hp nx9020 module betoltes problema

minap vettunk egy epp most olcson kaphato laptopot, nosza raktam is ra a sargeot (aktualis netinstall). a gond az, hogy amikor tolt be a kernel, akkor amint eler a modulbetolteshez, illetve kicsit mar utana, valami gikszer tortenik, elkezd trace-lni, mindnefele <sokszam> <sokszam> dumpot ir ki.

aztan menne tovabb, majd egy random lepesnel (alapbol usb betoltes, rescue modban masutt) leall. sysrq + i-vel tovabbmegy, szoval mar van log, amit a sysresquecd-vel le tudtam menteni (nem akartam nagyon megvagni, a vegen van a dolog):

[code:1:ad3a2a759d]
May 6 23:49:55 (none) syslogd 1.4.1#16: restart.
May 6 23:49:55 (none) kernel: klogd 1.4.1#16, log source = /proc/kmsg started.
May 6 23:49:55 (none) kernel: Inspecting /boot/System.map-2.4.27-2-386
May 6 23:49:55 (none) kernel: Loaded 18322 symbols from /boot/System.map-2.4.27-2-386.
May 6 23:49:55 (none) kernel: Symbols match kernel version 2.4.27.
May 6 23:49:55 (none) kernel: Loaded 623 symbols from 22 modules.
May 6 23:49:55 (none) kernel: Linux version 2.4.27-2-386 (horms@charles.lab.ultramonkey.org) (gcc version 3.3.5 (Debian 1:3.3.5-6)) #1 Thu Jan 20 10:55:08 JST 2005
May 6 23:49:55 (none) kernel: BIOS-provided physical RAM map:
May 6 23:49:55 (none) kernel: BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
May 6 23:49:55 (none) kernel: BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
May 6 23:49:55 (none) kernel: BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
May 6 23:49:55 (none) kernel: BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
May 6 23:49:55 (none) kernel: BIOS-e820: 0000000000100000 - 000000000dee0000 (usable)
May 6 23:49:55 (none) kernel: BIOS-e820: 000000000dee0000 - 000000000deec000 (ACPI data)
May 6 23:49:55 (none) kernel: BIOS-e820: 000000000deec000 - 000000000df00000 (ACPI NVS)
May 6 23:49:55 (none) kernel: BIOS-e820: 000000000df00000 - 0000000010000000 (reserved)
May 6 23:49:55 (none) kernel: BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
May 6 23:49:55 (none) kernel: BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
May 6 23:49:55 (none) kernel: 222MB LOWMEM available.
May 6 23:49:55 (none) kernel: On node 0 totalpages: 57056
May 6 23:49:55 (none) kernel: zone(0): 4096 pages.
May 6 23:49:55 (none) kernel: zone(1): 52960 pages.
May 6 23:49:55 (none) kernel: zone(2): 0 pages.
May 6 23:49:55 (none) kernel: ACPI: RSDP (v000 HP ) @ 0x000f6560
May 6 23:49:55 (none) kernel: ACPI: RSDT (v001 HP 3084 0x06040000 LTP 0x00000000) @ 0x0dee67e7
May 6 23:49:55 (none) kernel: ACPI: FADT (v001 HP 3084 0x06040000 PTL 0x00000050) @ 0x0deebed2
May 6 23:49:55 (none) kernel: ACPI: BOOT (v001 HP 3084 0x06040000 LTP 0x00000001) @ 0x0deebfd8
May 6 23:49:55 (none) kernel: ACPI: DSDT (v001 HP 3084 0x06040000 MSFT 0x0100000e) @ 0x00000000
May 6 23:49:55 (none) kernel: Kernel command line: root=/dev/hda2 ro
May 6 23:49:55 (none) kernel: Local APIC disabled by BIOS -- reenabling.
May 6 23:49:55 (none) kernel: Found and enabled local APIC!
May 6 23:49:55 (none) kernel: Initializing CPU#0
May 6 23:49:55 (none) kernel: Detected 1296.782 MHz processor.
May 6 23:49:55 (none) kernel: Console: colour VGA+ 80x25
May 6 23:49:55 (none) kernel: Calibrating delay loop... 2588.67 BogoMIPS
May 6 23:49:55 (none) kernel: Memory: 219668k/228224k available (1069k kernel code, 8168k reserved, 459k data, 96k init, 0k highmem)
May 6 23:49:55 (none) kernel: Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
May 6 23:49:55 (none) kernel: Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
May 6 23:49:55 (none) kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
May 6 23:49:55 (none) kernel: Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
May 6 23:49:55 (none) kernel: Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
May 6 23:49:55 (none) kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
May 6 23:49:55 (none) kernel: CPU: Intel(R) Celeron(R) M processor 1.30GHz stepping 06
May 6 23:49:55 (none) kernel: Enabling fast FPU save and restore... done.
May 6 23:49:55 (none) kernel: Enabling unmasked SIMD FPU exception support... done.
May 6 23:49:55 (none) kernel: Checking 'hlt' instruction... OK.
May 6 23:49:55 (none) kernel: Checking for popad bug... OK.
May 6 23:49:55 (none) kernel: POSIX conformance testing by UNIFIX
May 6 23:49:55 (none) kernel: enabled ExtINT on CPU#0
May 6 23:49:55 (none) kernel: ESR value before enabling vector: 00000000
May 6 23:49:55 (none) kernel: ESR value after enabling vector: 00000000
May 6 23:49:55 (none) kernel: Using local APIC timer interrupts.
May 6 23:49:55 (none) kernel: calibrating APIC timer ...
May 6 23:49:55 (none) kernel: ..... CPU clock speed is 1296.7827 MHz.
May 6 23:49:55 (none) kernel: ..... host bus clock speed is 99.7524 MHz.
May 6 23:49:55 (none) kernel: cpu: 0, clocks: 997524, slice: 498762
May 6 23:49:55 (none) kernel: CPU0<T0:997520,T1:498752,D:6,S:498762,C:997524>
May 6 23:49:55 (none) kernel: ACPI: Subsystem revision 20040326
May 6 23:49:55 (none) kernel: ACPI: Interpreter disabled.
May 6 23:49:55 (none) kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd9a2, last bus=2
May 6 23:49:55 (none) kernel: PCI: Using configuration type 1
May 6 23:49:55 (none) kernel: PCI: Probing PCI hardware
May 6 23:49:55 (none) kernel: PCI: ACPI tables contain no PCI IRQ routing entries
May 6 23:49:55 (none) kernel: PCI: Probing PCI hardware (bus 00)
May 6 23:49:55 (none) kernel: PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
May 6 23:49:55 (none) kernel: Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge
May 6 23:49:55 (none) kernel: PCI: Using IRQ router PIIX/ICH [8086/24cc] at 00:1f.0
May 6 23:49:55 (none) kernel: Linux NET4.0 for Linux 2.4
May 6 23:49:55 (none) kernel: Based upon Swansea University Computer Society NET3.039
May 6 23:49:55 (none) kernel: Initializing RT netlink socket
May 6 23:49:55 (none) kernel: Starting kswapd
May 6 23:49:55 (none) kernel: VFS: Disk quotas vdquot_6.5.1
May 6 23:49:55 (none) kernel: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
May 6 23:49:55 (none) kernel: devfs: boot_options: 0x0
May 6 23:49:55 (none) kernel: pty: 256 Unix98 ptys configured
May 6 23:49:55 (none) kernel: Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
May 6 23:49:55 (none) kernel: PCI: Found IRQ 5 for device 00:1f.6
May 6 23:49:55 (none) kernel: PCI: Sharing IRQ 5 with 00:1f.3
May 6 23:49:55 (none) kernel: PCI: Sharing IRQ 5 with 00:1f.5
May 6 23:49:55 (none) kernel: COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <info@itc.hu>
May 6 23:49:55 (none) kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
May 6 23:49:55 (none) kernel: Initializing Cryptographic API
May 6 23:49:55 (none) kernel: NET4: Linux TCP/IP 1.0 for NET4.0
May 6 23:49:55 (none) kernel: IP: routing cache hash table of 2048 buckets, 16Kbytes
May 6 23:49:55 (none) kernel: TCP: Hash tables configured (established 16384 bind 32768)
May 6 23:49:55 (none) kernel: Linux IP multicast router 0.06 plus PIM-SM
May 6 23:49:55 (none) kernel: RAMDISK: cramfs filesystem found at block 0
May 6 23:49:55 (none) kernel: RAMDISK: Loading 3788 blocks [1 disk] into ram disk... done.
May 6 23:49:55 (none) kernel: Freeing initrd memory: 3788k freed
May 6 23:49:55 (none) kernel: VFS: Mounted root (cramfs filesystem).
May 6 23:49:55 (none) kernel: Freeing unused kernel memory: 96k freed
May 6 23:49:55 (none) kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
May 6 23:49:55 (none) kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
May 6 23:49:55 (none) kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
May 6 23:49:55 (none) kernel: ICH4: IDE controller at PCI slot 00:1f.1
May 6 23:49:55 (none) kernel: PCI: Enabling device 00:1f.1 (0005 -> 0007)
May 6 23:49:55 (none) kernel: PCI: Assigned IRQ 11 for device 00:1f.1
May 6 23:49:55 (none) kernel: ICH4: chipset revision 3
May 6 23:49:55 (none) kernel: ICH4: not 100%% native mode: will probe irqs later
May 6 23:49:55 (none) kernel: ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio
May 6 23:49:55 (none) kernel: ide1: BM-DMA at 0x1818-0x181f, BIOS settings: hdc:DMA, hdd:pio
May 6 23:49:55 (none) kernel: hda: ST94019A, ATA DISK drive
May 6 23:49:55 (none) kernel: blk: queue ce825b60, I/O limit 4095Mb (mask 0xffffffff)
May 6 23:49:55 (none) kernel: hdc: HL-DT-STCD-RW/DVD DRIVE GCC-4243N, ATAPI CD/DVD-ROM drive
May 6 23:49:55 (none) kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
May 6 23:49:55 (none) kernel: ide1 at 0x170-0x177,0x376 on irq 15
May 6 23:49:55 (none) kernel: hda: attached ide-disk driver.
May 6 23:49:55 (none) kernel: hda: 78140160 sectors (40008 MB) w/2048KiB Cache, CHS=4864/255/63, UDMA(100)
May 6 23:49:55 (none) kernel: Partition check:
May 6 23:49:55 (none) kernel: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 >
May 6 23:49:55 (none) kernel: Journalled Block Device driver loaded
May 6 23:49:55 (none) kernel: kjournald starting. Commit interval 5 seconds
May 6 23:49:55 (none) kernel: EXT3-fs: mounted filesystem with ordered data mode.
May 6 23:49:55 (none) kernel: kjournald starting. Commit interval 5 seconds
May 6 23:49:55 (none) kernel: EXT3-fs: mounted filesystem with ordered data mode.
May 6 23:49:55 (none) kernel: Adding Swap: 666656k swap-space (priority -1)
May 6 23:49:55 (none) kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
May 6 23:49:55 (none) kernel: Real Time Clock Driver v1.10f
May 6 23:49:55 (none) kernel: hdc: attached ide-cdrom driver.
May 6 23:49:55 (none) kernel: hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, DMA
May 6 23:49:55 (none) kernel: Uniform CD-ROM driver Revision: 3.12
May 6 23:49:55 (none) kernel: kjournald starting. Commit interval 5 seconds
May 6 23:49:55 (none) kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
May 6 23:49:55 (none) kernel: EXT3-fs: mounted filesystem with ordered data mode.
May 6 23:49:55 (none) kernel: Linux Kernel Card Services 3.1.22
May 6 23:49:55 (none) kernel: options: [pci] [cardbus] [pm]
May 6 23:49:55 (none) kernel: PCI: Assigned IRQ 11 for device 02:05.0
May 6 23:49:55 (none) kernel: Yenta ISA IRQ mask 0x02d8, PCI irq 11
May 6 23:49:55 (none) kernel: Socket status: 30000006
May 6 23:49:55 (none) kernel: 8139too Fast Ethernet driver 0.9.26
May 6 23:49:55 (none) kernel: PCI: Found IRQ 10 for device 02:00.0
May 6 23:49:55 (none) kernel: PCI: Sharing IRQ 10 with 00:02.0
May 6 23:49:55 (none) kernel: PCI: Sharing IRQ 10 with 00:1d.0
May 6 23:49:55 (none) kernel: eth0: RealTek RTL8139 at 0x3000, 00:c0:9f:79:d0:a4, IRQ 10
May 6 23:49:55 (none) kernel: SCSI subsystem driver Revision: 1.00
May 6 23:49:55 (none) kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices
May 6 23:49:55 (none) kernel: Intel 810 + AC97 Audio, version 1.01, 10:59:53 Jan 20 2005
May 6 23:49:55 (none) kernel: PCI: Found IRQ 5 for device 00:1f.5
May 6 23:49:55 (none) kernel: PCI: Sharing IRQ 5 with 00:1f.3
May 6 23:49:55 (none) kernel: PCI: Sharing IRQ 5 with 00:1f.6
May 6 23:49:55 (none) kernel: i810: Intel ICH4 found at IO 0x18c0 and 0x1c00, MEM 0xe0100c00 and 0xe0100800, IRQ 5
May 6 23:49:55 (none) kernel: i810: Intel ICH4 mmio at 0xce8ffc00 and 0xce901800
May 6 23:49:55 (none) kernel: i810_audio: Primary codec has ID 0
May 6 23:49:55 (none) kernel: i810_audio: Audio Controller supports 6 channels.
May 6 23:49:55 (none) kernel: i810_audio: Defaulting to base 2 channel mode.
May 6 23:49:55 (none) kernel: i810_audio: Resetting connection 0
May 6 23:49:55 (none) kernel: i810_audio: Connection 0 with codec id 0
May 6 23:49:55 (none) kernel: ac97_codec: AC97 Modem codec, id: CXT48 (Unknown)
May 6 23:49:55 (none) kernel: i810_audio: codec 0 is a softmodem - skipping.
May 6 23:49:55 (none) kernel: printing eip:
May 6 23:49:55 (none) kernel: ce8f6174
May 6 23:49:55 (none) kernel: Oops: 0000
May 6 23:49:55 (none) kernel: CPU: 0
May 6 23:49:55 (none) kernel: EIP: 0010:[usb-uhci:__insmod_usb-uhci_O/lib/modules/2.4.27-2-386/kernel/drivers+-110220/96] Not tainted
May 6 23:49:55 (none) kernel: EFLAGS: 00010282
May 6 23:49:55 (none) kernel: eax: cd511c00 ebx: 00000000 ecx: cd511c00 edx: c128c790
May 6 23:49:55 (none) kernel: esi: c128c760 edi: c128c7f8 ebp: c128c760 esp: cda6be58
May 6 23:49:55 (none) kernel: ds: 0018 es: 0018 ss: 0018
May 6 23:49:55 (none) kernel: Process modprobe (pid: 434, stackpage=cda6b000)
May 6 23:49:55 (none) kernel: Stack: cd511c00 c128c760 c128c7f8 ce8fb12c ce8f96d2 c128c760 ffffffff 00000000
May 6 23:49:55 (none) kernel: 00000032 c128c760 c01167b5 c128c760 00000286 00000a04 c128c760 00000000
May 6 23:49:55 (none) kernel: c128c760 ce8f945b c128c760 c128c790 cd511c00 00000001 00000000 00000001
May 6 23:49:55 (none) kernel: Call Trace: [usb-uhci:__insmod_usb-uhci_O/lib/modules/2.4.27-2-386/kernel/drivers+-89812/96] [usb-uhci:__insmod_usb-uhci_O/lib/modules/2.4.27-2-386/kernel/drivers+-96558/96] [printk+247/260] [usb-uhci:__insmod_usb-uhci_O/lib/modules/2.4.27-2-386/kernel/drivers+-97189/96] [usb-uhci:__insmod_usb-uhci_O/lib/modules/2.4.27-2-386/kernel/drivers+-89812/96]
May 6 23:49:55 (none) kernel: [usb-uhci:__insmod_usb-uhci_O/lib/modules/2.4.27-2-386/kernel/drivers+-94907/96] [usb-uhci:__insmod_usb-uhci_O/lib/modules/2.4.27-2-386/kernel/drivers+-89812/96] [usb-uhci:__insmod_usb-uhci_O/lib/modules/2.4.27-2-386/kernel/drivers+-89280/96] [pci_announce_device+48/74] [usb-uhci:__insmod_usb-uhci_O/lib/modules/2.4.27-2-386/kernel/drivers+-89812/96] [usb-uhci:__insmod_usb-uhci_O/lib/modules/2.4.27-2-386/kernel/drivers+-89280/96]
May 6 23:49:55 (none) kernel: [pci_register_driver+63/83] [usb-uhci:__insmod_usb-uhci_O/lib/modules/2.4.27-2-386/kernel/drivers+-89280/96] [usb-uhci:__insmod_usb-uhci_O/lib/modules/2.4.27-2-386/kernel/drivers+-93655/96] [usb-uhci:__insmod_usb-uhci_O/lib/modules/2.4.27-2-386/kernel/drivers+-89280/96] [usb-uhci:__insmod_usb-uhci_O/lib/modules/2.4.27-2-386/kernel/drivers+-90784/96] [sys_init_module+1300/1454]
May 6 23:49:55 (none) kernel: [usb-uhci:__insmod_usb-uhci_O/lib/modules/2.4.27-2-386/kernel/drivers+-90152/96] [usb-uhci:__insmod_usb-uhci_O/lib/modules/2.4.27-2-386/kernel/drivers+-110496/96] [system_call+51/56]
May 6 23:49:55 (none) kernel:
May 6 23:49:55 (none) kernel: Code: 8b 53 24 31 ff 83 7a 08 00 75 0d 66 83 a0 16 02 00 00 fb e9
May 6 23:49:55 (none) kernel: <6>usb.c: registered new driver usbdevfs
May 6 23:49:55 (none) kernel: usb.c: registered new driver hub
May 6 23:49:55 (none) kernel: usb-uhci.c: $Revision: 1.275 $ time 11:00:40 Jan 20 2005
May 6 23:49:55 (none) kernel: usb-uhci.c: High bandwidth mode enabled
/*itt megallt*/
May 6 23:49:55 (none) kernel: SysRq : Kill All Tasks
May 6 23:49:56 (none) kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7
May 6 23:49:56 (none) kernel: cs: IO port probe 0x0800-0x08ff: clean.
May 6 23:49:56 (none) kernel: cs: IO port probe 0x0c00-0x0cff: clean.
May 6 23:49:56 (none) kernel: cs: IO port probe 0x0a00-0x0aff: clean.
May 6 23:49:58 (none) termwrap: info: Switching console charset mapping to ISO-8859-1
May 6 21:50:50 (none) kernel: cdrom: open failed.
May 6 22:01:58 (none) kernel: 8139too Fast Ethernet driver 0.9.26
May 7 00:04:46 (none) syslogd 1.4.1#16: restart. /*itt en inditottam ujra, mert a modprobe 8139too utan csak vart, es vart...*/
[/code:1:ad3a2a759d]

remelem valaki tud segiteni.
egyebkent a sysrescuecd-vel sem tudok bebootolni, csak ha nodetect-el inditom.

b
http://grafit.mchtr.pw.edu.pl/~szczedar/nx9020.html itt talaltam egy klassz kis irast, de ez sajna csak azt ecseteli, hogy milyen jol is mukodik...

ugy vettem eszre, hogy az automatikus modulbetoltesnel akad el a dolog, ha live cd-rol bootol az ember.

ugyhogy en igy csinaltam meg: sysresque cd, nodetect-tel inditottam, utana

modprobe 8139too
mount /dev/<sarge> /dev/temp
chroot /dev/temp /bin/sh
apt-get update
apt-get upgrade

es forditottam ra egy sajat kernelt. ezek utan mar minden ment.

[quote:21cbd4f983="MezoR"]Bocs hogy nem tul szinvonalas a kerdesem, de debianhoz nekem nincs live cdm, de nem is erdekel a dolog. En is azt vettem eszre, hogy az auto betoltesnel akad. A sysresque cd egeszen pontosan melyik? A telepito, csak mas parameterekkel inditva, vagy ez is kulon, mint a live cd.

nem, a system rescue cd egy live cd, pont ilyen karbanarto celokra valo. de van rajta particionalo (grafikus is), meg miegymas, hasznos kis joszag.

viszont szerintem a debian telepitoje is hasznalhato rescue modban, igaz? nekem csak netinstallom van itthon, de ha jol emlekszem a rendes cd-s valtozat az tud ilyet.

probald berakni a cd-t, es bootnal azt mondani, h
boot: rescue gdth=disable:y

remelem van rescue opcio, ha nincs, akkor valahogy probalj elnavigalni odaig, hogy megtudd, hogyan kell az installcd-t rescue-kent hasznalni. a gdth=disable:y opcio megmondja, hogy ne hasznaljon autodetect-et.

ha ez megvan, akkor lasd fent, ezekkel a parancsokkal at chrootolsz a meglevo installra, es frissited azt.

[quote:f43d3cb5d3="Somez"]Hol vettétek, nekem is felkeltette az érdeklődésem? :-)

Elnézést, már megtaláltam hogy Saturn :-)

pedig mar begepeltem a valaszt :) de ezt azert hozzafuzom:

egyebkent jo cucc, az aksija most eloszor volt feltoltve, cdirassal, ket rendszer (na jo, masfel) felhuzasaval birta kb 3.5 orat.

(arahoz kepest...)

kozben aludtam a problemara egyet, es arra gondoltam, hogy meg kene probalni valahogy kernelparameterben megadni, h ne toltogessen be drivereket. de ezt nem tudom hogy mit lehet neki megadni. most a debian.org-ot bongeszgetem, de eddig semmi eredmeny.

teljesitmeny: megdobbenve tapasztaltam, hogy veri az 1.5G-s celeronos desktopomat. csendes, meg minden.

Egyetlen furcsasag: a proci 60 fokon uzemel, ami nyaron olbentartott gepnel eleg rossz. de jo a szellozese, 65 fole sosem megy.

azota megoldotott ez a modulbetoltesi problema, sarge-ot raraktam, es valahogy atchroot-oltam ra, frissitettem mindent, es azota megy.

egy hasznos dolog: cpu stepping beallitasa:
kernelbe beforditani a p4-clocking, cpufreqd-t fel, es inditasnal egy kis script mindig beechozza a "powersave", vagy "preformance" szocskat (grubbol lehet uzemmodot valtani) a /sys/devices/system/cpu/cpu0/valami_governor

b

[quote:4689e4f344="Somez"]Tényleg nem rossz az ára, bár én egy 1.3ghz Pentium-M procitól több rendelkezésre állást vártam :-( Fontolgatom, hogy veszek egy notebookot, de az ára nagyon fontos lenne +wifi +linuxos támogatottság :-) Bár most egyelőre úgy néz ki meghiúsul a vásárlás. Próbáld meg esetleg felvenni a kapcsolatot a cikk szerzőjével, hátha tud megoldást a problémádra. Én mondjuk kipróbálnék egy másik disztrót is, hátha az jobban szereti a gépet.

azert azt vedd figyelembe, hogy ez nem rendelkezesreallas volt, hanem azert ugy igenybe volt veve. jo, persze nem egy gentoot forditottam (nem is birtak volna az icipici kondik)...

jo otlet, akkor irok a sracnak. de meg elotte szerintem tekerek ra egy kernelt. a masik disztron gondolkodtam, sot, meg talan freeBSD-re is ravennem magam, csak ahhoz meg ennyire sem ertek. slackware-t annyira nem szeretem, a tobbi meg tul csicsas. gentoot meg nem szeretnek, ahhoz a proci nem eleg eros szerintem. utalok ket oran keresztul telepiteni egy programot. szoval mast meg nem igazan ismerek. mindegy, nem adom fel.

update:

a srac jofej, de javasolta, hogy dobjam fel a problemat forumra, ilyen melysegben o nem ert hozza. de nagyon segitokesz volt.

tovabbi tapasztalatok: system rescue CD-rol be tudtam bootolni nodetect opcioval, kezzel berantottam a 8139too drivert, chroot /mnt/debi, es onnet mar minden ment. most probalok ra kernelt forditani, hatha a mindent-bele kernellel volt baja.

kozben a laptoprol uj benyomasok: a billentyuzet erezhetoen alacsonykategorias, hasznalhato, de fura. a kepernyon maris van egy pixelhiba, amugy szep kepe van,15"-on 1024x768-ban.

van a touchpad felett gomb, ami arra szolgal, h lezarjuk az egeret, jol jon h az ember x alatt gepel sokat.