Sziasztok!
Köszönöm a segítségeteket, sajnos még nem tökéletes.
Vezetékes része tökéletesen működik (legalábbis úgy tűnik), megkapom a IP címeket, az adott VLAN-hot tartozó tartományt tudom pinggelni.
Beállítom a CAPsMAN-t, az viszont nem működik, de ha letiltom a bridge-et akkor a CAP interfészek azonnal elkészülnek, megjelennek a beállított SSID-k.
Nem értem hol bénázom el..
# jul/25/2019 01:23:00 by RouterOS 6.43.2
# software id = I2JH-J0TN
#
# model = RouterBOARD 941-2nD
# serial number = 7C2C070E797C
/interface bridge
add fast-forward=no name=bridge1 protocol-mode=none vlan-filtering=yes
/interface wireless
set [ find default-name=wlan1 ] ssid=MikroTik
/interface vlan
add interface=bridge1 name=vlan10 vlan-id=10
add interface=bridge1 name=vlan20 vlan-id=20
add interface=bridge1 name=vlan30 vlan-id=30
/caps-man datapath
add bridge=bridge1 client-to-client-forwarding=no local-forwarding=yes name=\
datapath10 vlan-id=10 vlan-mode=use-tag
add bridge=bridge1 client-to-client-forwarding=yes local-forwarding=yes name=\
datapath20 vlan-id=20 vlan-mode=use-tag
add bridge=bridge1 client-to-client-forwarding=yes local-forwarding=yes name=\
datapath30 vlan-id=30 vlan-mode=use-tag
/caps-man security
add authentication-types=wpa-psk,wpa2-psk name=security1 passphrase=jelszo01
/caps-man configuration
add country=hungary datapath=datapath10 name=cfg-LAN security=security1 ssid=\
LAN
add country=hungary datapath=datapath20 name=cfg1-GUEST security=security1 \
ssid=GUEST
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip pool
add name=pool10 ranges=192.168.10.10-192.168.10.20
add name=pool-20 ranges=192.168.20.10-192.168.20.20
add name=pool30 ranges=192.168.30.10-192.168.30.20
add name=pool1 ranges=192.168.1.10-192.168.1.20
/ip dhcp-server
add address-pool=pool10 disabled=no interface=vlan10 name=server1
add address-pool=pool-20 disabled=no interface=vlan20 name=server2
add address-pool=pool30 disabled=no interface=vlan30 name=server3
add address-pool=pool1 disabled=no interface=bridge1 name=server4
/caps-man manager
set enabled=yes
/caps-man manager interface
set [ find default=yes ] forbid=yes
add disabled=no interface=ether4
add disabled=no interface=ether3
/caps-man provisioning
add action=create-dynamic-enabled master-configuration=cfg-LAN \
slave-configurations=cfg1-GUEST
/interface bridge port
add bridge=bridge1 interface=ether4
add bridge=bridge1 interface=ether3
add bridge=bridge1 interface=ether2
/interface bridge vlan
add bridge=bridge1 tagged=ether4,ether3,bridge1 untagged=ether2 vlan-ids=10
add bridge=bridge1 tagged=ether4,bridge1,ether3 untagged=ether2 vlan-ids=20
add bridge=bridge1 tagged=ether4,bridge1,ether3 untagged=ether2 vlan-ids=30
/ip address
add address=192.168.30.2/24 interface=vlan30 network=192.168.30.0
add address=192.168.20.2/24 interface=vlan20 network=192.168.20.0
add address=192.168.10.2/24 interface=vlan10 network=192.168.10.0
add address=192.168.1.1/24 interface=bridge1 network=192.168.1.0
/ip dhcp-client
add dhcp-options=hostname,clientid disabled=no interface=ether1
/ip dhcp-server network
add address=192.168.1.0/24 dns-server=8.8.8.8,8.8.4.4 gateway=192.168.1.1
add address=192.168.10.0/24 dns-server=8.8.8.8,8.8.4.4 gateway=192.168.10.1
add address=192.168.20.0/24 dns-server=8.8.8.8,8.8.4.4 gateway=192.168.20.1
add address=192.168.30.0/24 dns-server=8.8.8.8,8.8.4.4 gateway=192.168.30.1
/ip dns
set servers=8.8.8.8,8.8.4.4
/ip firewall nat
add action=masquerade chain=srcnat