dmesg
[ 0.532089] ACPI: Interpreter enabled
[ 0.532092] ACPI: (supports S0 S3 S4 S5)
[ 0.532108] ACPI: Using IOAPIC for interrupt routing
[ 0.540172] ACPI: EC: GPE = 0x14, I/O: command/status = 0x66, data = 0x62
[ 0.540175] ACPI: EC: driver started in interrupt mode
[ 0.540297] ACPI: No dock devices found.
[ 0.540306] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.540397] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.540401] pci 0000:00:05.0: PME# disabled
[ 0.540424] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.540426] pci 0000:00:06.0: PME# disabled
[ 0.540481] pci 0000:00:12.0: reg 10 io port: [0x8438-0x843f]
[ 0.540489] pci 0000:00:12.0: reg 14 io port: [0x8454-0x8457]
[ 0.540497] pci 0000:00:12.0: reg 18 io port: [0x8430-0x8437]
[ 0.540505] pci 0000:00:12.0: reg 1c io port: [0x8450-0x8453]
[ 0.540513] pci 0000:00:12.0: reg 20 io port: [0x8400-0x840f]
[ 0.540522] pci 0000:00:12.0: reg 24 32bit mmio: [0xd0004000-0xd00043ff]
[ 0.540543] pci 0000:00:12.0: set SATA to AHCI mode
[ 0.540576] pci 0000:00:13.0: reg 10 32bit mmio: [0xd0005000-0xd0005fff]
[ 0.540637] pci 0000:00:13.1: reg 10 32bit mmio: [0xd0006000-0xd0006fff]
[ 0.540697] pci 0000:00:13.2: reg 10 32bit mmio: [0xd0007000-0xd0007fff]
[ 0.540758] pci 0000:00:13.3: reg 10 32bit mmio: [0xd0008000-0xd0008fff]
[ 0.540819] pci 0000:00:13.4: reg 10 32bit mmio: [0xd0009000-0xd0009fff]
[ 0.540902] pci 0000:00:13.5: reg 10 32bit mmio: [0xd0004400-0xd00044ff]
[ 0.540947] pci 0000:00:13.5: supports D1 D2
[ 0.540949] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.540954] pci 0000:00:13.5: PME# disabled
[ 0.541004] pci 0000:00:14.0: reg 10 io port: [0x8410-0x841f]
[ 0.541071] pci 0000:00:14.1: reg 10 io port: [0x1f0-0x1f7]
[ 0.541078] pci 0000:00:14.1: reg 14 io port: [0x3f4-0x3f7]
[ 0.541086] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.541094] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.541102] pci 0000:00:14.1: reg 20 io port: [0x8420-0x842f]
[ 0.541160] pci 0000:00:14.2: reg 10 64bit mmio: [0xd0000000-0xd0003fff]
[ 0.541200] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.541204] pci 0000:00:14.2: PME# disabled
[ 0.541386] pci 0000:01:05.0: reg 10 32bit mmio: [0xd4000000-0xd7ffffff]
[ 0.541390] pci 0000:01:05.0: reg 14 io port: [0x9000-0x90ff]
[ 0.541394] pci 0000:01:05.0: reg 18 32bit mmio: [0xd0100000-0xd010ffff]
[ 0.541404] pci 0000:01:05.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.541409] pci 0000:01:05.0: supports D1 D2
[ 0.541424] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
[ 0.541427] pci 0000:00:01.0: bridge 32bit mmio: [0xd0100000-0xd01fffff]
[ 0.541432] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd4000000-0xd7ffffff]
[ 0.541483] pci 0000:00:05.0: bridge io port: [0x00-0xfff]
[ 0.541486] pci 0000:00:05.0: bridge 32bit mmio: [0x000000-0x0fffff]
[ 0.541530] pci 0000:05:00.0: reg 10 32bit mmio: [0xd0200000-0xd0203fff]
[ 0.544021] pci 0000:05:00.0: supports D1 D2
[ 0.544084] pci 0000:00:06.0: bridge 32bit mmio: [0xd0200000-0xd02fffff]
[ 0.544132] pci 0000:08:00.0: reg 10 32bit mmio: [0xd0300000-0xd0301fff]
[ 0.544187] pci 0000:08:00.0: supports D1 D2
[ 0.544189] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.544195] pci 0000:08:00.0: PME# disabled
[ 0.544242] pci 0000:08:01.0: reg 10 32bit mmio: [0xd0302000-0xd03020ff]
[ 0.544297] pci 0000:08:01.0: supports D1 D2
[ 0.544299] pci 0000:08:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.544304] pci 0000:08:01.0: PME# disabled
[ 0.544351] pci 0000:08:01.1: reg 10 32bit mmio: [0xd0302400-0xd03024ff]
[ 0.544406] pci 0000:08:01.1: supports D1 D2
[ 0.544408] pci 0000:08:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.544413] pci 0000:08:01.1: PME# disabled
[ 0.544486] pci 0000:00:14.4: transparent bridge
[ 0.544497] pci 0000:00:14.4: bridge 32bit mmio: [0xd0300000-0xd03fffff]
[ 0.544514] bus 00 -> node 0
[ 0.544520] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.544752] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 0.544899] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 0.545061] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.545200] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.548353] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 0.548507] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 0.548660] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 0.548812] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 0.548964] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 0.549116] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 0.549268] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 0.549420] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 0.549572] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled.
[ 0.549720] ACPI: WMI: Mapper loaded
[ 0.549893] SCSI subsystem initialized
[ 0.549932] libata version 3.00 loaded.
[ 0.549978] usbcore: registered new interface driver usbfs
[ 0.549996] usbcore: registered new interface driver hub
[ 0.550021] usbcore: registered new device driver usb
[ 0.550128] PCI: Using ACPI for IRQ routing
[ 0.550134] pci 0000:00:05.0: BAR 7: can't allocate resource
[ 0.550136] pci 0000:00:05.0: BAR 8: can't allocate resource
[ 0.550252] Bluetooth: Core ver 2.13
[ 0.550252] NET: Registered protocol family 31
[ 0.550252] Bluetooth: HCI device and connection manager initialized
[ 0.550252] Bluetooth: HCI socket layer initialized
[ 0.550252] NET: Registered protocol family 8
[ 0.550252] NET: Registered protocol family 20
[ 0.550252] NetLabel: Initializing
[ 0.550252] NetLabel: domain hash size = 128
[ 0.550252] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.550252] NetLabel: unlabeled traffic allowed by default
[ 0.550252] AppArmor: AppArmor Filesystem Enabled
[ 0.550252] pnp: PnP ACPI init
[ 0.550252] ACPI: bus type pnp registered
[ 0.553157] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:01:05.0 BAR 6 (0x0-0x1ffff), disabling
[ 0.555084] pnp: PnP ACPI: found 10 devices
[ 0.555086] ACPI: ACPI bus type pnp unregistered
[ 0.555090] PnPBIOS: Disabled by ACPI PNP
[ 0.555100] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.555103] system 00:01: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.555107] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.555114] system 00:08: ioport range 0x1080-0x1080 has been reserved
[ 0.555118] system 00:08: ioport range 0x220-0x22f has been reserved
[ 0.555121] system 00:08: ioport range 0x40b-0x40b has been reserved
[ 0.555123] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.555126] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
[ 0.555129] system 00:08: ioport range 0x530-0x537 has been reserved
[ 0.555132] system 00:08: ioport range 0xc00-0xc01 has been reserved
[ 0.555135] system 00:08: ioport range 0xc14-0xc14 has been reserved
[ 0.555138] system 00:08: ioport range 0xc50-0xc52 has been reserved
[ 0.555141] system 00:08: ioport range 0xc6c-0xc6c has been reserved
[ 0.555144] system 00:08: ioport range 0xc6f-0xc6f has been reserved
[ 0.555146] system 00:08: ioport range 0xcd0-0xcd3 has been reserved
[ 0.555149] system 00:08: ioport range 0xcd4-0xcd5 has been reserved
[ 0.555152] system 00:08: ioport range 0xcd6-0xcd7 has been reserved
[ 0.555155] system 00:08: ioport range 0xcd8-0xcdf has been reserved
[ 0.555158] system 00:08: ioport range 0x8000-0x805f has been reserved
[ 0.555161] system 00:08: ioport range 0xf40-0xf47 has been reserved
[ 0.555164] system 00:08: ioport range 0x87f-0x87f has been reserved
[ 0.555170] system 00:09: iomem range 0xe0000-0xfffff could not be reserved
[ 0.555173] system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.555177] system 00:09: iomem range 0xc0004800-0xc0004bff has been reserved
[ 0.555180] system 00:09: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.589878] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.589881] pci 0000:00:01.0: IO window: 0x9000-0x9fff
[ 0.589885] pci 0000:00:01.0: MEM window: 0xd0100000-0xd01fffff
[ 0.589889] pci 0000:00:01.0: PREFETCH window: 0x000000d4000000-0x000000d7ffffff
[ 0.589893] pci 0000:00:05.0: PCI bridge, secondary bus 0000:02
[ 0.589895] pci 0000:00:05.0: IO window: disabled
[ 0.589898] pci 0000:00:05.0: MEM window: disabled
[ 0.589901] pci 0000:00:05.0: PREFETCH window: disabled
[ 0.589905] pci 0000:00:06.0: PCI bridge, secondary bus 0000:05
[ 0.589907] pci 0000:00:06.0: IO window: disabled
[ 0.589910] pci 0000:00:06.0: MEM window: 0xd0200000-0xd02fffff
[ 0.589913] pci 0000:00:06.0: PREFETCH window: disabled
[ 0.589917] pci 0000:00:14.4: PCI bridge, secondary bus 0000:08
[ 0.589919] pci 0000:00:14.4: IO window: disabled
[ 0.589925] pci 0000:00:14.4: MEM window: 0xd0300000-0xd03fffff
[ 0.589930] pci 0000:00:14.4: PREFETCH window: disabled
[ 0.589946] pci 0000:00:05.0: setting latency timer to 64
[ 0.589951] pci 0000:00:06.0: setting latency timer to 64
[ 0.589960] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.589962] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.589965] bus: 01 index 0 io port: [0x9000-0x9fff]
[ 0.589967] bus: 01 index 1 mmio: [0xd0100000-0xd01fffff]
[ 0.589969] bus: 01 index 2 mmio: [0xd4000000-0xd7ffffff]
[ 0.589971] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.589974] bus: 02 index 0 mmio: [0x0-0xfff]
[ 0.589976] bus: 02 index 1 mmio: [0x0-0xfffff]
[ 0.589978] bus: 02 index 2 mmio: [0x0-0x0]
[ 0.589979] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.589982] bus: 05 index 0 mmio: [0x0-0x0]
[ 0.589984] bus: 05 index 1 mmio: [0xd0200000-0xd02fffff]
[ 0.589986] bus: 05 index 2 mmio: [0x0-0x0]
[ 0.589988] bus: 05 index 3 mmio: [0x0-0x0]
[ 0.589990] bus: 08 index 0 mmio: [0x0-0x0]
[ 0.589992] bus: 08 index 1 mmio: [0xd0300000-0xd03fffff]
[ 0.589994] bus: 08 index 2 mmio: [0x0-0x0]
[ 0.589996] bus: 08 index 3 io port: [0x00-0xffff]
[ 0.589998] bus: 08 index 4 mmio: [0x000000-0xffffffff]
[ 0.590008] NET: Registered protocol family 2
[ 0.590118] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.590358] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.590456] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.590552] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.590555] TCP reno registered
[ 0.590616] NET: Registered protocol family 1
[ 0.590753] checking if image is initramfs... it is
[ 1.092081] Switched to high resolution mode on CPU 0
[ 1.251802] Freeing initrd memory: 7601k freed
[ 1.251915] cpufreq: No nForce2 chipset.
[ 1.252058] audit: initializing netlink socket (disabled)
[ 1.252075] type=2000 audit(1250191949.252:1): initialized
[ 1.260620] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.261850] VFS: Disk quotas dquot_6.5.1
[ 1.261904] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.262487] fuse init (API version 7.10)
[ 1.262561] msgmni has been set to 864
[ 1.262734] alg: No test for stdrng (krng)
[ 1.262745] io scheduler noop registered
[ 1.262747] io scheduler anticipatory registered
[ 1.262749] io scheduler deadline registered
[ 1.262765] io scheduler cfq registered (default)
[ 1.262776] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 1.262870] pci 0000:01:05.0: Boot video device
[ 1.262955] pcieport-driver 0000:00:05.0: setting latency timer to 64
[ 1.262977] pcieport-driver 0000:00:05.0: found MSI capability
[ 1.262981] pci_express 0000:00:05.0:pcie00: allocate port service
[ 1.262994] pci_express 0000:00:05.0:pcie02: allocate port service
[ 1.263029] pcieport-driver 0000:00:06.0: setting latency timer to 64
[ 1.263049] pcieport-driver 0000:00:06.0: found MSI capability
[ 1.263053] pci_express 0000:00:06.0:pcie00: allocate port service
[ 1.263065] pci_express 0000:00:06.0:pcie02: allocate port service
[ 1.263115] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.263217] ACPI Error (exresop-0103): Needed type [Reference], found [Device] db062f90 [20080926]
[ 1.263224] ACPI Exception (dswexec-0445): AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] [20080926]
[ 1.263230] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node db018dc8), AE_AML_OPERAND_TYPE
[ 1.263351] ACPI Error (exresop-0103): Needed type [Reference], found [Device] db062f90 [20080926]
[ 1.263356] ACPI Exception (dswexec-0445): AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] [20080926]
[ 1.263361] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node db018dc8), AE_AML_OPERAND_TYPE
[ 1.263418] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.264460] ACPI: AC Adapter [ACAD] (on-line)
[ 1.660154] ACPI: Battery Slot [BAT1] (battery present)
[ 1.660221] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.660224] ACPI: Power Button (FF) [PWRF]
[ 1.660267] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.660269] ACPI: Power Button (CM) [PWRB]
[ 1.660316] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.660324] ACPI: Sleep Button (CM) [SLPB]
[ 1.660369] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 1.661302] ACPI: Lid Switch [LID]
[ 1.661472] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.661495] processor ACPI_CPU:00: registered as cooling_device0
[ 1.661499] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.667830] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.670437] ACPI: Thermal Zone [THRM] (52 C)
[ 1.670476] isapnp: Scanning for PnP cards...
[ 2.024373] isapnp: No Plug & Play device found
[ 2.025586] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.026513] brd: module loaded
[ 2.026811] loop: module loaded
[ 2.026876] Fixed MDIO Bus: probed
[ 2.026882] PPP generic driver version 2.4.2
[ 2.026944] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 2.026970] Driver 'sd' needs updating - please use bus_type methods
[ 2.026979] Driver 'sr' needs updating - please use bus_type methods
[ 2.027011] ahci 0000:00:12.0: version 3.0
[ 2.027030] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.027068] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 2.027174] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 2.027177] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part
[ 2.027783] scsi0 : ahci
[ 2.027902] scsi1 : ahci
[ 2.027956] scsi2 : ahci
[ 2.028021] scsi3 : ahci
[ 2.028111] ata1: SATA max UDMA/133 abar m1024@0xd0004000 port 0xd0004100 irq 22
[ 2.028116] ata2: SATA max UDMA/133 abar m1024@0xd0004000 port 0xd0004180 irq 22
[ 2.028139] ata3: SATA max UDMA/133 abar m1024@0xd0004000 port 0xd0004200 irq 22
[ 2.028143] ata4: SATA max UDMA/133 abar m1024@0xd0004000 port 0xd0004280 irq 22
[ 2.512017] ata1: softreset failed (device not ready)
[ 2.512056] ata1: failed due to HW bug, retry pmp=0
[ 2.676025] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.676577] ata1.00: ATA-8: FUJITSU MHW2080BH, 0085001C, max UDMA/100
[ 2.676580] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.676601] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.677222] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.677226] ata1.00: configured for UDMA/100
[ 3.012025] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.348026] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.684025] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.700120] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2080B 0085 PQ: 0 ANSI: 5
[ 3.700216] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[ 3.700233] sd 0:0:0:0: [sda] Write Protect is off
[ 3.700236] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.700261] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.700331] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[ 3.700344] sd 0:0:0:0: [sda] Write Protect is off
[ 3.700347] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.700369] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.700373] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 3.791811] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.791866] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.792142] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.792184] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 3.792271] scsi4 : pata_atiixp
[ 3.792322] scsi5 : pata_atiixp
[ 3.793086] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14
[ 3.793089] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15
[ 3.980517] ata5.00: ATAPI: PBDS DVD+/-RW DS-8W1P, BD1B, max UDMA/33
[ 4.020470] ata5.00: configured for UDMA/33
[ 4.178236] scsi 4:0:0:0: CD-ROM PBDS DVD+-RW DS-8W1P BD1B PQ: 0 ANSI: 5
[ 4.189441] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 4.189445] Uniform CD-ROM driver Revision: 3.20
[ 4.189556] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 4.189602] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 4.190017] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.190040] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 4.190065] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 4.190129] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 4.190156] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 4.190177] ehci_hcd 0000:00:13.5: debug port 1
[ 4.190199] ehci_hcd 0000:00:13.5: irq 19, io mem 0xd0004400
[ 4.200012] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 4.200092] usb usb1: configuration #1 chosen from 1 choice
[ 4.200122] hub 1-0:1.0: USB hub found
[ 4.200131] hub 1-0:1.0: 10 ports detected
[ 4.200247] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.200260] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.200272] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 4.200308] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 4.200330] ohci_hcd 0000:00:13.0: irq 16, io mem 0xd0005000
[ 4.256085] usb usb2: configuration #1 chosen from 1 choice
[ 4.256107] hub 2-0:1.0: USB hub found
[ 4.256118] hub 2-0:1.0: 2 ports detected
[ 4.256200] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.256211] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 4.256248] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 4.256269] ohci_hcd 0000:00:13.1: irq 17, io mem 0xd0006000
[ 4.312077] usb usb3: configuration #1 chosen from 1 choice
[ 4.312100] hub 3-0:1.0: USB hub found
[ 4.312110] hub 3-0:1.0: 2 ports detected
[ 4.312190] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.312201] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 4.312240] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 4.312260] ohci_hcd 0000:00:13.2: irq 18, io mem 0xd0007000
[ 4.368095] usb usb4: configuration #1 chosen from 1 choice
[ 4.368118] hub 4-0:1.0: USB hub found
[ 4.368128] hub 4-0:1.0: 2 ports detected
[ 4.368204] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.368215] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 4.368267] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 4.368281] ohci_hcd 0000:00:13.3: irq 17, io mem 0xd0008000
[ 4.424077] usb usb5: configuration #1 chosen from 1 choice
[ 4.424100] hub 5-0:1.0: USB hub found
[ 4.424110] hub 5-0:1.0: 2 ports detected
[ 4.424191] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.424202] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 4.424259] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 4.424273] ohci_hcd 0000:00:13.4: irq 18, io mem 0xd0009000
[ 4.480078] usb usb6: configuration #1 chosen from 1 choice
[ 4.480102] hub 6-0:1.0: USB hub found
[ 4.480112] hub 6-0:1.0: 2 ports detected
[ 4.480198] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.480281] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 4.482783] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.482788] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.482896] mice: PS/2 mouse device common for all mice
[ 4.483072] rtc_cmos 00:04: RTC can wake from S4
[ 4.483111] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 4.483136] rtc0: alarms up to one month, 114 bytes nvram
[ 4.483194] device-mapper: uevent: version 1.0.3
[ 4.483302] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 4.483347] device-mapper: multipath: version 1.0.5 loaded
[ 4.483350] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 4.483424] EISA: Probing bus 0 at eisa.0
[ 4.483432] Cannot allocate resource for EISA slot 1
[ 4.483458] Cannot allocate resource for EISA slot 8
[ 4.483460] EISA: Detected 0 cards.
[ 4.483522] cpuidle: using governor ladder
[ 4.483575] cpuidle: using governor menu
[ 4.484088] TCP cubic registered
[ 4.484190] NET: Registered protocol family 10
[ 4.484589] lo: Disabled Privacy Extensions
[ 4.484904] NET: Registered protocol family 17
[ 4.484920] Bluetooth: L2CAP ver 2.11
[ 4.484922] Bluetooth: L2CAP socket layer initialized
[ 4.484928] Bluetooth: SCO (Voice Link) ver 0.6
[ 4.484929] Bluetooth: SCO socket layer initialized
[ 4.484954] Bluetooth: RFCOMM socket layer initialized
[ 4.484962] Bluetooth: RFCOMM TTY layer initialized
[ 4.484964] Bluetooth: RFCOMM ver 1.10
[ 4.484986] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3500+ processors (1 cpu cores) (version 2.20.00)
[ 4.485029] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0xe
[ 4.485031] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x10
[ 4.485034] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x18
[ 4.485072] Using IPI No-Shortcut mode
[ 4.485150] registered taskstats version 1
[ 4.485279] Magic number: 5:482:546
[ 4.485333] mem null: hash matches
[ 4.485353] processor ACPI_CPU:01: hash matches
[ 4.485385] rtc_cmos 00:04: setting system clock to 2009-08-13 19:32:33 UTC (1250191953)
[ 4.485388] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.485390] EDD information not available.
[ 4.485791] Freeing unused kernel memory: 532k freed
[ 4.485930] Write protecting the kernel text: 4116k
[ 4.485977] Write protecting the kernel read-only data: 1524k
[ 4.512033] usb 1-5: new high speed USB device using ehci_hcd and address 2
[ 4.528407] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 4.565818] compcache: Compressed swap size set to: 110808 KB
[ 4.566052] TLSF: pool: dc775000, init_size=16384, max_size=0, grow_size=16384
[ 4.672070] usb 1-5: configuration #1 chosen from 1 choice
[ 5.824349] Initializing USB Mass Storage driver...
[ 5.825498] usb-storage: device ignored
[ 5.825548] usbcore: registered new interface driver usb-storage
[ 5.825552] USB Mass Storage support registered.
[ 6.357647] Adding 110804k swap on /dev/ramzswap0. Priority:100 extents:1 across:110804k
[ 6.462830] Marking TSC unstable due to TSC halts in idle
[ 6.537210] PM: Starting manual resume from disk
[ 6.537214] PM: Resume from partition 8:6
[ 6.537216] PM: Checking hibernation image.
[ 6.537442] PM: Resume from disk failed.
[ 6.572419] kjournald starting. Commit interval 5 seconds
[ 6.572430] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.165867] udev: starting version 141
[ 13.375752] acpi device:1e: registered as cooling_device1
[ 13.375942] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1b/device:1c/input/input6
[ 13.377778] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 13.703779] ieee80211_crypt: registered algorithm 'NULL'
[ 14.100489] wl: module license 'MIXED/Proprietary' taints kernel.
[ 14.103064] wl 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 14.103072] wl 0000:05:00.0: setting latency timer to 64
[ 14.250589] Linux agpgart interface v0.103
[ 14.528926] sdhci: Secure Digital Host Controller Interface driver
[ 14.528930] sdhci: Copyright(c) Pierre Ossman
[ 14.551262] sdhci-pci 0000:08:01.0: SDHCI controller found [1180:0822] (rev 19)
[ 14.551288] sdhci-pci 0000:08:01.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 14.554418] mmc0: SDHCI controller on PCI [0000:08:01.0] using PIO
[ 14.593482] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 14.593486] ricoh-mmc: Copyright(c) Philip Langdale
[ 14.593523] ricoh-mmc: Ricoh MMC controller found at 0000:08:01.1 [1180:0843] (rev 1)
[ 14.593530] ricoh-mmc: Main Ricoh function not found. Cannot disable controller.
[ 14.863964] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 14.872218] ieee80211_crypt: registered algorithm 'TKIP'
[ 14.872541] eth0: Broadcom BCM4311 802.11 Wireless Controller 5.10.91.9
[ 14.872641] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.872664] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410, revision 0
[ 14.964354] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 15.041348] b44 0000:08:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 15.100177] ssb: Sonics Silicon Backplane found on PCI device 0000:08:00.0
[ 15.100248] b44.c:v2.0
[ 15.120909] eth1: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:1c:23:89:bd:6a
[ 15.126846] udev: renamed network interface eth1 to eth0
[ 15.173617] udev: renamed network interface eth0_rename to eth1
[ 15.193188] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 15.441025] lp: driver loaded but no devices found
[ 15.512799] Adding 497972k swap on /dev/sda6. Priority:-1 extents:1 across:497972k
[ 15.834810] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x180b1, caps: 0xa04713/0x200000
[ 15.869653] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 16.049914] EXT3 FS on sda8, internal journal
[ 17.121962] type=1505 audit(1250184766.134:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2006
[ 17.183426] type=1505 audit(1250184766.194:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2010
[ 17.183585] type=1505 audit(1250184766.194:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2010
[ 17.183643] type=1505 audit(1250184766.194:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2010
[ 17.183695] type=1505 audit(1250184766.194:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2010
[ 17.358265] type=1505 audit(1250184766.370:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2015
[ 17.358497] type=1505 audit(1250184766.370:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2015
[ 17.394683] type=1505 audit(1250184766.406:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2019
[ 20.026059] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.026062] Bluetooth: BNEP filters: protocol multicast
[ 20.045202] Bridge firewalling registered
[ 22.200528] pci 0000:01:05.0: power state changed by ACPI to D0
[ 22.200541] pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 22.707661] [drm] Initialized drm 1.1.0 20060810
[ 22.751958] ppdev: user-space parallel port driver
[ 22.805413] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 23.506125] [drm] Setting GART location based on new memory map
[ 23.506719] [drm] Loading R300 Microcode
[ 23.506739] [drm] Num pipes: 4
[ 23.506745] [drm] writeback test succeeded in 1 usecs
[ 25.989051] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 29.720026] eth1: no IPv6 routers present
[ 84.088027] Clocksource tsc unstable (delta = -73229337 ns)
lsusb
Bus 001 Device 002: ID 19d2:2000
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Ezeket írja ki. Nem csinálok semmivel ttyUSBx-t, egyszerűen ha win alatt betölti az eszközt, akkor utána van. Hogy mitől nem tudom. Ha ubit indítok akkor pedig nincs. Kezdő vagyok linuxban, csak próbálkozom és feltett szándékom, hogy életre lehelem valahogy ezt a modemet, hogy menjen linux alatt, ne kelljen a win segítség.
modeswitch-et még nem tettem fel eddig.