lilo: install-mbr failed!

Hali

Szeretném lecserélni a grub-ot lilo-ra.
A konfignál kiakad azzal a hibával, hogy nem tudja írni az mbr-t
Több fórumon is olvastam, de megoldást nem találtam, ezt a hibát sem találtam.
A grub-ot még nem távolítottam el.

root#liloconfig
LILO, the LInux LOader, sets up your system to boot Linux directly
from your hard disk, without the need for a boot floppy.

You must do three things to make the Linux system boot from the
hard disk. Install a partition boot record, install a master boot
record, and set the partition active. You'll be asked to perform

each of these tasks. You may skip any or all of them, and perform
them manually later on.

This will result in Linux being booted by default from the hard disk.
If your setup is complicated or unusual you should consider writing your
own customised /etc/lilo.conf. To do this you should exit this configuration
program and refer to the comprehensive lilo documentation, which can be
found in /usr/share/doc/lilo/.

Install a partition boot record to boot Linux from /dev/hda2? [Yes]

   ==========================================================================
Creating small lilo.conf and running lilo.
Use LBA32 for addressing big disks using new BIOS features ? [Yes]

   ==========================================================================
Searching for installed kernels and updating image entries ...
The following is the list of the available bitmaps:

1. /boot/sarge.bmp
2. /boot/sid.bmp
3. /boot/coffee.bmp
4. /boot/debianlilo.bmp

Enter the number of the bitmap: 2
Warning: '/proc/partitions' does not match '/dev' directory structure.
    Name change: '/dev/dm-0' -> '/dev/evms/hda1'
Warning: Unable to determine video adapter in use in the present system.
Added Lin_2.6.15img0 *
Added Memory_Test+

A master boot record is required to run the partition boot record.
If you are already using a boot manager, and want to keep it,
answer "no" to the following question. If you don't know
what a boot manager is or whether you have one, answer "yes".
Install a master boot record on /dev/hda? [No] yes

   ==========================================================================
Installing MBR on /dev/hda
ERROR: install-mbr failed! Your system may not be bootable.

Kipróbáltam úgy is, hogy a /dev/hda2-re telepítettem az mbr-t oda engedte, de a grub bootolt.

A master boot record is required to run the partition boot record.
If you are already using a boot manager, and want to keep it,
answer "no" to the following question. If you don't know
what a boot manager is or whether you have one, answer "yes".
Install a master boot record on /dev/hda? [No] no

   ==========================================================================

The master boot record will boot the active partition.
If you want your system to boot another operating system,
such as DOS or Windows, by default, answer "no" to the following
question. You may still use your boot manager or the master
boot record to boot Linux. If you want the system to boot Linux.
by default, answer "yes". In this case you could still boot some
other OS if you know what partition it is on.
Make /dev/hda2 the active partition? [Yes]

   ==========================================================================
Activating Partition 2 on disk /dev/hda.

LILO successfully configured; Linux will be booted by default.
If you installed the master boot record, you can boot a different
OS by holding down the shift key as the system boots, and then
pressing the key corresponding to the partition containing that
OS when you see the "1234F:" prompt.

For more information about LILO, see the documentation in
/usr/share/doc/lilo/. For details about the MBR, see also
/usr/share/doc/mbr/.

Kérdések:
Hogyan tudom eltávolítani a grub-ot és feltenni a lilo-t?
Először: MBR törlése? Majd lilo betöltése?
Köszi

Szép napot!

Hali
Laci