boot.msg ide vonatkozó sorai:
<7>pata_sil680 0000:00:09.0: version 0.4.6
<6>sil680: 133MHz clock.
<4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
<7>PCI: setting IRQ 11 as level-triggered
<6>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
<6>scsi0 : pata_sil680
<6>scsi1 : pata_sil680
<6>ata1: PATA max UDMA/133 cmd 0x0001e800 ctl 0x0001e402 bmdma 0x0001d800 irq 11
<6>ata2: PATA max UDMA/133 cmd 0x0001e000 ctl 0x0001dc02 bmdma 0x0001d808 irq 11
<6>ata1.00: ATA-7: SAMSUNG SP1614N, TM100-30, max UDMA/100
<6>ata1.00: 312581808 sectors, multi 16: LBA48
<6>ata1.00: configured for UDMA/100
<6>ata2.00: ATA-7: SAMSUNG SP1654N, BV100-50, max UDMA/100
<6>ata2.00: 312581808 sectors, multi 16: LBA48
<6>ata2.00: configured for UDMA/100
<5>scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP1614N TM10 PQ: 0 ANSI: 5
<5>scsi 1:0:0:0: Direct-Access ATA SAMSUNG SP1654N BV10 PQ: 0 ANSI: 5
<7>pata_via 0000:00:11.1: version 0.3.1
<4>ACPI: Unable to derive IRQ for device 0000:00:11.1
<4>ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
<6>scsi2 : pata_via
<6>scsi3 : pata_via
<6>ata3: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001fc00 irq 14
<6>ata4: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001fc08 irq 15
<6>ata3.00: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A103, max UDMA/33
<6>ata3.00: configured for UDMA/33
<6>ata4.00: ATAPI: HL-DT-STDVD-ROM GDR8161B, 0100, max UDMA/33
<6>ata4.00: configured for UDMA/33
<5>scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4163B A103 PQ: 0 ANSI: 5
<5>scsi 3:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8161B 0100 PQ: 0 ANSI: 5
<6>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
<6>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
<5>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6> sda: sda1 sda2 < > sda3 sda4
<4> sda: p3 exceeds device capacity
<4> sda: p4 exceeds device capacity
<5>sd 0:0:0:0: [sda] Attached SCSI disk
<5>sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
<5>sd 1:0:0:0: [sdb] Write Protect is off
<7>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
<5>sd 1:0:0:0: [sdb] Write Protect is off
<7>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Ezután még betölt néhány usb drivert, megtalálja többek között a kártyaolvasót is, és utána kezdődik a nyitó hsz-ban írt hibaüzi oldalakon keresztül. :(
OpenSuSE 10.3, Celeron 2,4Ghz, 768MB, 2*160GB IDE Raid0, FX5200, SBLive! E400
OpenSuSE 10.2, Acer Aspire 5020, AMD Turion 64bit @ 1,8Ghz, 1GB, 80GB Toshiba, Mobility Radeon X700 PCI-E 128MB/128bit