-e7ffffff
[ 4.451340] PCI: Bus 3, cardbus bridge: 0000:02:00.0
[ 4.451343] IO window: 00004000-000040ff
[ 4.451346] IO window: 00004400-000044ff
[ 4.451350] PREFETCH window: e8000000-ebffffff
[ 4.451354] MEM window: c4000000-c7ffffff
[ 4.451358] PCI: Bus 7, cardbus bridge: 0000:02:00.1
[ 4.451360] IO window: 00004800-000048ff
[ 4.451363] IO window: 00004c00-00004cff
[ 4.451367] PREFETCH window: ec000000-efffffff
[ 4.451371] MEM window: c8000000-cbffffff
[ 4.451375] PCI: Bridge: 0000:00:1e.0
[ 4.451378] IO window: 4000-8fff
[ 4.451382] MEM window: c0200000-cfffffff
[ 4.451386] PREFETCH window: e8000000-efffffff
[ 4.451400] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 4.451732] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 4.451735] PCI: setting IRQ 11 as level-triggered
[ 4.451739] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 4.452056] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 4.452058] ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 4.452072] NET: Registered protocol family 2
[ 4.488851] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 4.489083] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 4.490033] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 4.490661] TCP: Hash tables configured (established 131072 bind 65536)
[ 4.490665] TCP reno registered
[ 4.500947] checking if image is initramfs... it is
[ 4.952169] Switched to high resolution mode on CPU 0
[ 5.217805] Freeing initrd memory: 7442k freed
[ 5.218033] Simple Boot Flag at 0x35 set to 0x1
[ 5.218384] audit: initializing netlink socket (disabled)
[ 5.218402] audit(1237893706.328:1): initialized
[ 5.220510] VFS: Disk quotas dquot_6.5.1
[ 5.220589] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 5.220736] io scheduler noop registered
[ 5.220738] io scheduler anticipatory registered
[ 5.220740] io scheduler deadline registered
[ 5.220752] io scheduler cfq registered (default)
[ 5.220824] Boot video device is 0000:01:00.0
[ 5.221106] isapnp: Scanning for PnP cards...
[ 5.573596] isapnp: No Plug & Play device found
[ 5.600402] Real Time Clock Driver v1.12ac
[ 5.600514] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 5.601447] serial 00:09: activated
[ 5.601652] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 5.601819] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 5.601829] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[ 5.602427] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 5.602498] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 5.602595] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 5.607959] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.607963] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.619240] mice: PS/2 mouse device common for all mice
[ 5.619349] EISA: Probing bus 0 at eisa.0
[ 5.619355] Cannot allocate resource for EISA slot 1
[ 5.619358] Cannot allocate resource for EISA slot 2
[ 5.619360] Cannot allocate resource for EISA slot 3
[ 5.619362] Cannot allocate resource for EISA slot 4
[ 5.619364] Cannot allocate resource for EISA slot 5
[ 5.619366] Cannot allocate resource for EISA slot 6
[ 5.619369] Cannot allocate resource for EISA slot 7
[ 5.619371] Cannot allocate resource for EISA slot 8
[ 5.619373] EISA: Detected 0 cards.
[ 5.619376] cpuidle: using governor ladder
[ 5.619378] cpuidle: using governor menu
[ 5.619471] NET: Registered protocol family 1
[ 5.619497] Using IPI No-Shortcut mode
[ 5.619534] registered taskstats version 1
[ 5.619635] Magic number: 1:772:378
[ 5.619716] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 5.619718] EDD information not available.
[ 5.619985] Freeing unused kernel memory: 368k freed
[ 5.623295] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 6.818432] fuse init (API version 7.9)
[ 6.841194] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 6.841200] ACPI: Processor [CPU] (supports 8 throttling states)
[ 6.843189] ACPI: Thermal Zone [THM0] (45 C)
[ 7.461221] usbcore: registered new interface driver usbfs
[ 7.461247] usbcore: registered new interface driver hub
[ 7.475647] usbcore: registered new device driver usb
[ 7.487585] USB Universal Host Controller Interface driver v3.0
[ 7.487649] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 7.487661] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 7.487666] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 7.488028] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 7.488053] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
[ 7.488187] usb usb1: configuration #1 chosen from 1 choice
[ 7.488213] hub 1-0:1.0: USB hub found
[ 7.488218] hub 1-0:1.0: 2 ports detected
[ 7.540661] SCSI subsystem initialized
[ 7.588861] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 7.588866] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 7.588878] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 7.588883] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 7.588907] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 7.588931] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
[ 7.589037] usb usb2: configuration #1 chosen from 1 choice
[ 7.589062] hub 2-0:1.0: USB hub found
[ 7.589068] hub 2-0:1.0: 2 ports detected
[ 7.604373] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[ 7.604377] Copyright (c) 1999-2006 Intel Corporation.
[ 7.611508] libata version 3.00 loaded.
[ 7.692719] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 7.692724] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 7.692736] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 7.692741] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 7.692766] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 7.692790] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
[ 7.692901] usb usb3: configuration #1 chosen from 1 choice
[ 7.692925] hub 3-0:1.0: USB hub found
[ 7.692931] hub 3-0:1.0: 2 ports detected
[ 7.797289] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 7.797294] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 7.797310] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 7.797314] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 7.797341] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 7.801236] ehci_hcd 0000:00:1d.7: debug port 1
[ 7.801242] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 7.801251] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000
[ 7.816042] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 7.816167] usb usb4: configuration #1 chosen from 1 choice
[ 7.816195] hub 4-0:1.0: USB hub found
[ 7.816200] hub 4-0:1.0: 6 ports detected
[ 7.920085] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 8.174246] e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:10:c6:e1:de:51
[ 8.208543] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 8.208646] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[ 8.208653] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 8.208692] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 8.208706] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 8.211808] ata_piix 0000:00:1f.1: version 2.12
[ 8.211819] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 8.211846] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 8.212363] scsi0 : ata_piix
[ 8.212795] scsi1 : ata_piix
[ 8.213683] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
[ 8.213686] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
[ 8.375830] ata1.00: ATA-6: HTS541040G9AT00, MB2IA60A, max UDMA/100
[ 8.375835] ata1.00: 78140160 sectors, multi 16: LBA
[ 8.383235] usb 4-4: new high speed USB device using ehci_hcd and address 2
[ 8.391736] ata1.00: configured for UDMA/100
[ 8.524386] usb 4-4: configuration #1 chosen from 1 choice
[ 8.538937] usbcore: registered new interface driver libusual
[ 8.544526] Initializing USB Mass Storage driver...
[ 8.545083] scsi2 : SCSI emulation for USB Mass Storage devices
[ 8.545486] usbcore: registered new interface driver usb-storage
[ 8.545489] USB Mass Storage support registered.
[ 8.545540] usb-storage: device found at 2
[ 8.545542] usb-storage: waiting for device to settle before scanning
[ 8.711062] ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4242N, 0J04, max UDMA/33
[ 8.882746] ata2.00: configured for UDMA/33
[ 8.882867] scsi 0:0:0:0: Direct-Access ATA HTS541040G9AT00 MB2I PQ: 0 ANSI: 5
[ 8.884923] scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4242N 0J04 PQ: 0 ANSI: 5
[ 8.895877] Driver 'sd' needs updating - please use bus_type methods
[ 8.895951] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
[ 8.895963] sd 0:0:0:0: [sda] Write Protect is off
[ 8.895966] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8.895982] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.896030] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
[ 8.896039] sd 0:0:0:0: [sda] Write Protect is off
[ 8.896042] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8.896057] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.896060] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 8.922614] sda1 sda2 < sda5 >
[ 8.957895] sd 0:0:0:0: [sda] Attached SCSI disk
[ 8.963460] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 8.963480] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 8.963554] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 8.963557] Uniform CD-ROM driver Revision: 3.20
[ 8.963593] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 9.215591] Attempting manual resume
[ 9.215596] swsusp: Resume From Partition 8:5
[ 9.215598] PM: Checking swsusp image.
[ 9.215769] PM: Resume from disk failed.
[ 9.227938] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 9.227942] EXT3-fs: write access will be enabled during recovery.
[ 10.964974] kjournald starting. Commit interval 5 seconds
[ 10.964991] EXT3-fs: sda1: orphan cleanup on readonly fs
[ 10.964997] ext3_orphan_cleanup: deleting unreferenced inode 1974285
[ 10.965019] EXT3-fs: sda1: 1 orphan inode deleted
[ 10.965021] EXT3-fs: recovery complete.
[ 10.967646] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.536158] usb-storage: device scan complete
[ 13.537150] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
[ 13.538374] sd 2:0:0:0: [sdb] 15646720 512-byte hardware sectors (8011 MB)
[ 13.538999] sd 2:0:0:0: [sdb] Write Protect is off
[ 13.539002] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 13.539005] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 13.541618] sd 2:0:0:0: [sdb] 15646720 512-byte hardware sectors (8011 MB)
[ 13.542243] sd 2:0:0:0: [sdb] Write Protect is off
[ 13.542246] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 13.542248] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 13.542251] sdb: sdb1
[ 13.543048] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 13.543080] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 20.425998] Clocksource tsc unstable (delta = -717978078 ns)
[ 20.429980] Time: acpi_pm clocksource has been installed.
[ 21.999776] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 22.414661] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 22.456783] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 22.491008] Non-volatile memory driver v1.2
[ 22.564244] irda_init()
[ 22.564263] NET: Registered protocol family 23
[ 22.646737] Linux agpgart interface v0.102
[ 22.698653] iTCO_vendor_support: vendor-support=0
[ 22.750575] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 22.750656] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
[ 22.750687] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 22.885687] parport_pc 00:0a: activated
[ 22.885692] parport_pc 00:0a: reported by Plug and Play ACPI
[ 22.885730] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[ 23.035677] thinkpad_acpi: ThinkPad ACPI Extras v0.17
[ 23.035681] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 23.035683] thinkpad_acpi: ThinkPad BIOS 1RETDPWW (3.21 ), EC 1RHT71WW-3.04
[ 23.035685] thinkpad_acpi: IBM ThinkPad T42
[ 23.038878] thinkpad_acpi: another device driver is already handling bay events
[ 23.038882] thinkpad_acpi: disabling subdriver bay
[ 23.040817] input: ThinkPad Extra Buttons as /devices/virtual/input/input3
[ 23.092766] nsc-ircc 00:0b: activated
[ 23.092771] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1.
[ 23.092929] nsc-ircc, chip->init
[ 23.092938] nsc-ircc, Found chip at base=0x02e
[ 23.092961] nsc-ircc, driver loaded (Dag Brattli)
[ 23.093211] IrDA: Registered device irda0
[ 23.093213] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
[ 23.162000] agpgart: Detected an Intel 855PM Chipset.
[ 23.175652] agpgart: AGP aperture is 256M @ 0xd0000000
[ 23.257810] intel_rng: FWH not detected
[ 23.289854] input: Power Button (FF) as /devices/virtual/input/input4
[ 23.317730] ACPI: Power Button (FF) [PWRF]
[ 23.317791] input: Lid Switch as /devices/virtual/input/input5
[ 23.341735] ACPI: Lid Switch [LID]
[ 23.341799] input: Sleep Button (CM) as /devices/virtual/input/input6
[ 23.373663] ACPI: Sleep Button (CM) [SLPB]
[ 23.851158] Yenta: CardBus bridge found at 0000:02:00.0 [1014:0552]
[ 23.851177] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 23.851179] Yenta: Routing CardBus interrupts to PCI
[ 23.851184] Yenta TI: socket 0000:02:00.0, mfunc 0x01d21b22, devctl 0x64
[ 23.976775] ieee80211_crypt: registered algorithm 'NULL'
[ 24.041680] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 24.041684] ieee80211: Copyright (C) 2004-2005 Intel Corporation
[ 24.081131] Yenta: ISA IRQ mask 0x0470, PCI irq 11
[ 24.081136] Socket status: 30000086
[ 24.081139] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
[ 24.081142] cs: IO port probe 0x4000-0x8fff: clean.
[ 24.082380] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
[ 24.082384] pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
[ 24.210760] Yenta: CardBus bridge found at 0000:02:00.1 [1014:0552]
[ 24.210777] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 24.210779] Yenta: Routing CardBus interrupts to PCI
[ 24.210784] Yenta TI: socket 0000:02:00.1, mfunc 0x01d21b22, devctl 0x64
[ 24.261598] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 24.261602] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 24.440615] Yenta: ISA IRQ mask 0x0470, PCI irq 11
[ 24.440621] Socket status: 30000086
[ 24.440625] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
[ 24.440628] cs: IO port probe 0x4000-0x8fff: clean.
[ 24.441866] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
[ 24.441869] pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
[ 24.488020] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 24.527829] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 24.550960] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
[ 24.550967] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 24.592085] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 24.875862] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/LNXVIDEO:00/input/input8
[ 24.907386] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 25.428323] ACPI: AC Adapter [AC] (on-line)
[ 25.474445] ACPI: Battery Slot [BAT0] (battery present)
[ 27.102548] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
[ 27.102596] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 27.102625] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 27.166994] cs: IO port probe 0x100-0x3af: clean.
[ 27.167976] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 27.168396] cs: IO port probe 0x820-0x8ff: clean.
[ 27.168752] cs: IO port probe 0xc00-0xcf7: clean.
[ 27.169239] cs: IO port probe 0xa00-0xaff: clean.
[ 27.176697] cs: IO port probe 0x100-0x3af: clean.
[ 27.177676] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 27.178096] cs: IO port probe 0x820-0x8ff: clean.
[ 27.178453] cs: IO port probe 0xc00-0xcf7: clean.
[ 27.178937] cs: IO port probe 0xa00-0xaff: clean.
[ 27.324687] intel8x0_measure_ac97_clock: measured 55492 usecs
[ 27.324690] intel8x0: clocking to 48000
[ 27.584004] lp0: using parport0 (interrupt-driven).
[ 27.629995] Adding 1646620k swap on /dev/sda5. Priority:-1 extents:1 across:1646620k
[ 115.417617] EXT3 FS on sda1, internal journal
[ 115.968623] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 116.317567] ACPI: ACPI Dock Station Driver
[ 116.402025] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: found ejectable bay
[ 116.402031] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: Adding notify handler
[ 116.402067] ACPI: Error installing bay notify handler
[ 116.402072] ACPI: Bay [\_SB_.PCI0.IDE0.SCND.MSTR] Added
[ 117.323965] IBM machine detected. Enabling interrupts during APM calls.
[ 117.323971] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 117.323973] apm: overridden by ACPI.
[ 117.485115] ppdev: user-space parallel port driver
[ 117.568080] audit(1237893822.568:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5594 profile="/usr/sbin/cupsd" namespace="default"
[ 117.687263] input: /usr/sbin/thinkpad-keys as /devices/virtual/input/input9
[ 335.568846] Marking TSC unstable due to: cpufreq changes.
[ 341.590497] Bluetooth: Core ver 2.11
[ 341.591677] NET: Registered protocol family 31
[ 341.591686] Bluetooth: HCI device and connection manager initialized
[ 341.591696] Bluetooth: HCI socket layer initialized
[ 341.635949] Bluetooth: L2CAP ver 2.9
[ 341.635960] Bluetooth: L2CAP socket layer initialized
[ 341.741791] Bluetooth: RFCOMM socket layer initialized
[ 341.742229] Bluetooth: RFCOMM TTY layer initialized
[ 341.742238] Bluetooth: RFCOMM ver 1.8
[ 121.565210] [drm] Initialized drm 1.1.0 20060810
[ 121.579306] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 121.580076] [drm] Initialized radeon 1.28.0 20060524 on minor 0
[ 347.967252] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 347.967723] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 347.968115] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 348.191867] [drm] Setting GART location based on new memory map
[ 348.191940] [drm] writeback test succeeded in 2 usecs
[ 369.962477] NET: Registered protocol family 10
[ 369.963516] lo: Disabled Privacy Extensions
[ 369.965113] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 136.929083] eth1: no IPv6 routers present
[ 142.435843] UDF-fs: No VRS found
[ 142.515324] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 142.515833] ISOFS: changing to secondary root
[ 904.259782] usb 4-4: USB disconnect, address 2
[ 959.726877] usb 4-4: new high speed USB device using ehci_hcd and address 3
[ 959.869825] usb 4-4: configuration #1 chosen from 1 choice
[ 959.920557] scsi3 : SCSI emulation for USB Mass Storage devices
[ 959.927061] usb-storage: device found at 3
[ 959.927070] usb-storage: waiting for device to settle before scanning
[ 962.792312] usb-storage: device scan complete
[ 962.793692] scsi 3:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
[ 339.491065] sd 3:0:0:0: [sdb] 15646720 512-byte hardware sectors (8011 MB)
[ 339.491813] sd 3:0:0:0: [sdb] Write Protect is off
[ 339.491816] sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 339.491819] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 339.494431] sd 3:0:0:0: [sdb] 15646720 512-byte hardware sectors (8011 MB)
[ 339.495058] sd 3:0:0:0: [sdb] Write Protect is off
[ 339.495061] sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 339.495063] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 339.495067] sdb: sdb1
[ 339.495877] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 339.495919] sd 3:0:0:0: Attached scsi generic sg2 type 0



SMBIOS 2.33 present.
61 structures occupying 2126 bytes.
Table at 0x000E0010.


Handle 0x0000, DMI type 0, 20 bytes
BIOS Information
Vendor: IBM
Version: 1RETDPWW (3.21 )
Release Date: 06/02/2006
Address: 0xDC000
Runtime Size: 144 kB
ROM Size: 1024 kB
Characteristics:
PCI is supported
PC Card (PCMCIA) is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
EDD is supported
3.5"/720 KB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
AGP is supported
BIOS boot specification is supported

Handle 0x0001, DMI type 1, 25 bytes
System Information
Manufacturer: IBM
Product Name: 23737WG
Version: ThinkPad T42
Serial Number: L31552E
UUID: 08E6BA01-479C-11CB-9FF5-E67ED730B2C7
Wake-up Type: Power Switch

Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: IBM
Product Name: 23737WG
Version: Not Available
Serial Number: VJ0B65CG2HL

Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer: IBM
Type: Notebook
Lock: Not Present
Version: Not Available
Serial Number: Not Available
Asset Tag: No Asset Information
Boot-up State: Unknown
Power Supply State: Unknown
Thermal State: Unknown
Security Status: Unknown
OEM Information: 0x00000000

Handle 0x0004, DMI type 126, 17 bytes
Inactive

Handle 0x0005, DMI type 126, 17 bytes
Inactive

Handle 0x0006, DMI type 4, 35 bytes
Processor Information
Socket Designation: None
Type: Central Processor
Family: Pentium M
Manufacturer: GenuineIntel
ID: D6 06 00 00 BF F9 E9 AF
Signature: Type 0, Family 6, Model 13, Stepping 6
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) Pentium(R) M processor
Voltage: 1.3 V
External Clock: 400 MHz
Max Speed: 1700 MHz
Current Speed: 1700 MHz
Status: Populated, Enabled
Upgrade: None
L1 Cache Handle: 0x000A
L2 Cache Handle: 0x000B
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified

Handle 0x0007, DMI type 5, 20 bytes
Memory Controller Information
Error Detecting Method: None
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 1024 MB
Maximum Total Memory Size: 2048 MB
Supported Speeds:
Other
Supported Memory Types:
DIMM
SDRAM
Memory Module Voltage: 2.9 V
Associated Memory Slots: 2
0x0008
0x0009
Enabled Error Correcting Capabilities:
None

Handle 0x0008, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM Slot 1
Bank Connections: 0 1
Current Speed: Unknown
Type: DIMM SDRAM
Installed Size: 512 MB (Double-bank Connection)
Enabled Size: 512 MB (Double-bank Connection)
Error Status: OK

Handle 0x0009, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM Slot 2
Bank Connections: 2 3
Current Speed: Unknown
Type: DIMM SDRAM
Installed Size: 256 MB (Double-bank Connection)
Enabled Size: 256 MB (Double-bank Connection)
Error Status: OK

Handle 0x000A, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal L1 Cache
Configuration: Enabled, Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 32 KB
Maximum Size: 32 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Other
Associativity: 8-way Set-associative

Handle 0x000B, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal L2 Cache
Configuration: Enabled, Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 2048 KB
Maximum Size: 2048 KB
Supported SRAM Types:
Burst
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Multi-bit ECC
System Type: Unified
Associativity: 8-way Set-associative

Handle 0x000C, DMI type 126, 9 bytes
Inactive

Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Available
Internal Connector Type: None
External Reference Designator: Infrared
External Connector Type: Infrared
Port Type: Other

Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Available
Internal Connector Type: None
External Reference Designator: Parallel
External Connector Type: DB-25 female
Port Type: Parallel Port ECP/EPP

Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Available
Internal Connector Type: None
External Reference Designator: External Monitor
External Connector Type: DB-15 female
Port Type: Video Port

Handle 0x0010, DMI type 126, 9 bytes
Inactive

Handle 0x0011, DMI type 126, 9 bytes
Inactive

Handle 0x0012, DMI type 126, 9 bytes
Inactive

Handle 0x0013, DMI type 126, 9 bytes
Inactive

Handle 0x0014, DMI type 126, 9 bytes
Inactive

Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Available
Internal Connector Type: None
External Reference Designator: Microphone Jack
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port

Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Available
Internal Connector Type: None
External Reference Designator: Headphone Jack
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port

Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Available
Internal Connector Type: None
External Reference Designator: S-Video-Out
External Connector Type: Other
Port Type: Video Port

Handle 0x0018, DMI type 126, 9 bytes
Inactive

Handle 0x0019, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Available
Internal Connector Type: None
External Reference Designator: Modem
External Connector Type: RJ-11
Port Type: Modem Port

Handle 0x001A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Available
Internal Connector Type: None
External Reference Designator: Ethernet
External Connector Type: RJ-45
Port Type: Network Port

Handle 0x001B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Available
Internal Connector Type: None
External Reference Designator: USB 1
External Connector Type: Access Bus (USB)
Port Type: USB

Handle 0x001C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Available
Internal Connector Type: None
External Reference Designator: USB 2
External Connector Type: Access Bus (USB)
Port Type: USB

Handle 0x001D, DMI type 126, 9 bytes
Inactive

Handle 0x001E, DMI type 126, 9 bytes
Inactive

Handle 0x001F, DMI type 126, 9 bytes
Inactive

Handle 0x0020, DMI type 126, 9 bytes
Inactive

Handle 0x0021, DMI type 126, 9 bytes
Inactive

Handle 0x0022, DMI type 9, 13 bytes
System Slot Information
Designation: CardBus Slot 1
Type: 32-bit PC Card (PCMCIA)
Current Usage: Available
Length: Other
ID: Adapter 0, Socket 0
Characteristics:
5.0 V is provided
3.3 V is provided
PC Card-16 is supported
Cardbus is supported
Zoom Video is supported
Modem ring resume is supported
PME signal is supported
Hot-plug devices are supported

Handle 0x0023, DMI type 9, 13 bytes
System Slot Information
Designation: CardBus Slot 2
Type: 32-bit PC Card (PCMCIA)
Current Usage: Available
Length: Other
ID: Adapter 1, Socket 0
Characteristics:
5.0 V is provided
3.3 V is provided
PC Card-16 is supported
Cardbus is supported
Zoom Video is supported
Modem ring resume is supported
PME signal is supported
Hot-plug devices are supported

Handle 0x0024, DMI type 126, 13 bytes
Inactive

Handle 0x0025, DMI type 126, 13 bytes
Inactive

Handle 0x0026, DMI type 9, 13 bytes
System Slot Information
Designation: Mini-PCI Slot 1
Type: 32-bit PCI
Current Usage: Available
Length: Other
ID: 1
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
SMBus signal is supported

Handle 0x0027, DMI type 126, 13 bytes
Inactive

Handle 0x0028, DMI type 10, 6 bytes
On Board Device Information
Type: Other
Status: Enabled
Description: IBM Embedded Security hardware

Handle 0x0029, DMI type 11, 5 bytes
OEM Strings
String 1: IBM ThinkPad Embedded Controller -[1RHT71WW-3.04 ]-

Handle 0x002A, DMI type 13, 22 bytes
BIOS Language Information
Installable Languages: 1
enUS
Currently Installed Language: enUS

Handle 0x002B, DMI type 15, 25 bytes
System Event Log
Area Length: 0 bytes
Header Start Offset: 0x0000
Header Length: 16 bytes
Data Start Offset: 0x0010
Access Method: General-purpose non-volatile data functions
Access Address: 0x0000
Status: Invalid, Not Full
Change Token: 0x00000000
Header Format: Type 1
Supported Log Type Descriptors: 1
Descriptor 1: POST error
Data Format 1: POST results bitmap

Handle 0x002C, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 1 GB
Error Information Handle: Not Provided
Number Of Devices: 2

Handle 0x002D, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x002C
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: SODIMM
Set: None
Locator: DIMM 1
Bank Locator: Bank 0/1
Type: DDR
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified

Handle 0x002E, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x002C
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 256 MB
Form Factor: SODIMM
Set: None
Locator: DIMM 2
Bank Locator: Bank 2/3
Type: DDR
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified

Handle 0x002F, DMI type 18, 23 bytes
32-bit Memory Error Information
Type: OK
Granularity: Unknown
Operation: Unknown
Vendor Syndrome: Unknown
Memory Array Address: Unknown
Device Address: Unknown
Resolution: Unknown

Handle 0x0030, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0002FFFFFFF
Range Size: 768 MB
Physical Array Handle: 0x002C
Partition Width: 0

Handle 0x0031, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0001FFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x002D
Memory Array Mapped Address Handle: 0x0030
Partition Row Position: 1

Handle 0x0032, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00020000000
Ending Address: 0x0002FFFFFFF
Range Size: 256 MB
Physical Device Handle: 0x002E
Memory Array Mapped Address Handle: 0x0030
Partition Row Position: 1

Handle 0x0033, DMI type 21, 7 bytes
Built-in Pointing Device
Type: Track Point
Interface: PS/2
Buttons: 3

Handle 0x0034, DMI type 21, 7 bytes
Built-in Pointing Device
Type: Touch Pad
Interface: PS/2
Buttons: 0

Handle 0x0035, DMI type 24, 5 bytes
Hardware Security
Power-On Password Status: Disabled
Keyboard Password Status: Disabled
Administrator Password Status: Disabled
Front Panel Reset Status: Unknown

Handle 0x0036, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected

Handle 0x0037, DMI type 131, 102 bytes
OEM-specific Type
Header and Data:
83 66 37 00 01 00 00 00 00 01 72 03 40 00 AE 80
00 02 00 00 00 00 00 2A 00 40 2A 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 16 00 80 16 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
Strings:
IBMCFGDATA

Handle 0x0038, DMI type 131, 17 bytes
OEM-specific Type
Header and Data:
83 11 38 00 01 02 03 FF FF 1F 00 00 00 00 00 02
00
Strings:
BOOTINF 20h
BOOTDEV 21h
KEYPTRS 23h

Handle 0x0039, DMI type 132, 7 bytes
OEM-specific Type
Header and Data:
84 07 39 00 01 D8 36

Handle 0x003A, DMI type 133, 5 bytes
OEM-specific Type
Header and Data:
85 05 3A 00 01
Strings:
KHOIHGIUCCHHII

Handle 0x003B, DMI type 134, 13 bytes
OEM-specific Type
Header and Data:
86 0D 3B 00 24 12 05 20 00 00 00 00 00

Handle 0x003C, DMI type 127, 4 bytes
End Of Table