Koszi Saabi a kommentart,
sikerult megoldanom.
Szerintem ez volt a bibi :
=====================
swinstall could fail with a message like below:
ERROR: Could not access remote file ...
due to an internal error on the remote system.
This problem is likely caused by a problem in the DNS setup. swinstall needs to be able to perform a reverse DNS lookup. If the reverse lookup results in a different host name then swinstall seems to asumme it installs to a remote system.
It is worth checking that the host name and the resolving through the IP address actually result in the same host name (possibly fully qualified).
You possibly need to restart swagentd.
As an alternative setting the swinstall option All targets to resolve the source locally seems to avoid the problem.
====================
DNS-ben beallittattam a nevet, amely ugyanaz mint a hostname.
Alias-kent pedig a gep igazi nevet adtam meg.
Igy kb. fel ora mulva ok lett a rendszer - ami abban nyilvanult meg,
hogy nslookup xx.xx.xx.xx parancsra az /etc/hosts-ban definialt IP es hostname jelent meg.
Es /etc/hosts-ban atirtam erre:
127.0.0.1 localhost loopback
xxx.xxx.xx.xx cgw22 cgw22.xx.xx.xxxx.com
Ezek utan
swlist -s /share/mydepot/xxx.depot -->OK
swinstall -s cgw22:/share/mydepot/xxx.depot VALAMI -->OK
ardi
PS: Ugy latszik, nagyon elore orultem.
Miutan feltettem mindent, reboot utan hibat kaptam:
Stored message buffer up to panic:
, bus: 8
SCSI: Reset detected -- lbolt: 9328, bus: 8
SCSI: Reset detected -- lbolt: 9328, bus: 8
SCSI: Reset detected -- lbolt: 9328, bus: 8
SCSI: Reset detected -- lbolt: 9328, bus: 8
SCSI: Reset detected -- lbolt: 9328, bus: 8
SCSI: Reset detected -- lbolt: 9329, bus: 8
SCSI: Reset detected -- lbolt: 9329, bus: 8
SCSI: Reset detected -- lbolt: 9329, bus: 8
SCSI: Reset detected -- lbolt: 9329, bus: 8
SCSI: Reset detected -- lbolt: 9330, bus: 8
SCSI: Reset detected -- lbolt: 9330, bus: 8
SCSI: Reset detected -- lbolt: 9330, bus: 8
SCSI: Reset detected -- lbolt: 9330, bus: 8
SCSI: Reset detected -- lbolt: 9331, bus: 8
SCSI: Reset detected -- lbolt: 9331, bus: 8
SCSI: Reset detected -- lbolt: 9331, bus: 8
SCSI: Reset detected -- lbolt: 9331, bus: 8
SCSI: Reset detected -- lbolt: 9332, bus: 8
SCSI: Reset detected -- lbolt: 9332, bus: 8
SCSI: Reset detected -- lbolt: 9332, bus: 8
SCSI: Reset detected -- lbolt: 9332, bus: 8
SCSI: Reset detected -- lbolt: 9333, bus: 8
SCSI: Reset detected -- lbolt: 9333, bus: 8
SCSI: Reset detected -- lbolt: 9333, bus: 8
SCSI: Reset detected -- lbolt: 9333, bus: 8
SCSI: Reset detected -- lbolt: 9334, bus: 8
SCSI: Reset detected -- lbolt: 9334, bus: 8
SCSI: Reset detected -- lbolt: 9334, bus: 8
SCSI: Reset detected -- lbolt: 9334, bus: 8
SCSI: Reset detected -- lbolt: 9335, bus: 8
SCSI: Reset detected -- lbolt: 9335, bus: 8
SCSI: Reset detected -- lbolt: 9335, bus: 8
SCSI: Reset detected -- lbolt: 9335, bus: 8
SCSI: Reset detected -- lbolt: 9336, bus: 8
SCSI: Reset detected -- lbolt: 9336, bus: 8
SCSI: Reset detected -- lbolt: 9336, bus: 8
SCSI: Reset detected -- lbolt: 9336, bus: 8
SCSI: Reset detected -- lbolt: 9337, bus: 8
SCSI: Reset detected -- lbolt: 9337, bus: 8
SCSI: Reset detected -- lbolt: 9337, bus: 8
SCSI: Reset detected -- lbolt: 9337, bus: 8
SCSI: Reset detected -- lbolt: 9338, bus: 8
SCSI: Reset detected -- lbolt: 9338, bus: 8
SCSI: Reset detected -- lbolt: 9338, bus: 8
SCSI: Reset detected -- lbolt: 9338, bus: 8
SCSI: Reset detected -- lbolt: 9339, bus: 8
SCSI: Reset detected -- lbolt: 9339, bus: 8
SCSI: Reset detected -- lbolt: 9339, bus: 8
SCSI: Reset detected -- lbolt: 9339, bus: 8
SCSI: Reset detected -- lbolt: 9340, bus: 8
SCSI: Reset detected -- lbolt: 9340, bus: 8
SCSI: Reset detected -- lbolt: 9340, bus: 8
SCSI: Reset detected -- lbolt: 9340, bus: 8
SCSI: Reset detected -- lbolt: 9341, bus: 8
SCSI: Reset detected -- lbolt: 9341, bus: 8
SCSI: Reset detected -- lbolt: 9341, bus: 8
SCSI: Reset detected -- lbolt: 9341, bus: 8
SCSI: Reset detected -- lbolt: 9342, bus: 8
SCSI: Reset detected -- lbolt: 9342, bus: 8
SCSI: Reset detected -- lbolt: 9342, bus: 8
SCSI: Reset detected -- lbolt: 9342, bus: 8
SCSI: Reset detected -- lbolt: 9343, bus: 8
SCSI: Reset detected -- lbolt: 9343, bus: 8
SCSI: Reset detected -- lbolt: 9343, bus: 8
SCSI: Reset detected -- lbolt: 9343, bus: 8
SCSI: Reset detected -- lbolt: 9344, bus: 8
SCSI: Reset detected -- lbolt: 9344, bus: 8
SCSI: Reset detected -- lbolt: 9344, bus: 8
SCSI: Reset detected -- lbolt: 9344, bus: 8
SCSI: Reset detected -- lbolt: 9345, bus: 8
SCSI: Reset detected -- lbolt: 9345, bus: 8
SCSI: Reset detected -- lbolt: 9345, bus: 8
SCSI: Reset detected -- lbolt: 9345, bus: 8
SCSI: Reset detected -- lbolt: 9346, bus: 8
SCSI: Reset detected -- lbolt: 9346, bus: 8
SCSI: Reset detected -- lbolt: 9346, bus: 8
SCSI: Reset detected -- lbolt: 9346, bus: 8
SCSI: Reset detected -- lbolt: 9347, bus: 8
SCSI: Reset detected -- lbolt: 9347, bus: 8
SCSI: Reset...
System Panic:
linkstamp: Fri Apr 16 08:01:18 MDT 2010
_release_version: @(#) $Revision: vmunix: vw: -proj selectors: CUPI80_BL2000_1108 -c 'Vw for CUPI80_BL2000_1108 build' -- cupi80_bl2000_1108 'CUPI80_BL2000_1108' Wed Nov 8 19:24:56 PST 2000 $
panic: I/O system hang
PC-Offset Stack Trace (read across, top of stack is 1st):
0x00208538 0x00381ec8 0x008bd2ec
0x0003fa98 0x0025d548 0x001636ec
0x00049f94 0x001b43b8 0x004cc0d4
0x004c6824 0x004c6984 0x004b277c
0x0006a3e0 0x004ac6ac 0x00487408
0x0048dc88 0x0048e060 0x00383574
0x00383328 0x003834bc 0x00383328
0x003834bc 0x00383328 0x003834bc
0x00383328 0x003834bc 0x00383328
0x003838f0 0x00387298 0x004595f4
0x00350760 0x001717ec 0x001f6564
End Of Stack
*** A system crash has occurred. (See the above messages for details.)
*** The system is now preparing to dump physical memory to disk, for use
*** in debugging the crash.
ERROR: Your system crashed before I/O and dump configuration was complete.
A crash dump cannot be taken under these circumstances without
special configuration. Contact your HP support representative.
********** VIRTUAL FRONT PANEL **********
System Boot detected
*****************************************
LEDs: RUN ATTENTION FAULT REMOTE POWER
FLASH FLASH FLASH ON ON
LED State: Unexpected Reboot. Running non-OS code. Non-critical error detected.
Check Chassis and Console Logs for error messages.
platform config 626F
processor slave rendezvous 1C17
processor test 1142
PDH INIT 3722
processor test 1100
processor test 1100
processor test 1100
Nem kene a 4 SCSI portot lezarnom 4 terminatorral?
Main Menu: Enter command or menu > SER
Service Menu: Enter command > SCSI
Path (dec) Initiator ID SCSI Rate Auto Term
------------ -------------- ---------- ---------------
0/0/1/0 7 Ultra Unknown
0/0/1/1 7 Ultra Unknown
0/0/2/0 7 Ultra Unknown
0/0/2/1 7 Ultra Unknown
0/3/0/0 7 Ultra Unknown
0/7/0/0/4/0 7 Ultra Unknown
0/7/0/0/4/1 7 Ultra Unknown
0/4/0/0/4/0 7 Ultra Unknown
0/4/0/0/4/1 7 Ultra Unknown
Service Menu: Enter command >
Main Menu: Enter command or menu > IN
Information Menu: Enter command > IO
I/O MODULE INFORMATION
Path Slot IODC
Type (dec) Number HVERSION SVERSION Vers
---- ----- ------ -------- -------- ----
System bus adapter 0 0x5820 0xb10 0x0
Local bus adapter 0/0 1 0x7820 0xa00 0x0
Local bus adapter 0/1 6 0x7820 0xa00 0x0
Local bus adapter 0/2 8 0x7820 0xa00 0x0
Local bus adapter 0/3 10 0x7820 0xa00 0x0
Local bus adapter 0/4 12 0x7820 0xa00 0x0
Local bus adapter 0/5 7 0x7820 0xa00 0x0
Local bus adapter 0/6 9 0x7820 0xa00 0x0
Local bus adapter 0/7 11 0x7820 0xa00 0x0
PCI DEVICE INFORMATION
Path Vendor Device Bus Slot
Description (dec) Id Id # #
----------- ----- ---- ---- --- ---
Ethernet cntlr 0/0/0/0 0x1011 0x19 0 1
SCSI bus cntlr 0/0/1/0 0x1000 0xb 0 1
SCSI bus cntlr 0/0/1/1 0x1000 0xb 0 1
SCSI bus cntlr 0/0/2/0 0x1000 0xf 0 1
SCSI bus cntlr 0/0/2/1 0x1000 0xf 0 1
Comp. ser cntlr 0/0/4/0 0x103c 0x1048 0 2
Comp. ser cntlr 0/0/5/0 0x103c 0x1048 0 2
SCSI bus cntlr 0/3/0/0 0x1000 0xc 24 10
SCSI bus cntlr 0/4/0/0/4/0 0x1000 0xb 33 12
SCSI bus cntlr 0/4/0/0/4/1 0x1000 0xb 33 12
Ethernet cntlr 0/4/0/0/6/0 0x1011 0x19 33 12
Ethernet cntlr 0/4/0/0/7/0 0x1011 0x19 33 12
PCI-to-PCI bridge 0/4/0/0 0x1011 0x26 32 12
SCSI bus cntlr 0/7/0/0/4/0 0x1000 0xb 57 11
SCSI bus cntlr 0/7/0/0/4/1 0x1000 0xb 57 11
Ethernet cntlr 0/7/0/0/6/0 0x1011 0x19 57 11
Ethernet cntlr 0/7/0/0/7/0 0x1011 0x19 57 11
PCI-to-PCI bridge 0/7/0/0 0x1011 0x26 56 11
Information Menu: Enter command >
Hmm, ugy latszik, jo lenne terminatorokat rakni a 2-SCSI portos HP-A5838-60001 kartyak vegere.
Hol tudok ilyen beszerezni?
Nem letezik valamilyen sw terminalas? Esetleg jumpereles?
Ardi