( gyuri23 | 2023. 04. 24., h – 14:03 )

Rád nézve tényleg :D

Szuper, eljutottunk a személyeskedésig :D

Hogy egy kis szakma is legyen idézek két ZFS guru cég (proxmox, truenas) doksijából. Olvasd el és válaszolj igen-nemmel, hogy jó ötlet-e a hw raid a ZFS alá, mivel neked maga az OpenZFS leírása nem elég (költői kérés, nem kell válaszolnod):

Important
Do not use ZFS on top of a hardware RAID controller which has its own cache management. ZFS
needs to communicate directly with the disks. An HBA adapter or something like an LSI controller
flashed in “IT” mode is more appropriate.

There are countless warnings against using hardware RAID cards with TrueNAS. ZFS and TrueNAS provide a built-in RAID that protects your data better than any hardware RAID card. You can use a hardware RAID card if it is all you have, but there are limitations. First and most importantly, do not use their RAID facility if your hardware RAID card supports HBA mode, also known as passthrough or JBOD mode (there is one caveat in the bullets below). When used, it allows it to perform indistinguishably from a standard HBA. If your RAID card does not have this mode, you can configure a RAID0 for every disk in your system. While not the ideal setup, it works in a pinch. If repurposing hardware RAID cards with TrueNAS, be aware that some hardware RAID cards: