Hello!
Az lenne a problemam hogy csinaltam 2 raid1 tombot
2db 300g s maxtor-ral
Vendor: ATA Model: Maxtor 6V300F0 Rev: VA11
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: Maxtor 6V300F0 Rev: VA11
Type: Direct-Access ANSI SCSI revision: 05
fstab
proc /proc proc defaults 0 0
/dev/md1 / xfs defaults 0 1
/dev/md0 /boot ext3 defaults 0 2
/dev/sda1 none swap sw 0 0
/dev/sdb1 none swap sw 0 0
mdadm.conf
DEVICE partitions
ARRAY /dev/md1 level=raid1 num-devices=2 UUID=2841e963:19cabae7:bab4ba3a:896e74d1
devices=/dev/sda3,/dev/sdb3
ARRAY /dev/md0 level=raid1 num-devices=2 UUID=b769d0b4:d1c9debc:5d1032af:d1e0c084
devices=/dev/sda2,/dev/sdb2
Es a problemam az hogy bootolas utan md0 megy szepen de md1 csak fel labon sdb3 at nem teszi be, de semmi hibat nem ir dmesg ,kezzel tudom hotaddolni es semmi problema csak ha restartolnom/kikapcsolom a gepet akkor megint kezzel kell addolni:(
dmesg |grep md
md: md1 stopped.
md: bind
raid1: raid set md1 active with 1 out of 2 mirrors
md: md0 stopped.
md: bind
md: bind
raid1: raid set md0 active with 2 out of 2 mirrors
- 944 megtekintés