CPU:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Xeon(R) CPU 3050 @ 2.13GHz
stepping : 2
cpu MHz : 2128.055
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc
arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 4259.50
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Xeon(R) CPU 3050 @ 2.13GHz
stepping : 2
cpu MHz : 2128.055
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc
arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 4256.13
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:--
dmesg:
[ 0.000000] Linux version 2.6.24-16-generic (buildd@yellow) (gcc version 4.2.3
(Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 12:47:45 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
[ 0.000000] Command line: root=UUID=d2b9f840-4134-44eb-ba89-5399f05f6a18 ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
[ 0.000000] BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
[ 0.000000] BIOS-e820: 000000003fee0000 - 000000003feed000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003feed000 - 000000003ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 261856) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F7590 checksum 0
[ 0.000000] ACPI: RSDP 000F7590, 0024 (r2 PTLTD )
[ 0.000000] ACPI: XSDT 3FEE8988, 004C (r1 PTLTD XSDT 6040001 LTP 0)
[ 0.000000] ACPI: FACP 3FEE8A48, 00F4 (r3 FSC 6040001 F4240)
[ 0.000000] ACPI: DSDT 3FEE8B3C, 439E (r1 FSC D2399 6040001 MSFT 3000000)
[ 0.000000] ACPI: FACS 3FEEDFC0, 0040
[ 0.000000] ACPI: SPCR 3FEECEDA, 0050 (r1 PTLTD $UCRTBL$ 6040001 PTL 1)
[ 0.000000] ACPI: MCFG 3FEECF2A, 0040 (r1 PTLTD MCFG 6040001 LTP 0)
[ 0.000000] ACPI: APIC 3FEECF6A, 006E (r1 FSC APIC 6040001 CSF 0)
[ 0.000000] ACPI: BOOT 3FEECFD8, 0028 (r1 PTLTD $SBFTBL$ 6040001 LTP 1)
[ 0.000000] ACPI: DMI detected: Fujitsu Siemens
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000003fee0000
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 261856) 1 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-000000003fee0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 157
[ 0.000000] 0: 256 -> 261856
[ 0.000000] On node 0 totalpages: 261757
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1208 pages reserved
[ 0.000000] DMA zone: 2733 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3524 pages used for memmap
[ 0.000000] DMA32 zone: 254236 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0xf008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 3, address 0xfecc0000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 000000000009d000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ce000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000ce000 - 00000000000d0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000d0000 - 00000000000e4000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 256969
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=UUID=d2b9f840-4134-44eb-ba89-5399f05f6a18 ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC calibrated against PM_TIMER
[ 48.800811] time.c: Detected 2128.055 MHz processor.
[ 48.802743] Console: colour VGA+ 80x25
[ 48.802747] console [tty0] enabled
[ 48.802763] Checking aperture...
[ 48.802772] Calgary: detecting Calgary via BIOS EBDA area
[ 48.802773] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 48.814380] Memory: 1019492k/1047424k available (2466k kernel code, 27536k reserved,
1309k data, 316k init)
[ 48.814416] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 48.890771] Calibrating delay using timer specific routine.. 4259.50 BogoMIPS (lpj=8519003)
[ 48.890805] Security Framework initialized
[ 48.890812] SELinux: Disabled at boot.
[ 48.890824] AppArmor: AppArmor initialized
[ 48.890827] Failure registering capabilities with primary security module.
[ 48.890938] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 48.891621] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 48.891938] Mount-cache hash table entries: 256
[ 48.892065] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 48.892067] CPU: L2 cache: 2048K
[ 48.892070] CPU 0/0 -> Node 0
[ 48.892071] using mwait in idle threads.
[ 48.892072] CPU: Physical Processor ID: 0
[ 48.892074] CPU: Processor Core ID: 0
[ 48.892080] CPU0: Thermal monitoring enabled (TM2)
[ 48.892094] SMP alternatives: switching to UP code
[ 48.892793] Early unpacking initramfs... done
[ 49.237219] ACPI: Core revision 20070126
[ 49.237254] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 49.282978] Using local APIC timer interrupts.
[ 49.329955] APIC timer calibration result 16625429
[ 49.329957] Detected 16.625 MHz APIC timer.
[ 49.330033] SMP alternatives: switching to SMP code
[ 49.330640] Booting processor 1/2 APIC 0x1
[ 49.340852] Initializing CPU#1
[ 49.417931] Calibrating delay using timer specific routine.. 4256.13 BogoMIPS (lpj=8512270)
[ 49.417937] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 49.417938] CPU: L2 cache: 2048K
[ 49.417940] CPU 1/1 -> Node 0
[ 49.417941] CPU: Physical Processor ID: 0
[ 49.417942] CPU: Processor Core ID: 1
[ 49.417948] CPU1: Thermal monitoring enabled (TM2)
[ 49.418228] Intel(R) Xeon(R) CPU 3050 @ 2.13GHz stepping 02
[ 49.418237] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 49.438258] Brought up 2 CPUs
[ 49.438326] CPU0 attaching sched-domain:
[ 49.438328] domain 0: span 03
[ 49.438329] groups: 01 02
[ 49.438332] domain 1: span 03
[ 49.438333] groups: 03
[ 49.438335] CPU1 attaching sched-domain:
[ 49.438336] domain 0: span 03
[ 49.438337] groups: 02 01
[ 49.438339] domain 1: span 03
[ 49.438340] groups: 03
[ 49.438538] net_namespace: 120 bytes
[ 49.438872] Time: 9:06:12 Date: 07/02/08
[ 49.438895] NET: Registered protocol family 16
[ 49.439057] ACPI: bus type pci registered
[ 49.439121] PCI: Using configuration type 1
[ 49.440045] ACPI: EC: Look up EC in DSDT
[ 49.442086] ACPI: Interpreter enabled
[ 49.442089] ACPI: (supports S0 S1 S4 S5)
[ 49.442099] ACPI: Using IOAPIC for interrupt routing
[ 49.444426] ACPI: Device [FDC] status [00000008]: functional but not present; setting present
[ 49.444702] ACPI: Device [ECP] status [00000008]: functional but not present; setting present
[ 49.445460] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 49.446342] Force enabled HPET at base address 0xfed00000
[ 49.446350] PCI quirk: region f000-f07f claimed by ICH6 ACPI/GPIO/TCO
[ 49.446353] PCI quirk: region f180-f1bf claimed by ICH6 GPIO
[ 49.446546] PCI: PXH quirk detected, disabling MSI for SHPC device
[ 49.447080] PCI: Transparent bridge - 0000:00:1e.0
[ 49.447111] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 49.447330] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXA._PRT]
[ 49.447422] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXA.PXH0._PRT]
[ 49.447560] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXB._PRT]
[ 49.447645] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXC._PRT]
[ 49.447731] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXD._PRT]
[ 49.447815] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT]
[ 49.449518] ACPI: PCI Interrupt Link [LNKA] (IRQs *9 10 11)
[ 49.449589] ACPI: PCI Interrupt Link [LNKB] (IRQs 9 10 *11)
[ 49.449649] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled.
[ 49.449718] ACPI: PCI Interrupt Link [LNKD] (IRQs *9 10 11)
[ 49.449785] ACPI: PCI Interrupt Link [LNKE] (IRQs *9 10 11)
[ 49.449851] ACPI: PCI Interrupt Link [LNKF] (IRQs 9 10 11) *5
[ 49.449959] ACPI: PCI Interrupt Link [LNKG] (IRQs 9 *10 11)
[ 49.450029] ACPI: PCI Interrupt Link [LNKH] (IRQs 9 10 *11)
[ 49.450154] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 49.450179] pnp: PnP ACPI init
[ 49.450186] ACPI: bus type pnp registered
[ 49.452024] pnp: PnP ACPI: found 13 devices
[ 49.452025] ACPI: ACPI bus type pnp unregistered
[ 49.452228] PCI: Using ACPI for IRQ routing
[ 49.452230] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 49.466028] NET: Registered protocol family 8
[ 49.466030] NET: Registered protocol family 20
[ 49.466066] PCI-GART: No AMD northbridge found.
[ 49.466170] hpet clockevent registered
[ 49.466174] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 49.466178] hpet0: 3 64-bit timers, 14318180 Hz
[ 49.467211] AppArmor: AppArmor Filesystem Enabled
[ 49.470002] Time: tsc clocksource has been installed.
[ 49.478080] system 00:02: ioport range 0x200-0x207 has been reserved
[ 49.478083] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 49.478086] system 00:02: ioport range 0x400-0x40f has been reserved
[ 49.478088] system 00:02: ioport range 0x800-0x87f has been reserved
[ 49.478091] system 00:02: ioport range 0xca2-0xca3 has been reserved
[ 49.478094] system 00:02: ioport range 0xca4-0xca5 has been reserved
[ 49.478096] system 00:02: ioport range 0xe00-0xe7f has been reserved
[ 49.478099] system 00:02: ioport range 0xf000-0xf07f has been reserved
[ 49.478102] system 00:02: ioport range 0xf100-0xf10f has been reserved
[ 49.478105] system 00:02: ioport range 0xf180-0xf1bf has been reserved
[ 49.478107] system 00:02: ioport range 0xf820-0xf82f has been reserved
[ 49.478110] system 00:02: ioport range 0xfe00-0xfe00 has been reserved
[ 49.478113] system 00:02: iomem range 0xfec00000-0xfecfffff could not be reserved
[ 49.478117] system 00:02: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 49.478119] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 49.478122] system 00:02: iomem range 0xfed13000-0xfed13fff has been reserved
[ 49.478125] system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved
[ 49.478127] system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
[ 49.478130] system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
[ 49.478133] system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved
[ 49.478515] PCI: Bridge: 0000:01:00.0
[ 49.478517] IO window: 4000-4fff
[ 49.478521] MEM window: fd100000-fd2fffff
[ 49.478523] PREFETCH window: 50000000-500fffff
[ 49.478527] PCI: Bridge: 0000:00:01.0
[ 49.478528] IO window: 4000-4fff
[ 49.478531] MEM window: fd100000-fd2fffff
[ 49.478533] PREFETCH window: 50000000-500fffff
[ 49.478536] PCI: Bridge: 0000:00:1c.0
[ 49.478537] IO window: disabled.
[ 49.478540] MEM window: disabled.
[ 49.478543] PREFETCH window: disabled.
[ 49.478546] PCI: Bridge: 0000:00:1c.4
[ 49.478547] IO window: disabled.
[ 49.478551] MEM window: fd300000-fd3fffff
[ 49.478553] PREFETCH window: disabled.
[ 49.478557] PCI: Bridge: 0000:00:1c.5
[ 49.478558] IO window: disabled.
[ 49.478561] MEM window: disabled.
[ 49.478564] PREFETCH window: disabled.
[ 49.478567] PCI: Bridge: 0000:00:1e.0
[ 49.478568] IO window: disabled.
[ 49.478572] MEM window: fd400000-fdffffff
[ 49.478574] PREFETCH window: fc000000-fcffffff
[ 49.478588] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 49.478592] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 49.478604] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 49.478619] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 49.478623] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 49.478637] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
[ 49.478641] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 49.478654] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
[ 49.478659] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 49.478667] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 49.478675] NET: Registered protocol family 2
[ 49.514288] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 49.514681] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 49.515541] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 49.516244] TCP: Hash tables configured (established 131072 bind 65536)
[ 49.516247] TCP reno registered
[ 49.526457] checking if image is initramfs... it is
[ 49.966422] Switched to high resolution mode on CPU 1
[ 49.970096] Switched to high resolution mode on CPU 0
[ 50.205614] Freeing initrd memory: 8206k freed
[ 50.209442] Simple Boot Flag at 0x69 set to 0x1
[ 50.210237] audit: initializing netlink socket (disabled)
[ 50.210258] audit(1214989572.356:1): initialized
[ 50.212093] VFS: Disk quotas dquot_6.5.1
[ 50.212155] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 50.212259] io scheduler noop registered
[ 50.212261] io scheduler anticipatory registered
[ 50.212263] io scheduler deadline registered
[ 50.212359] io scheduler cfq registered (default)
[ 50.213487] Boot video device is 0000:14:03.0
[ 50.213626] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 50.213653] assign_interrupt_mode Found MSI capability
[ 50.213677] Allocate Port Service[0000:00:01.0:pcie00]
[ 50.213740] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 50.213773] assign_interrupt_mode Found MSI capability
[ 50.213800] Allocate Port Service[0000:00:1c.0:pcie00]
[ 50.213827] Allocate Port Service[0000:00:1c.0:pcie02]
[ 50.213894] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 50.213927] assign_interrupt_mode Found MSI capability
[ 50.213954] Allocate Port Service[0000:00:1c.4:pcie00]
[ 50.213981] Allocate Port Service[0000:00:1c.4:pcie02]
[ 50.214048] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 50.214081] assign_interrupt_mode Found MSI capability
[ 50.214108] Allocate Port Service[0000:00:1c.5:pcie00]
[ 50.214136] Allocate Port Service[0000:00:1c.5:pcie02]
[ 50.235329] Real Time Clock Driver v1.12ac
[ 50.235512] hpet_resources: 0xfed00000 is busy
[ 50.235531] Linux agpgart interface v0.102
[ 50.235534] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 50.235662] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 50.235788] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 50.236293] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 50.236471] 00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 50.237063] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 50.237120] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 50.237201] PNP: PS/2 Controller [PNP0303:KEYB,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 50.239908] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 50.239912] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 50.253752] mice: PS/2 mouse device common for all mice
[ 50.253792] cpuidle: using governor ladder
[ 50.253794] cpuidle: using governor menu
[ 50.253943] NET: Registered protocol family 1
[ 50.253990] registered taskstats version 1
[ 50.254069] Magic number: 0:173:120
[ 50.254163] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open
rtc device (rtc0)
[ 50.254166] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 50.254167] EDD information not available.
[ 50.254174] Freeing unused kernel memory: 316k freed
[ 50.291819] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 51.422919] fuse init (API version 7.9)
[ 51.437210] ACPI Exception (processor_core-0816): AE_NOT_FOUND,
Processor Device is not present [20070126]
[ 51.437220] ACPI Exception (processor_core-0816): AE_NOT_FOUND,
Processor Device is not present [20070126]
[ 51.642435] SCSI subsystem initialized
[ 51.650047] Fusion MPT base driver 3.04.06
[ 51.650050] Copyright (c) 1999-2007 LSI Corporation
[ 51.659358] Fusion MPT SAS Host driver 3.04.06
[ 51.659420] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 25 (level, low) -> IRQ 25
[ 51.659434] mptbase: ioc0: Initiating bringup
[ 51.670901] usbcore: registered new interface driver usbfs
[ 51.670922] usbcore: registered new interface driver hub
[ 51.678413] usbcore: registered new device driver usb
[ 51.687434] USB Universal Host Controller Interface driver v3.0
[ 51.751261] libata version 3.00 loaded.
[ 52.361721] ioc0: LSISAS1068 B0: Capabilities={Initiator}
[ 62.571038] scsi0 : ioc0: LSISAS1068 B0, FwRev=01122800h, Ports=1, MaxQ=511, IRQ=25
[ 62.594468] scsi 0:0:0:0: Direct-Access SEAGATE ST3146755SS 1752 PQ: 0 ANSI: 5
[ 62.614531] scsi 0:0:1:0: Direct-Access SEAGATE ST3146755SS 1752 PQ: 0 ANSI: 5
[ 63.566792] scsi 0:1:0:0: Direct-Access LSILOGIC Logical Volume 3000 PQ: 0 ANSI: 2
[ 63.567246] tg3.c:v3.86 (November 9, 2007)
[ 63.567270] ACPI: PCI Interrupt 0000:0d:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 63.567279] PCI: Setting latency timer of device 0000:0d:00.0 to 64
[ 63.575472] Driver 'sd' needs updating - please use bus_type methods
[ 63.576316] sd 0:1:0:0: [sda] 285155328 512-byte hardware sectors (146000 MB)
[ 63.576543] sd 0:1:0:0: [sda] Write Protect is off
[ 63.576545] sd 0:1:0:0: [sda] Mode Sense: 03 00 00 08
[ 63.576929] sd 0:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't
support DPO or FUA
[ 63.577359] sd 0:1:0:0: [sda] 285155328 512-byte hardware sectors (146000 MB)
[ 63.577586] sd 0:1:0:0: [sda] Write Protect is off
[ 63.577588] sd 0:1:0:0: [sda] Mode Sense: 03 00 00 08
[ 63.577975] sd 0:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't
support DPO or FUA
[ 63.577981] sda: sda1 sda2
[ 63.588626] eth0: Tigon3 [partno(BCM95721) rev 4201 PHY(5750)] (PCI Express)
10/100/1000Base-T Ethernet 00:19:99:19:fe:a2
[ 63.588631] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1]
[ 63.588633] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 63.588673] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 63.588684] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 63.588688] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 63.588933] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 63.588960] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002000
[ 63.589068] usb usb1: configuration #1 chosen from 1 choice
[ 63.589089] hub 1-0:1.0: USB hub found
[ 63.589093] hub 1-0:1.0: 2 ports detected
[ 63.589138] sd 0:1:0:0: [sda] Attached SCSI disk
[ 63.592841] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 63.592859] scsi 0:0:1:0: Attached scsi generic sg1 type 0
[ 63.592875] sd 0:1:0:0: Attached scsi generic sg2 type 0
[ 63.692695] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22
[ 63.692710] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 63.692714] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 63.692742] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 63.692773] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00002400
[ 63.692879] usb usb2: configuration #1 chosen from 1 choice
[ 63.692896] hub 2-0:1.0: USB hub found
[ 63.692901] hub 2-0:1.0: 2 ports detected
[ 63.776980] Attempting manual resume
[ 63.776982] swsusp: Resume From Partition 8:2
[ 63.776984] PM: Checking swsusp image.
[ 63.777183] PM: Resume from disk failed.
[ 63.782930] ReiserFS: sda1: found reiserfs format "3.6" with standard journal
[ 63.782938] ReiserFS: sda1: using ordered data mode
[ 63.793390] ReiserFS: sda1: journal params: device sda1, size 8192, journal first
block 18, max trans
len 1024, max batch 900, max commit age 30, max trans age 30
[ 63.793814] ReiserFS: sda1: checking transaction log (sda1)
[ 63.796710] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 21
[ 63.796726] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 63.796731] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 63.796772] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 63.796817] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00002800
[ 63.796925] usb usb3: configuration #1 chosen from 1 choice
[ 63.796944] hub 3-0:1.0: USB hub found
[ 63.796948] hub 3-0:1.0: 2 ports detected
[ 63.821432] ReiserFS: sda1: Using r5 hash to sort names
[ 63.900611] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 20 (level, low) -> IRQ 20
[ 63.900623] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 63.900627] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 63.900653] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 63.900680] uhci_hcd 0000:00:1d.3: irq 20, io base 0x00002c00
[ 63.900778] usb usb4: configuration #1 chosen from 1 choice
[ 63.900796] hub 4-0:1.0: USB hub found
[ 63.900800] hub 4-0:1.0: 2 ports detected
[ 64.004576] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 64.005126] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 64.005131] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 64.005172] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 64.009074] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 64.009080] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfd000000
[ 64.023463] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 64.023571] usb usb5: configuration #1 chosen from 1 choice
[ 64.023594] hub 5-0:1.0: USB hub found
[ 64.023600] hub 5-0:1.0: 8 ports detected
[ 64.127541] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 64.127578] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 64.127589] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 71.944848] iTCO_vendor_support: vendor-support=0
[ 71.987025] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 71.987149] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0xf060)
[ 71.987186] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 72.009239] ata_piix 0000:00:1f.2: version 2.12
[ 72.009247] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 72.040893] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 72.091777] intel_rng: FWH not detected
[ 72.159133] input: Power Button (FF) as /devices/virtual/input/input2
[ 72.164725] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 72.164753] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 72.167634] scsi1 : ata_piix
[ 72.167693] scsi2 : ata_piix
[ 72.168115] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3400 irq 14
[ 72.168118] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x3408 irq 15
[ 72.191704] ACPI: Power Button (FF) [PWRF]
[ 72.191787] input: Power Button (CM) as /devices/virtual/input/input3
[ 72.215700] ACPI: Power Button (CM) [PWRB]
[ 72.652821] ata2.00: ATAPI: TSSTcorpDVD-ROM TS-H352D, FS00, max UDMA/33
[ 72.824670] ata2.00: configured for UDMA/33
[ 72.825818] scsi 2:0:0:0: CD-ROM TSSTcorp DVD-ROM TS-H352D FS00 PQ: 0 ANSI: 5
[ 72.825894] scsi 2:0:0:0: Attached scsi generic sg3 type 5
[ 72.825956] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 73.578446] parport_pc 00:0a: reported by Plug and Play ACPI
[ 73.578474] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 73.582455] Driver 'sr' needs updating - please use bus_type methods
[ 73.588187] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 73.588192] Uniform CD-ROM driver Revision: 3.20
[ 73.588228] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 73.589180] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 74.282653] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 75.574645] lp0: using parport0 (interrupt-driven).
[ 75.627818] Adding 1951888k swap on /dev/sda2. Priority:-1 extents:1 across:1951888k
[ 90.457686] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 91.712190] No dock devices found.
[ 92.539778] ppdev: user-space parallel port driver
[ 93.628572] audit(1214989616.704:2): type=1503 operation="inode_permission" requested_mask="a::"
denied_mask="a::" name="/dev/tty" pid=5030 profile="/usr/sbin/cupsd" namespace="default"
[ 94.178944] Bluetooth: Core ver 2.11
[ 94.179020] NET: Registered protocol family 31
[ 94.179021] Bluetooth: HCI device and connection manager initialized
[ 94.179024] Bluetooth: HCI socket layer initialized
[ 94.194925] Bluetooth: L2CAP ver 2.9
[ 94.194929] Bluetooth: L2CAP socket layer initialized
[ 94.236224] Bluetooth: RFCOMM socket layer initialized
[ 94.236240] Bluetooth: RFCOMM TTY layer initialized
[ 94.236241] Bluetooth: RFCOMM ver 1.8
[ 116.249797] NET: Registered protocol family 10
[ 116.249976] lo: Disabled Privacy Extensions
[ 116.250238] ADDRCONF(NETDEV_UP): eth0: link is not ready--
lspci:
00:00.0 Host bridge: Intel Corporation E7230/3000/3010 Memory Controller Hub (rev c0)
00:01.0 PCI bridge: Intel Corporation E7230/3000/3010 PCI Express Root Port (rev c0)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 (rev 01)
00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
01:00.0 PCI bridge: Intel Corporation 6702PXH PCI Express-to-PCI Bridge A (rev 09)
02:05.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068 PCI-X Fusion-MPT SAS (rev 01)
0d:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express (rev 21)
14:03.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02)
- trey blogja
- A hozzászóláshoz be kell jelentkezni
- 1005 megtekintés
Hozzászólások
Mennyire elterjedt a Matrox VGA a szerverlapokban? Mert a desktop piacrol elegge kiszoruloban van...
- A hozzászóláshoz be kell jelentkezni
Én speciel nagyon ritkán találkozom vele. Ha igen, akkor én is rá szoktam csodálkozni.
--
trey @ gépház
- A hozzászóláshoz be kell jelentkezni
egy freebsd-t nem próbálnál rá?
- A hozzászóláshoz be kell jelentkezni
- A hozzászóláshoz be kell jelentkezni