Vadiuj Huawei e220

Modemek

Hello,

Azert inditottam ezt a topic-ot, mivel egy specialis problemat szeretnek megoldani a fenti modemmel.
Nevezetesen azt, hogy egy vadiuj modemet eddig meg mindig be kellett dugni egy xp-s gepbe, csak azutan
lehetett hasznalni linux alatt. Most egy munka kapcsan 3 db. szuz e220 hentereg az asztalomon, a jelenseg ugyanaz.
Szoval a kollektiv bolcsessegre apellalva szeretnem, ha megoldodna ez az idegesito dolog.

Felreertesek elkerulese vegett a modemet felimeri a gepem, mar tobb mint egy eve hasznalom a sajat e220-amat.
Ha a sajat sim kartyamat atteszem az uj modembe - sim keres ki van kapcsolva - akkor sem tud connectalni.
A logbol szamomra az derul ki, hogy az ipcp req-ra egyszeruen nem erkezik valasz. Tehat nem reject, hanem _semmi_.
Erdekes, hogy az ipcp varakozas kozben az lcp keresekre erkezik valasz.
Nagyon sok ppp beallitast vegigprobaltam, semmi sem segitett. Ebbol gondolom, hogy a modemmel van valami bellitasi problema.
A Sajat modememmel rendesen mukodik minden.

Itt a log, bekapcsoltam dump-ot is, hogy latszanak a beallitasok:

Mar 23 15:52:50 localhost pppd[6854]: pppd options in effect:
Mar 23 15:52:50 localhost pppd[6854]: debug^I^I# (from /etc/ppp/options)
Mar 23 15:52:50 localhost pppd[6854]: -detach^I^I# (from command line)
Mar 23 15:52:50 localhost pppd[6854]: idle 0^I^I# (from command line)
Mar 23 15:52:50 localhost pppd[6854]: logfd 6^I^I# (from command line)
Mar 23 15:52:50 localhost pppd[6854]: dump^I^I# (from /etc/ppp/peers/wvdial)
Mar 23 15:52:50 localhost pppd[6854]: noauth^I^I# (from /etc/ppp/peers/wvdial)
Mar 23 15:52:50 localhost pppd[6854]: -pap^I^I# (from /etc/ppp/peers/wvdial)
Mar 23 15:52:50 localhost pppd[6854]: -chap^I^I# (from /etc/ppp/peers/wvdial)
Mar 23 15:52:50 localhost pppd[6854]: name localhost^I^I# (from /etc/ppp/peers/wvdial)
Mar 23 15:52:50 localhost pppd[6854]: user zamek1^I^I# (from command line)
Mar 23 15:52:50 localhost pppd[6854]: usehostname^I^I# (from command line)
Mar 23 15:52:50 localhost pppd[6854]: 921600^I^I# (from command line)
Mar 23 15:52:50 localhost pppd[6854]: lock^I^I# (from /etc/ppp/options)
Mar 23 15:52:50 localhost pppd[6854]: crtscts^I^I# (from command line)
Mar 23 15:52:50 localhost pppd[6854]: modem^I^I# (from command line)
Mar 23 15:52:50 localhost pppd[6854]: asyncmap 0^I^I# (from /etc/ppp/peers/wvdial)
Mar 23 15:52:50 localhost pppd[6854]: mtu 1460^I^I# (from /etc/ppp/peers/wvdial)
Mar 23 15:52:50 localhost pppd[6854]: lcp-echo-failure 4^I^I# (from /etc/ppp/options)
Mar 23 15:52:50 localhost pppd[6854]: lcp-echo-interval 30^I^I# (from /etc/ppp/options)
Mar 23 15:52:50 localhost pppd[6854]: hide-password^I^I# (from /etc/ppp/options)
Mar 23 15:52:50 localhost pppd[6854]: noipdefault^I^I# (from command line)
Mar 23 15:52:50 localhost pppd[6854]: ipcp-restart 10^I^I# (from /etc/ppp/peers/wvdial)
Mar 23 15:52:50 localhost pppd[6854]: ipcp-max-configure 10^I^I# (from /etc/ppp/peers/wvdial)
Mar 23 15:52:50 localhost pppd[6854]: ipcp-max-failure 10^I^I# (from /etc/ppp/peers/wvdial)
Mar 23 15:52:50 localhost pppd[6854]: defaultroute^I^I# (from command line)
Mar 23 15:52:50 localhost pppd[6854]: proxyarp^I^I# (from /etc/ppp/options)
Mar 23 15:52:50 localhost pppd[6854]: usepeerdns^I^I# (from command line)
Mar 23 15:52:50 localhost pppd[6854]: noccp^I^I# (from /etc/ppp/peers/wvdial)
Mar 23 15:52:50 localhost pppd[6854]: noipx^I^I# (from /etc/ppp/options)
Mar 23 15:52:50 localhost pppd[6854]: pppd 2.4.4 started by root, uid 0
Mar 23 15:52:50 localhost pppd[6854]: using channel 48
Mar 23 15:52:50 localhost kernel: DEV: registering device: ID = 'ppp0'
Mar 23 15:52:50 localhost kernel: PM: Adding info for No Bus:ppp0
Mar 23 15:52:50 localhost pppd[6854]: Using interface ppp0
Mar 23 15:52:50 localhost pppd[6854]: Connect: ppp0 <--> /dev/ttyUSB1
Mar 23 15:52:50 localhost pppd[6854]: sent [LCP ConfReq id=0x1
]
Mar 23 15:52:50 localhost pppd[6854]: rcvd [LCP ConfReq id=0x22
]
Mar 23 15:52:50 localhost pppd[6854]: sent [LCP ConfNak id=0x22 ]
Mar 23 15:52:50 localhost pppd[6854]: rcvd [LCP ConfAck id=0x1
]
Mar 23 15:52:50 localhost pppd[6854]: rcvd [LCP ConfReq id=0x23
]
Mar 23 15:52:50 localhost pppd[6854]: sent [LCP ConfNak id=0x23 ]
Mar 23 15:52:50 localhost pppd[6854]: rcvd [LCP ConfReq id=0x24
]
Mar 23 15:52:50 localhost pppd[6854]: sent [LCP ConfNak id=0x24 ]
Mar 23 15:52:50 localhost pppd[6854]: rcvd [LCP ConfReq id=0x25
]
Mar 23 15:52:50 localhost pppd[6854]: sent [LCP ConfNak id=0x25 ]
Mar 23 15:52:50 localhost pppd[6854]: rcvd [LCP ConfReq id=0x26
]
Mar 23 15:52:50 localhost pppd[6854]: sent [LCP ConfNak id=0x26 ]
Mar 23 15:52:50 localhost pppd[6854]: rcvd [LCP ConfReq id=0x27
]
Mar 23 15:52:50 localhost pppd[6854]: sent [LCP ConfRej id=0x27 ]
Mar 23 15:52:50 localhost pppd[6854]: rcvd [LCP ConfReq id=0x28
]
Mar 23 15:52:50 localhost pppd[6854]: sent [LCP ConfAck id=0x28
]
Mar 23 15:52:50 localhost pppd[6854]: sent [LCP EchoReq id=0x0 magic=0xbc86f6f2]
Mar 23 15:52:50 localhost pppd[6854]: sent [IPCP ConfReq id=0x1 ]
Mar 23 15:52:50 localhost pppd[6854]: rcvd [LCP DiscReq id=0x29 magic=0xd0c73f10]
Mar 23 15:52:50 localhost pppd[6854]: rcvd [LCP EchoRep id=0x0 magic=0xd0c73f10 bc 86 f6 f2]
Mar 23 15:52:50 localhost pppd[6854]: Modem hangup
Mar 23 15:52:50 localhost pppd[6854]: Connection terminated.
Mar 23 15:52:50 localhost kernel: PM: Removing info for No Bus:ppp0
Mar 23 15:52:50 localhost pppd[6854]: Exit.

  • 3080 megtekintés

( andrej_ v | 2008. 03. 23., v – 18:20 )

Ez érdekes, mert pénteken szereztem be én is egy tmobile -os E220-at és windowst sosem látott. Nem elsőre, de az egyik itteni topikban leírtak szerint megy a dolog. (Most is arról netezek.)

( LeslieT | 2008. 03. 23., v – 18:28 )

Hi,
Amennyiben nem volt beallitva es elmentve meg a modembe az APN, azt be kell allitanod.
A legjobb modszer ha a tarcsazoban az init stringek koze felveszed az AT+CGDCONT=1,"IP","NET" parancsot (publikus net eseten), es a tarcsazas *99***1# szammal tortenjen. Igy biztos hogy minden hozzadugott modemmel azonnal mukodni fog.

Megtortent, semmi eredmeny:

--> WvDial: Internet dialer version 1.56
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1,"IP","NET"
AT+CGDCONT=1,"IP","NET"
OK
--> Modem initialized.
--> Sending: ATDT*99***1#
--> Waiting for carrier.
ATDT*99***1#
CONNECT
--> Carrier detected. Waiting for prompt.
--> Don't know what to do! Starting pppd and hoping for the best.
--> Starting pppd at Sun Mar 23 18:46:38 2008
--> Pid of pppd: 6090
--> Using interface ppp1
--> Authentication (PAP) started
--> Authentication (PAP) successful
--> Terminate Request (Message: "No network protocols running" )
--> Terminate Request (Message: "No network protocols running" )

itt a log:

Mar 23 18:46:38 zamek pppd[6090]: using channel 4
Mar 23 18:46:38 zamek pppd[6090]: Using interface ppp1
Mar 23 18:46:38 zamek pppd[6090]: Connect: ppp1 <--> /dev/ttyUSB2
Mar 23 18:46:38 zamek pppd[6090]: sent [LCP ConfReq id=0x1
]
Mar 23 18:46:38 zamek pppd[6090]: rcvd [LCP ConfReq id=0x8
]
Mar 23 18:46:38 zamek pppd[6090]: sent [LCP ConfNak id=0x8 ]
Mar 23 18:46:38 zamek pppd[6090]: rcvd [LCP ConfAck id=0x1
]
Mar 23 18:46:38 zamek pppd[6090]: rcvd [LCP ConfReq id=0x9
]
Mar 23 18:46:38 zamek pppd[6090]: sent [LCP ConfAck id=0x9
]
Mar 23 18:46:38 zamek pppd[6090]: sent [LCP EchoReq id=0x0 magic=0x8ddff678]
Mar 23 18:46:38 zamek pppd[6090]: sent [PAP AuthReq id=0x1 user="pannon" password=]
Mar 23 18:46:38 zamek pppd[6090]: rcvd [LCP DiscReq id=0xa magic=0xd0ea61a4]
Mar 23 18:46:38 zamek pppd[6090]: rcvd [LCP EchoRep id=0x0 magic=0xd0ea61a4 8d df f6 78]
Mar 23 18:46:38 zamek pppd[6090]: rcvd [PAP AuthAck id=0x1 ""]
Mar 23 18:46:38 zamek pppd[6090]: PAP authentication succeeded
Mar 23 18:46:38 zamek pppd[6090]: sent [CCP ConfReq id=0x1 ]
Mar 23 18:46:38 zamek pppd[6090]: sent [IPCP ConfReq id=0x1 ]
Mar 23 18:46:38 zamek pppd[6090]: rcvd [LCP ProtRej id=0xb 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f]
Mar 23 18:46:38 zamek pppd[6090]: Protocol-Reject for 'Compression Control Protocol' (0x80fd) received
Mar 23 18:46:41 zamek pppd[6090]: sent [IPCP ConfReq id=0x1 ]
Mar 23 18:47:05 zamek last message repeated 8 times
Mar 23 18:47:08 zamek pppd[6090]: sent [LCP EchoReq id=0x1 magic=0x8ddff678]
Mar 23 18:47:08 zamek pppd[6090]: IPCP: timeout sending Config-Requests
Mar 23 18:47:08 zamek pppd[6090]: sent [LCP TermReq id=0x2 "No network protocols running"]
Mar 23 18:47:11 zamek pppd[6090]: sent [LCP TermReq id=0x3 "No network protocols running"]
Mar 23 18:47:14 zamek pppd[6090]: Connection terminated.
Mar 23 18:47:14 zamek pppd[6090]: Modem hangup
Mar 23 18:47:14 zamek pppd[6090]: Exit.

[Dialer Defaults]
ISDN=0
Idle Seconds=0
Baud=921600
Phone =*99***1#
Ask Password=0
Stupid Mode = 0
Auto DNS=0
Dial Attempts=1
Auto Reconnect=0
Abort on Busy=0
Carrier Check=1
Check Def Route=1
Abort on No Dialtone=1
Modem=/dev/ttyUSB2
Username = pannon
Password = ******
Dial Command=ATDT
Init1=ATZ
Init3=ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init4=
Init5=AT+CGDCONT=1,"IP","NET"

Azert erdekes hogy nem megy, mert anno en is szivtam vele, hogy windowsos beallitas nelkul nem akart mukodni, es mint kiderult az APN beallitas volt a ludas. De akkor lehet hogy meg volt valami...
Probald meg igy:

[Dialer Defaults]
Modem = /dev/ttyUSB2
Baud = 460800
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,"IP","NET"
Stupid Mode = 1
Modem Type = Analog Modem
Phone = *99***1#
New PPPD = yes
ISDN = 0
Username = pannon
Password = pannon

Kozben talaltam egy leirast, ahol ugyanarrol beszelnek, hogy be kell dugni egy xp-be es kilistazza a kulonbseget is:
http://wwwu.uni-klu.ac.at/agebhard/HuaweiE220/

Today I had the chance to configure another Huawei E220 (also from One), this time I noticed that it only started to work after I ran it once under Windows (which I also did with my first modem). I compared the modem default settings (AT&V) before and after, and it turned out that the firsttime start under Windows changed some of these values:

before:

+CFUN:; +CSCS: "IRA"; +CSTA: 129; +CR: 0; +CRC: 0; +CMEE: 2; +CGDCONT: (1,"IP","","",0,0);
+CGDSCONT: ; +CGTFT: ; +CGEQREQ: (1,2,0,0,0,0,2,0,"0E0","0E0",3,0,0),(2,2,0,0,0,0,2,0,"0E0","0E0",3,0,0),(3,2,0,0,0,0,2,0,"0E0","0E0);
+CGEQMIN: ; +CGQREQ: ; +CGQMIN: ; +CGEREP: 0,0; +CGDATA: "PPP";

after (see above for full listing):

+CFUN:; +CSCS: "IRA"; +CSTA: 129; +CR: 0; +CRC: 0; +CMEE: 2; +CGDCONT: (1,"IP","fullspeed","",0,0);
+CGDSCONT: ; +CGTFT: ; +CGEQREQ: (1,2,0,0,0,0,2,0,"0E0","0E0",3,0,0),(2,2,0,0,0,0,2,0,"0E0","0E0",3,0,0),(3,2,0,0,0,0,2,0,"0E0","0E0",3,0,0),(4,2,0,0,0,0,);
+CGEQMIN: ; +CGQREQ: ; +CGQMIN: ; +CGEREP: 0,0; +CGDATA: "PPP";

Note the differences in +CGDCONT and the 3rd argument (and additional 4th argument) of +CGEREQ.

I guess instead of running it under Windows one time it will suffice to change these values with AT commands. But of course these values will depend on your provider ...

Osszekomparaltam a ket modem beallitasait, tok egyforma:(
Nincs tobb otletem.

&C: 2; &D: 2; &F: 0; E: 1; L: 0; M: 0; Q: 0; V: 1; X: 0; Z: 0; S0: 0;
S3: 13; S4: 10; S5: 8; S6: 2; S7: 50; S8: 2; S9: 6; S10: 14; S11: 95;
+FCLASS: 0; +ICF: 3,3; +IFC: 2,2; +IPR: 115200; +DR: 0; +DS: 0,0,2048,6;
+WS46: 12; +CBST: 0,0,1;
+CRLP: (61,61,48,6,0),(61,61,48,6,1),(240,240,52,6,2);
+CV120: 1,1,1,0,0,0; +CHSN: 0,0,0,0; +CSSN: 0,0; +CREG: 0; +CGREG: 0;
+CFUN:; +CSCS: "IRA"; +CSTA: 129; +CR: 0; +CRC: 0; +CMEE: 2; +CGDCONT: (1,"IP","NET","",0,0)
; +CGDSCONT: ; +CGTFT: ; +CGEQREQ: (1,2,0,0,0,0,2,0,"0E0","0E0",3,0,0),(2,2,0,0,0,0,2,0,"0E0","0)
; +CGEQMIN: ; +CGQREQ: (3,0,0,0,0,0); +CGQMIN: (1,0,0,0,0,0);
+CGEREP: 0,0; +CGDATA: "PPP"; +CGCLASS: "B"; +CGSMS: 3; +CSMS: 0;
+CMGF: 0; +CSCA: "",; +CSMP: ,,0,0; +CSDH: 0; +CSCB: 0,"",""; +FDD: 0;
+FAR: 0; +FCL: 0; +FIT: 0,0; +ES: ,,; +ESA: 0,,,,0,0,255,; +CMOD: 0;
+CVHU: 1; +CPIN: ˙˙˙˙˙˙˙˙,˙˙˙˙˙˙˙˙; +CMEC: 0,0,0; +CKPD: 1,1; +CGATT: 0;
+CGACT: 0; +CPBS: "SM"; +CPMS: "SM","SM","SM"; +CNMI: 0,0,0,0,0;
+CMMS: 2; +FTS: 0; +FRS: 0; +FTH: 3; +FRH: 3; +FTM: 96; +FRM: 96;
+CCUG: 0,0,0; +COPS: 0,0,""; +CUSD: 0; +CAOC: 1; +CCWA: 0;
+CPOL: 0,2,"",0,0,0; +CPLS: 0; +CTZR: 0; +CTZU: 0; +CLIP: 0; +COLP: 0;
+CDIP: 0; ^PORTSEL: 0; ^CPIN: ˙˙˙˙˙˙˙˙,˙˙˙˙˙˙˙˙; ^ATRECORD: 0;
^FREQLOCK: 11691428,1162820144